• KIEAE Journal
• /
• v.14 no.4
• /
• pp.127-131
• /
• 2014

The ground source heat pump (GSHP) system is a kind of the temperature differential energy system using relatively stable underground temperature as heat source of space heating and cooling. This system can achieve higher performance of system than it of conventional air source heat pump systems. However, its superiority of the system performance is different according to installation location or local climate, because the system performance depends on the underground condition which is decided by annual average air temperature. In this study, in order to estimate the feasibility of the ground source heat pump system according to the local climate, numerical simulation was conducted using the ground heat transfer model and the surface heat balance model. The case study was conducted in the condition of Seoul, Daejeon, and Busan, In the result, the heat exchange rate of Busan was 34.33 W/m as the largest in heating season and it of Seoul was 40.61 W/m as the largest in cooling.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.1
• /
• pp.63-69
• /
• 2005

The motion of animals and gymnasts in the air as well as free flying space robots without thrusters are subjected to nonholonomic constraints generated by the law of conservation of angular momentum. The purpose of this paper is to derive analytical posture control laws for free flying objects in the air. We propose the bang-bang control method for trajectory planning of a 3 link mechanical system with initial angular momentum. This technique is used to reduce the DOF (degrees of freedom) at first switching phase and to determine the control inputs to steer the reduced order system to the desired position. Computer simulations for motion planning of an athlete approximated by 3 link, namely platform diving, are provided to verify the effectiveness of the proposed control scheme.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.2
• /
• pp.39-46
• /
• 2004

Modern users demand that the on and off type solenoid actuator should be smaller, lighter in weight, lower in consumption power, and higher in response time. The complete design satisfying such requirements can be achieved when electromagnetic theories and empirical knowledge are combined. This paper presents various types of empirical coefficients essentially needed for optimal design of a solenoid actuator. The values of these empirical coefficients are obtained through extensive experiments over a great length of time for various kinds of solenoid actuators. We have developed a design program that is composed by combination of governing equations and empirical coefficients, and have also manufactured a prototype solenoid actuator based on the final results of the design program. The propriety of the design program and empirical coefficients have been proven by experiments.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.235-237
• /
• 2006

In this paper, the previous 2-D gradient coil design method using loop current elements is extended to 3-D or multi-layer structures which is useful for various MRI applications including MR microscopic imaging where relatively large space may be available for the implementation of the gradient coils. Either the power consumption or the stored energy (thus, inductance), or the combination of the two can be minimized with a set of chosen target field constraints. Complete 3-D design equations for the optimization as well as inductance or resistance calculation are derived. An effective coil shape correction method for a curved current pattern is also developed. The design method can also be easily extended to the active shielding structure.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.776-778
• /
• 1998

Electrical and optical characteristics of Powder type EL display(P-ELD) in this study are described, In experimental results of V-J, current are increased with increasing the frequency and voltage. Luminance was increased with frequency. This is due to the positive space charge formed to cathode region. Lumiance at 150V, 20 kHz has $840\;cd/m^2$. This tendency is due to the decrease of capacitive reactance in insulator layer. Uniformity of P-ELD shows 97%. CIE chromaticity with increasing frequency are shifted toward blue color. It can be explained in tenn of the difference of recombination energy.

• The Journal of Natural Sciences
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2007

An efficient sampling method of computer simulation is reviewed. Using the method, several thermodynamic states can be investigated at a time in a single simulation. It is due to the ability of the method to explore the relevant parts of configuration space equally for every state being investigated. The method can be used in simulations of complex systems such as biopolymers which are still greatly hampered by the multi-minima problem. In this article I present a brief theoretical review of the method and illustrate how to realize it in the simulations.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.27-30
• /
• 1997

1. Introduction : Molecular diffusion of small molecules in polymers plays an important role in many areas where polymers are acting as barriers, and in separation processes, such as selective diffusion. Different applications of polymers have different requirements on their transport properties. Therefore, reliable predictions of diffusion coefficients for small molecules in polymeric materials could be a useful tool to design appropriate materials. For many years, the theories based on free-volume concepts have been widely used to correlate and predict diffusion behavior in polymer/solvent systems. In the theory derived by Vrentas and Duda, the empty space between molecules that is available for molecular transport, referred to as hole free-volume, is being redistributed. Molecular transport will occur only when a free-volume of sufficient size appears adjacent to a molecule and the molecule has enough energy to jump into this void. The diffusive jump is considered complete when the void left behind is closed before the molecule returns to its original position. In this paper, the Vrentas-Duda free-volume theory is presented and the methods to estimate free-volume parameters for predicting polymer/ solvent diffusion coefficients are described in detail.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.89-92
• /
• 1996

In this paper, we developed visual tracking algorithm using double active bar. The active bar model to represent the object can reduce the search space of energy surface and better performance than those of snake model. However, the contour will not find global equilibrium when driving force caused by image may be weak. To overcome this problem. Double active bar is proposed for finding the global minimum point without any dependence on initialization. To achieve the goal, an deformable model with two initial contours in attempted to search for a global minimum within two specific initial contours. This approach improve the performance of finding the contour of target. To evaluate the performance, some experiments are executed. We can achieved the good result for tracking a object on noisy image.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1990-1993
• /
• 2005

Stereovision is known to be one of the most important tools for robot vision systems. Previously, 2D active contour model has been applied to stereovision by defining the contour on the 3D space instead of image plane. However, the proposed model is still that of curve so that some complex shapes such as surfaces with high curvature can not be properly estimated because of occlusion phenomena. In this paper, the authors extend the curve model to the surface model. The surface is approximated by polygons and new energy function and its optimization method for surface estimation is proposed. Its effectiveness is examined by experiments with real stereo images.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.204-207
• /
• 2003

The present paper reports high-fidelity simulation of direct initiation processes of cylindrical detonation waves by concentrated energy deposition. The goal is to understand the underpinning mechanisms in failed or successful detonation initiation processes. We employed the Space-Time CESE method to solve the reacting flow equations, including realistic finite-rate chemistry model of the nine species and twenty-four reactions for H$_2$-O$_2$-Ar mixtures. Detailed results of sub-critical, critical. and supercritical initiation process are reported.