• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1178-1182
• /
• 1993

Variable-displacement pumps are inherently more efficeint than fixed-displacement pumps under varying loads. Their energy-saving characteristics can be improved by the use of special control. This paper shows the improvement of the system by the use of load-sesing technique.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.114-120
• /
• 2012

Eco-driving technique for electric vehicles (EVs) is investigated in this paper. Many findings on EVs have been reported; however, they did not deal with eco-driving from the viewpoint of theoretical study. The authors have developed an energy-saving driving technique - the so-called "eco-driving" technique based on dynamic programming (DP). Optimal speed profile of an EV, which minimizes the amount of total energy consumption, was determined under fixed origin and destination, running time, and track conditions. DP algorithm can deal with such complicated conditions and can also derive the optimal solution. Using the proposed method, simulations were run for some cases. In particular, the author ran simulations for the case of a gradient road with a traffic signal. The optimization model was solved with MATLAB.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.911-919
• /
• 2013

This paper reports the development of test bed with the energy recovering technique using two-step boost converter. The device is utilized for LDC aging test of Hyundai Motor's LPI AVANTE HEV in mass production. The developed power recycle type test bed is designed as 1.5 kW class to test up to the maximum load power of LDC and is also designed to supply scant power supply up to 500 W after power recycle. The theoretical design analysis and operational characteristics analysis results of test bed are reported, and its practicality and reliability are verified through the test result. Also, the finally developed test bed confirms approximately 79~85 % energy saving effect compared to the usual traditional aging test system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.286-291
• /
• 2001

This paper describes an optimal scheduling for ice slurry systems for energy cost saving. The optimization technique applied in the study is the dynamic programming method, for which the state variable is the storage in the ice storage tank and the control variable is the state of chiller's on-off switching. Though the costs during charge period is included in optimization by taking the average cost of ice per hour for slurry making, the time horizon for the simulation is limited building cooling period because accurate charge rate from the ice maker into the ice storage tank cannot be estimated during the charge period. In the operating simulation after optimizing procedure, energy consumption and operating cost for the optimal control are calculated and compared with them for a conventional control with one case of cooling load profile.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.603-607
• /
• 2009

About a Structure is performance external insulation is fundamantal performance for enrgy-saving. these day, most of residential structures have constructed by internal insulation method structure. The method structure internal insulation have construction and economical efficiency, but on the other hand, be generated heat loss by heat bridge especially, be generated loss heat-energy logical consequence in structure ondol. The external insulation structure method has a mert able to minimum to loss heat about heat-bridge. But the external insulation technique is unsatisfactory statues within the know-how and method of construction and materials compared with developed countries. The recently, the requirement of market related to the external insulation technique is resulted by the energy efficiency system, but it can lead to the lack of alternative technique In study on the korea type passive house building design for insulation block method of wall system has to experimental characteristic heat-energy of practice building. In result field-experimental, the heat-bridge appeared to characteristic spent heat-energy of blow 2L class and have a suffience performance it.

• 에너지공학
• /
• 제27권3호
• /
• pp.28-35
• /
• 2018

세계 각국에서는 환경오염이나 에너지절감을 위한 방안으로 건축물에 대한 가이드라인과 제도적 지원이 활성화되고 있다. 우리나라에서도 2013.09.01. 개정된 "건축물의 에너지절약 설계기준"에 따라 기준들이 마련되고 신축 건축물에 대한 제로에너지빌딩화가 권장사항에서 의무화과정으로 가고 있다. 그럼에도 불구하고 소형건물에 대한 정부의 구속력은 미비한 실정이다. 이에 최근에 시공한 오피스건물(외단열기법 적용)에 대해 에너지 절감효과를 분석하였고 추가적으로 에너지 절감을 위한 이중외피기법을 제안하였다.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.535-537
• /
• 2009

As a kind of high Tc superconductor application technique, a study on the development of energy storage device system using BiPbSrCaCuO superconductor was performed. Chemical melt process was developed to gabricate the high magnetization superconductor which is needed to develop the energy saving system and the effect of various process variable on the superconducting properties of the specimens were tested and analyzed. Magnetochemical interactions between superconductor and permanent magnet was also experimented.

• 한국건축시공학회지
• /
• 제15권1호
• /
• pp.99-105
• /
• 2015

건축물은 전세계 총 에너지 소비 및 온실가스 방출의 1/3 이상을 차지하고 있어 건축물이 환경에 미치는 영향이 크다. 이에 따라 각 국가에서는 1997년 교토의정서에 의해 온실가스 배출량을 감축할 것을 의무화하였으며, 한국도 2014년 건축물 에너지 성능개선 방안을 발표한 바 있다. 본 연구는 에너지 절감이 가능한 친환경 건축물 기술분야의 주요 핵심기술을 소분류로 분류한 후, 한국, 미국, 일본 그리고 유럽에 공개된 특허문헌에 대한 특허동향분석을 수행하였다. 본 연구의 목적은 주로 친환경 건축물의 인증제도 그 자체에만 머무르고 있어서 세부적인 기술현황이나 연구개발방향을 정확하게 설정하지 못한다는 현재 기술의 문제점을 해결함으로써, 향후의 체계적인 R&D 방향제시 및 기술개발방향을 제시하는 것이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1238-1259
• /
• 2019

Saving energy is a big challenge for Wireless Sensor Networks (WSNs), which becomes even more critical in large-scale WSNs. Most energy waste is communication related, such as collision, overhearing and idle listening, so the schedule-based access which can avoid these wastes is preferred for WSNs. On the other hand, clustering technique is considered as the most promising solution for topology management in WSNs. Hence, providing interference-free clustering is vital for WSNs, especially for large-scale WSNs. However, schedule management in cluster-based networks is never a trivial work, since it requires inter-cluster cooperation. In this paper, we propose a clustering method, called Interference-Free Clustering Protocol (IFCP), to partition a WSN into interference-free clusters, making timeslot management much easier to achieve. Moreover, we model the clustering problem as a multi-objective optimization issue and use non-dominated sorting genetic algorithm II to solve it. Our proposal is finally compared with two adaptive clustering methods, HEED-CSMA and HEED-BMA, demonstrating that it achieves the good performance in terms of delay, packet delivery ratio, and energy consumption.

• 한국컴퓨터정보학회논문지
• /
• 제14권4호
• /
• pp.9-17
• /
• 2009

본 논문에서는 운영체제 수준에서 에너지 절감과 함께 I/O 성능 개선을 목적으로 하여 소형 하드 디스크와 플래시 메모리를 이종의 저장 장치로 가지는 모바일 시스템에 대해 동적 부하 분산 기법을 제안한다. 제안 기법은 부하가 에너지 및 성능 효율적인 방법으로 하드디스크와 플래시 메모리의 이종성의 저장 장치 구성에 대해서 어떻게 효율적으로 분산될 수 있을 것인지를 발견하기 위하여 파일 배치 기법과 버퍼 캐시 관리 기법을 결합하는 접근법을 취한다. 제안한 기법은 폭넓은 시뮬레이션을 통해서 기존의 기법들과 비교하여 이종의 모바일 저장장치들에 대해서 더 개선된 실험 결과를 보이는 것으로 나타났다.