• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.36-39
• /
• 1996

In chemical processes, measurement errors reduce the credibility of information and cause inconsistency in material and energy balances. Because multicomposition flows and temperature measurements make material and energy balances nonlinear equations, data reconciliation becomes a nonlinear constrained optimization problem. In multicomposition processes, if we follow general optimization procedure, the number of measurement variables is so large that data reconciliation requires much computation time. We propose the decomposition procedure to reduce the computation time without the decrease of accuracy of data reconciliation. Decomposition procedure finds global variables, that can reduce the nonlinearity of constraints, and divides two sub-optimization problems. Once we optimize the global variables at upper level, we can easily optimize the remain variables at tower level, We can obtain the short computational time and the same accuracy as SQP optimization method.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.411-418
• /
• 2004

Using a level set method we develop a shape optimization method applied to energy flow problems in steady state. The boundaries are implicitly represented by the level set function obtainable from the 'Hamilton-Jacobi type' equation with the 'Up-wind scheme.' The developed method defines a Lagrangian function for the constrained optimization. It minimizes a generalized compliance, satisfying the constraint of allowable volume through the variations of implicit boundary. During the optimization, the boundary velocity to integrate the Hamilton-Jacobi equation is obtained from the optimality condition for the Lagrangian function. Compared with the established topology optimization method, the developed one has no numerical instability such as checkerboard problems and easy representation of topological shape variations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.392-395
• /
• 1995

This paper presents a time efficient method for determining a sequence of locations of a mobile manipulator that facilitates tracking of continuous path in cluttered environment. Given the task trajectory in the form of octree data structure, the algorithm performs characterization of task space and subsequent multistage optimization process to determine task feasible locations of the robot. Firstly, the collision free portion of the trajectory is determined and classified according to uniqueness domains of the inverse kinematics solutions. Then by implementing the extent of task feasible subspace into an optimization criteria, a multistage optimization problem is formulated to determines the task feasible locations of the mobile manipulator. The effectiveness of the proposed method is shown through a simulation study performed for a 3-d.o.f. manipulator with generic kinematic structure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.184-184
• /
• 2017

A nation-wide water-energy-food (WEF) nexus simulation model has been developed by the authors and successfully applied to South Korea to predict the sustainability of those three resources in the next 30 years. The model was also capable of simulating future scenarios of resources allocation based on priority rules aiming to maximize resources sustainability. However, the process was still relying on several assumptions and trial-and-error approach, which sometimes resulted in non-optimal solutions of resources allocation. In this study, an optimization module was introduced to enhance the model in generating optimal resources management rules. The objective of the optimization was to maximize the reliability index of resources by determining the resources' allocation and/or priority rules for each demand type that accordingly reflect the resources management policies. Implementation of the optimization module would result in balanced allocation and management of limited resources and assist the stakeholders in deciding resources' management plans, either by fulfilling the domestic production or by global trading.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.1
• /
• pp.15-23
• /
• 2023

In this work, we deal with the feasibility of structural topology optimization for beam designs using retrofits that optimally allocates the reinforcement to the web under the condition that designers set bolt regions for H-beams of different dimensions. Mean compliance or minimal strain energy is considered for the optimization. Volume fraction is given to the design space to assign appropriate steel material quantities. The purpose of this study is to evaluate optimal shapes of stiffeners with the maximum rigidity that improves the axial and shear performance of the H-beam and to satisfy a given safety design standard of H-beam and stiffeners in case arbitrary load effect and resistances. Finally, the effectiveness of stiffness-based topology optimization on stiffeners is verified with several practical applicable examples.

• New & Renewable Energy
• /
• v.16 no.1
• /
• pp.15-24
• /
• 2020

For mechanical load testing of wind turbines, capture matrix is constructed for various range of wind speeds according to the international standard IEC 61400-13. The conventional method wastes considerable amount of data by its invalid data policy -segment data into 10 minutes then remove invalid ones. Previously, we have suggested an alternative way to save the total amount of data to build a capture matrix, but the efficient selection of data has been still under question. The paper introduces optimization algorithms to construct capture matrix with less data. Heuristic algorithm (simple stacking and lowest frequency first), population method (particle swarm optimization) and Q-Learning accompanied with epsilon-greedy exploration are compared. All algorithms show better performance than the conventional way, where the distribution of enhancement was quite diverse. Among the algorithms, the best performance was achieved by heuristic method (lowest frequency first), and similarly by particle swarm optimization: Approximately 28% of data reduction in average and more than 40% in maximum. On the other hand, unexpectedly, the worst performance was achieved by Q-Learning, which was a promising candidate at the beginning. This study is helpful for not only wind turbine evaluation particularly the viewpoint of cost, but also understanding nature of wind speed data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3321-3341
• /
• 2014

This paper investigates the outage performance and optimization for the four-phase two-way transmission network with an energy harvesting (EH) relay. To enable the simultaneous information processing and energy harvesting at the relay, we firstly propose a power splitting-based two-way relaying protocol (PSTWR). Then, we discuss its outage performance theoretically and derive an explicit expression for the system outage probability. In order to find the optimal system configuration parameters such as the optimal power splitting ratio and the optimal transmit power redistribution factor, we formulate an outage-minimized optimization problem. As the problem is difficult to solve, we design a genetic algorithm (GA) based algorithm for it. Besides, we also investigate the effects of the power splitting ratio, the power redistribution factor at the relay, and the source to relay distance on the system outage performance. Finally, extensive simulation results are provided to demonstrate the accuracy of the analytical results and the effectiveness of the GA-based algorithm. Moreover, it is also shown that, the relay position greatly affects the system performance, where relatively worse outage performance is achieved when the EH relay is placed in the middle of the two sources.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.3
• /
• pp.410-425
• /
• 1997

Buildings are mostly under part load conditions causing an inefficient system operation in terms of energy consumption. It is critical to operate building air-conditioning system with a scientific or optimal manner which minimizes energy consumption and maintains thermal comfort by matching building sensible and latent loads. Little research has been performed in developing general methodologies for the optimal operation of air-conditioning system. Based on this research motivation, system simulation program was developed by adopting various equipment operating strategies which are energy efficient especially for humidity control in summer. A numerical optimization technique was utilized to search optimal solution for multi-independent variables and then linked to the developed system simulation model within a mam program. The main goal of the study is to provide a systematic framework and guideline for the optimal operation of air-conditioning system focusing on air-side. For given cooling loads and ambient outdoor conditions the optimal operating strategies of a commercial building are determined by minimizing a constrained objective function by a nonlinear programming technique. Desired space setpoint conditions were found through evaluating the trade-offs between comfort and system power consumption. The results show that supply airflow rate and compressor fraction play main roles in the optimization process. It was found that variable setpoint optimization technique could produce lower indoor humidity level demanding less power consumption which will be benefits for building applications of humidity problem.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1015-1018
• /
• 2006

In this paper, new topology optimization technique is proposed. It mainly uses the strain energy distributions induced by the mode shapes associated with natural frequencies of the structure and so we can implicitly consider the dynamic characteristics of the structure in the topology optimization process. The strain energy to be minimized is employed as the objective function and the initial volume of structures is adopted as the constraint function. The resizing algorithm devised from the optimality criteria method is used to update the hole size of the cell existing in each finite element. The cantilever beam problem is adopted to test the proposed techniques. From numerical test, it is found to be that the optimum topology of the cantilever produced by the proposed technique has a hugh increase of natural frequency value and the technique is very effective to maximize the fundamental frequency of the structure.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.270-276
• /
• 2012

In this study, thermally coupled distillation system and conventional two-column process were investigated for extractive distillation. The two processes were simulated and optimized using Aspen plus. Objective function for the optimization was energy consumption and optimization results to reduce energy consumption were used to get guidelines for design and operation for the two extractive distillation processes. Comparison of these two processes showed that thermally coupled distillation system provided better energy efficiency and lower capital cost than conventional distillation system.