• Fire Science and Engineering
• /
• v.14 no.4
• /
• pp.7-16
• /
• 2000

In the study, three criteria(toxicity, fire & explosion, environment) and damage prediction method for each case was set up, and all these criteria were applied to the subject substance that was selected as hazardous level by integrating all criteria through Algorithm. Particularly, the environment criterion is a comprehensive concept, environment index modeling by combining USCG(United State Coast Guard) & MSDS(Material Safety Data Sheet) environment criteria classifications and the environment part of MFPA's health hazardousnes(Nh). And for damage prediction method of each criterion were adopted and they were applied to hazardous chemical substances in use or stored by chemical substance related enterprises located in each region that made possible to set up total hazard level of used substances(inflammability, poisonousness and counteraction on a unit substance, and hazard level & display modeling on environment) & damage prediction in case of accident & solidity setup(CPQRA: Chemical Process Quantitative Risk Assessment, IAEA: International Atomic Energy Agency, VZ eq: Vulnerable Zone) risk counter. Thus it is deemed that it can be applied to toxic substance leakage that can happen during any chemical processing & storage, application as a tool for prior safety evaluation through potential dangerousness computation of fire & explosion.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.103-107
• /
• 2005

An attempt was made to correlate the polymerization temperature and rheological and thermal properties of acrylonitrile (AN)-acrylamide (AM) copolymers. The copolymers were synthesized at different polymerization temperature. The copolymer structure was characterized by gel permeation chromatography (GPC) and Infrared spectrum (IR). The rheological and thermal properties were investigated by a viscometer and differential scanning calorimeter-thermogrametric (DSC-TG) analysis, respectively. When the polymerization temperature increased from $41^{\circ}C\;to\;65^{\circ}C$, the molecular weight $(\bar{M}_w)$ of copolymers decreased from 1,090,000 to 250,000, while its conversion increased from $18\%\;to\;63\%$, and the polymer composition changed slightly. To meet the requirements of carbon fibers, the rheological and thermal properties of products were also investigated. It was found that the relationship between viscosity and $\bar{M}_w$ was nonlinear and the viscosity index (n) decreased from 3.13 to 2.69, when the solution temperature increased from $30^{\circ}C\;to\;65^{\circ}C$. This suggests the dependence of viscosity upon $\bar{M}_w$ is higher at lower solution temperature. According to the result of activation energy, the sensivity of viscosity to solution temperature is higher for AN-AM copolymers synthesized at higher polymerization temperature. The result of thermal analysis shows that the copolymers obtained at higher polymerization temperature are easier to cyclization evidenced from lower initiation temperature. The weight loss behavior changed irregularly with polymerization temperature due to irregular change of liberation heat.

• Korean Journal of Remote Sensing
• /
• v.34 no.1
• /
• pp.25-43
• /
• 2018

The effects of hydro-meteorological and surface variables on the frequency of Asian dust events (FAE) were investigated using ground station and satellite-based data. Present weather codes 7, 8, and 9 derived from surface synoptic observations (SYNOP)were used for counting FAE. Surface wind speed (SWS), air temperature (Ta), relative humidity (RH), and precipitation were analyzed as hydro-meteorological variables for FAE. The Normalized Difference Vegetation Index (NDVI), land surface temperature (LST), and snow cover fraction (SCF) were used to consider the effects of surface variables on FAE. The relationships between FAE and hydro-meteorological variables were analyzed using Z-score and empirical orthogonal function (EOF) analysis. Although all variables expressed the change of FAE, the degrees of expression were different. SWS, LST, and Ta (indices applicable when Z-score was < 0) explained about 63.01, 58.00, and 56.17% of the FAE,respectively. For NDVI, precipitation, and RH, Asian dust events occurred with a frequency of about 55.38, 67.37, and 62.87% when the Z-scores were > 0. EOF analysis for the FAE showed the seasonal cycle, change pattern, and surface influences related to dryness condition for the FAE. The intensity of SWS was the main cause for change of FAE, but surface variables such as LST, SCF, and NDVI also were expressed because wet surface conditions suppress FAE. These results demonstrate that not only SWS and precipitation, but also surface variables, are important and useful precursors for monitoring Asian dust events.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.3
• /
• pp.195-204
• /
• 2010

Several quality parameters affecting Alaska pollack, Theragra chalcogramma, were measured and modeled kinetically under storage at different temperatures: the K-value, trimethylamine (TMA), volatile basic nitrogen (VBN), Torry meter, pH, acid value (AV), total viable cell count (TVC), and colony forming units (CFU) of Pseudomonas spp. The off-flavor development time (ODT) was also measured using the R-index sensory test and modeled kinetically. Among the quality parameters, the CFU of Pseudomonas spp. was an indicator of the ODT according to a similarity in the Arrhenius temperature dependence, which was derived as a criterion mathematically. The temperature dependence was represented by the Arrhenius's activation energy ($E_a$). On comparing the $E_a$ of the quality factors and the ODT, the similarity in the temperature dependence was found to be high in the order Pseudomonas spp., pH, VBN, TVC, K-value, TMA, AV, and Torry meter. Therefore, Pseudomonas spp. was identified as the primary indicator of ODT.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1158-1163
• /
• 2002

An Ge/B-doped optical fiber with high photosensitivity was fabricated to induce large second-order optical nonlinearity by UV poling. It was found that long period fiber gratings were inscribed on the fiber by the 248 nm KrF excimer laser irradiation with pulse energy of 116 mJ/$cm^2$ and pulse frequency of 10 Hz without hydrogen loading treatment. The photosensitivity was measured by use of the long period fiber grating pair method and the refractive index change of 3.3$10{\times}^{-3}$ was found to be induced in the core of the optical fiber by the KrF excimer laser irradiation of 8.67 kJ/$cm^2$. An H-shaped optical fiber was also fabricated for the UV poling through optimization of the fiber drawing condition.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.157-162
• /
• 2017

In large liquid crystal displays, the image quality in an oblique viewing direction is a crucial issue. From this perspective, 8-domain polymer-stabilized vertical alignment (PS-VA) mode has been developed to suppress the color shift in oblique viewing directions, compared to that in 4-domain PS-VA mode. To realize the 8-domain PS-VA, the four domains in a pixel are each divided into two regions, such that applying different electric potentials result in different tilt angles in these two regions, while keeping four azimuthal directions in each domain. However, applying different voltages in a pixel causes drawbacks, such as requiring additional processes to construct a capacitor and a transistor, which will further reduce the aperture ratio. Here we propose a different approach to form the 8-domain, by controlling surface polar anchoring energy and the width of patterned electrodes in two regions of a pixel. As a result, the gamma-distortion index (GDI), measured at an azimuthal angle of $0^{\circ}$, is reduced by about 23% and 8%, compared to that of a conventional 4-domain at polar angles of $30^{\circ}$ and $60^{\circ}$ respectively.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.1
• /
• pp.127-134
• /
• 2008

This study was designed to evaluate the nutritional status and dietary problems of obese elementary students consuming unbalanced diets. Blood parameters, body-image perceptions, taste preferences, and nutrient intakes of 40 obese elementary students with unbalanced diets were compared to those of 40 additional obese elementary students as a control. The averages for age, height, weight, and obesity index were 11.5 years, 142.0 cm, 51.0 kg, and 35.4% in the study group and 11.8 years, 144.0 cm, 53.5 kg, and 36.3% in the control group, respectively. The major disliked foods by the students in the study group were vegetables (65%) particularly Kimchi (15%), as well as fish(15%), and pulses (10%). Mean serum cholesterol, blood glucose, GOT/GPT, and hemoglobin levels were 175.1 mg/dL, 89.2 mg/dL, 24.1/18.9 IU/L, and 14.3 g/dL in the study group and 182.8 mg/dL, 91.3 mg/dL, 28.3/33.9 IU/L, and 14.7 g/dL, in the control group, respectively. Approximately 60${\sim}$80% of the subjects responded that they eat a meal everyday, and the remainder skipped at least one meal. The preference for salty tasting foods was significantly lower in the study group, but the preference for hot tasting food was higher as compared to the obese control group(p<0.05, p<0.05). The daily energy intakes of the study and control groups were 1,768.3 kcal and 1,572.7 kcal, respectively, but there was no significant differences between them. Daily intakes of animal protein, fat, animal fat, and vitamin $B_2$ were significantly higher in the study group than in the control group. In conclusion, this study found that obese children consuming unbalanced diets strongly disliked vegetables, particularly Kimchi, as well as hot tasting foods; however, they preferred salty foods. Daily intakes of animal protein and fat were higher in the study group as compared to obese children not consuming unbalanced diets.

• Nuclear Engineering and Technology
• /
• v.44 no.4
• /
• pp.369-378
• /
• 2012

A load-following operation in APR+ nuclear plants is necessary to reduce the need to adjust the boric acid concentration and to efficiently control the control rods for flexible operation. In particular, a disproportion in the axial flux distribution, which is normally caused by a load-following operation in a reactor core, causes xenon oscillation because the absorption cross-section of xenon is extremely large and its effects in a reactor are delayed by the iodine precursor. A model predictive control (MPC) method was used to design an automatic load-following controller for the integrated thermal power level and axial shape index (ASI) control for APR+ nuclear plants. Some tracking controllers employ the current tracking command only. On the other hand, the MPC can achieve better tracking performance because it considers future commands in addition to the current tracking command. The basic concept of the MPC is to solve an optimization problem for generating finite future control inputs at the current time and to implement as the current control input only the first control input among the solutions of the finite time steps. At the next time step, the procedure to solve the optimization problem is then repeated. The support vector regression (SVR) model that is used widely for function approximation problems is used to predict the future outputs based on previous inputs and outputs. In addition, a genetic algorithm is employed to minimize the objective function of a MPC control algorithm with multiple constraints. The power level and ASI are controlled by regulating the control banks and part-strength control banks together with an automatic adjustment of the boric acid concentration. The 3-dimensional MASTER code, which models APR+ nuclear plants, is interfaced to the proposed controller to confirm the performance of the controlling reactor power level and ASI. Numerical simulations showed that the proposed controller exhibits very fast tracking responses.

• Journal of the Korean Dietetic Association
• /
• v.10 no.2
• /
• pp.174-183
• /
• 2004

This analysis was performed to investigate the relationship between nutrition and anthropometric indices using the data from a cross-sectional survey of a large national sample, '98 Korean national health and nutrition examination survey. Subjects were selected by stratified multistage probability sampling design and completed dietary questionnares including food intakes for one day by 24-hour recall method. For this analysis, 6566 subjects were selected by age(over 20 years old). For anthropometry, height, weight, and waist- and hip- circumference were measured. They were classified by body mass index(BMI, weight(Kg)/$height^2 $($m^2 $)) and waist-hip ratio(WHR, waist circumference(Cm)/hip circumference(Cm)). The nutrients intake of subjects were compared with the recommended daily allowances(RDA). Mean adequacy ratio(MAR) was calculated. Mean heights, weights, BMIs were higher in the groups with nutrient intake over 125% of RDA than the lower intake groups for most nutrients. However, Mean WHR was the highest in the groups with nutrient intake under 75% of RDA for most nutrients excluding iron intake of women aged 20-64 years. Among women aged 20-64 years, means of MAR were 0.71 for obese individuals(BMI>30), 0.72 for subjects with underweight(BMI<18.5), and 0.76 for subjects with normal weight(18.5$\leq$BMI<25). Normal subjects has statistically significantly higher MAR than those of other groups. However, among elderly people aged over 65 years, obese group had the highest MAR, 0.68. Women with abdominal obesity(WHR>0.9) had lower MAR, 0.71 than those with normal weight(MAR=0.76). From these results, obesity and abdominal obesity seems to be the results of malnutrition including both undernutrition and overnutrition rather than simple problem of excess energy intake. Obesity in elderly people needs to be handled differently from adults.

• 보존과학연구
• /
• s.17
• /
• pp.123-160
• /
• 1996

There have been many studies and experiments regarding exhibition lighting. Many experiments on photochemical damaging effect and visibility resulted in a practice limited to assigning light levels and adjusting annual exposure time. The three damaging factors to the artifacts are intrinsicsusceptibility to absorb radiant energy, spectral distribution of light source and intensity of illumination and time of exposure. Dividing all the artfacts into three categories to suggest a recommended illuminance level causes some problems. Blue wool, for example, used as the reference material for susceptibility, is not a standard material representing museum artifacts. In the most light sensitive category, ISO class I or anything below have been excluded. The exposure time of one soure can be three times more than another sourece. The spectral distribution of the light source and the relative spectral responsibility of the artifact are not considered in the practice. So in case of very light sensitive material, the recommended illuminance is only the referring value and it is indispensable to check the characteristic of susceptibility of each artifacts. Daylighting is prevailing method to solve the psychological need of the visitors. However, it sould transparent, and should not diffused, and the green-house effect must be considered. llluminance uniformity should based on the maximum illuminance to handle the limitation of exposure for the conservation of a large sensitive object such as a painting. Damage index is not absolute reference for selecting the lighting source because it is experimented from the paper of low grade then calculated. Visibility should be increased by reducing the visual noiseand by planning of appropriate luminance contrast. This paper reviews the problems with the previous studies and experiment sand the current exhibition lighting design practice. The plan for museum showcase lighting is to check the susceptibility and to raise the visibility simultaneously.