• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.311-316
• /
• 2004

LMTT는 항만 자동화를 위한 수평 이송이 가능하도록 설계된 셔틀카(shuttle car)와 격자구조의 레인에 부착된 스테이터 모듈 (stator module)로 구성된 PMLSM(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다 본 논문에서는 강도기준을 고려하고 경량화 설계를 위하여 셸(shell) 요소로 유한요소 모델링된 이동체(mover)의 구조최적설계를 수행하였다. 설계변수로는 가로 빔, 세로 빔, 휠 빔의 두께와 높이 방향의 치수를 결정하는 형상 변수를 포함시켰다. 목적함수로는 중량, 제한조건 함수로는 안전율이 고려된 응력으로 실정하였다.

• 복식
• /
• 제59권5호
• /
• pp.41-52
• /
• 2009

In contemporary art, soft materials are used in various forms and ways as a medium expressing contingency beyond a simple nature of materials. In the late 1960's, the appearance of soft sculpture as a refusal of the stereotyped 'Erection' characteristic of traditional sculpture served as an opportunity for more attention to soft materials. Fashion is the reflection of age, and the mirror of society, culture and arts. In other words, soft sculpture and fashion are artistic behaviors in the same context, which have neither been fixed nor erected. This study finds its significance in analyzing correlation between soft sculpture and fashion, and the importance of contingency as artistic expression means in this age when boundaries between genres are obscure, and artistic values are given to fashion. By doing so, it aims to present the direction toward which fashion should face in the future, establishing a new aesthetic consciousness with which more creative and various expressions are available in fashion as well. This study presented as its theoretical background the concept of soft sculpture affected by Marcel Duchamp among representative examples of the contingency that started to appear in art starting in the early 20th century. It also analyzed the soft sculpture appeared in 1960s and the expression methods and features of contingency appeared in fashion after late 1990s through a new approach of piling up, hanging up, and tying, three categories classified by Maurice $Fr{\acute{e}}churet$. Common features of the contingency expressed in soft sculpture and fashion were derived in the analysis, which are intensive effects of energy, values given to physical properties themselves, and esthetics of anti-form.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.135-147
• /
• 2004

This study was conducted to investigate the technical factors of Lu Yu Fu vault actually performed by three men gymnasts participated in artistic gymnastics competition of 2003 summer Universiade in Daegu through the DLT method of three dimensional cinematography. To analyze these vaults, the instant events of Lu Yu Fu were set in the board touchdown(BTD), the board takeoff(BTO), the horse touchdown(HTD), the horse takeoff(HTO), the peak height(PH), the mat touchdown(MTD) respectively and the phases of that vault were set in the board contact(BC), the preflight(PRF), the horse contact(HC), the postflight(POF), the grounding on mat(GM) respectively After calculating the performance times, the CG displacement velocity, the kinetic energy impulse reaction force moment arm torque at the horse, the released angle piked angle addressed angle, the angular momentum angular velocity of whole body in x axis, and the horizontal displacement between the feet and CG, the following conclusions were reached. To perform the better Lu Yu Fu vault, a gymnast must have the large horizontal velocity of whole body with fast run-up, decrease the duration time and the horizontal vertical displacement of whole body in PRF, have the enough time to judge the correct magnitude and direction of force to brake or push the horse so as to lengthen the HC duration time at any cost. Also it is desirable to increase the horizontal vertical displacement of whole body in POF if possible, maintain the adequate piked position to decrease the angular velocity of whole body in x axis, prepare the grounding on mat previously and delay the release of the hand from the body to keep the angular momentum.

• 대한기계학회논문집A
• /
• 제39권7호
• /
• pp.701-706
• /
• 2015

본 논문에서는 격자가 있는 광경화성수지와 폴리아세테이트 수지의 레이저 접합해석에 대한 실험적 결과와 컴퓨터시뮬레이션 결과를 비교분석하였다. 3차원 격자형상은 MJM 방식의 3D 프린터를 사용하였고, 접합은 다이오드 레이저를 사용하였다. 5Watt ~ 7Watt 범위에서 경계면에 조사된 레이저는 유리천이온도에 도달 후 상면의 격자사이로 침투되어 기계적인 접합이 이루어졌다. 컴퓨터 시뮬레이션 결 과, 분포 온도를 통해서 열유동방향을 예측할 수 있었으며 분석을 통해서 접합의 원리를 이해할 수 있었다. 접합실험에서 최대 입열조건인 고출력 저속에서의 2scan 접합이 최소 입열조건이 저출력 고속 조건의 4 scan 보다는 훨씬더 효과적인 것으로 나타났고, 일정수준(Threshold) 이상의 최소에너지 즉, 유리천이온도 이상이 되어야만 효과적인 것을 알 수가 있었다.

• 천문학회보
• /
• 제40권1호
• /
• pp.66.3-67
• /
• 2015

Without scrutinizing reflection, the plasma comprising a coronal loop is usually regarded to reside within a flux rope. This picture seems to have been adopted from laboratory plasma pinches, in which a plasma of high density and pressure is confined in the vicinity of the flux rope axis by magnetic tension and magnetic pressure of the concave inward magnetic field. Such a configuration, in which the plasma pressure gradient and the field line curvature vector are almost parallel, however, is known to be vulnerable to ballooning instabilities (to which belong interchange instabilities as a subset). In coronal loops, however, ideal MHD (magnetohydrodynamic) ballooning instabilities are impeded by a very small field line curvature and the line-tying condition. We, therefore, focus on non-ideal (resistive) effects in this study. The footpoints of coronal loops are constantly under random motions of convective scales, which twist individual loop strands quite randomly. The loop strands with the axial current of the same direction tend to coalesce by magnetic reconnection. In this reconnection process, the plasma in the loop system is redistributed in such a way that a smaller potential energy of the system is attained. We have performed numerical MHD simulations to investigate the plasma redistribution in coalescence of many small flux ropes. Our results clearly show that the redistributed plasma is more accumulated between flux ropes rather than near the magnetic axes of flux ropes. The Joule heating, however, creates a different temperature distribution than the density distribution. Our study may give a hint of which part of magnetic field we are looking to in an observation.

• 한국전산구조공학회논문집
• /
• 제28권1호
• /
• pp.63-69
• /
• 2015

본 연구에서는 페이즈 필드법을 기반으로 하는 위상 최적설계 방법을 통하여 적외선 스텔스 효과를 위한 적외선 반사층의 설계를 진행하였다. 이를 위하여 수직으로 입사하는 적외선 파를 반사층에서 반사되어 원하는 방향으로 전파되도록 모델링을 하였다. 전파 방향에 측정 영역을 설정하여 해당 영역에서의 목적함수 값을 최대화하도록 설계가 진행되었으며, 이때 목적함수는 전자기파의 에너지 흐름을 나타내는 포인팅 벡터(Poynting vector)로 설정하였다. 페이즈 필드법 기반의 방법에서의 여러 파라미터 값들을 변경해 가며 설계 결과를 도출하였고, 목적함수 값을 최대화하는 모델을 최적 모델로 선정하였다. 선정된 최적 모델에서 gray scale을 cut-off 방법으로 제거한 경우 더 좋은 결과를 얻을 수 있었다. 또한 중적외선 영역에서의 효과를 고려하기 위하여 입사되는 파장을 바꿔가며 얻은 해석결과를 검토하였다. 본 연구의 유한요소해석 및 최적화 과정은 상용 프로그램인 COMSOL과 Matlab을 연동하여 수행하였다.

• 한국농공학회논문집
• /
• 제57권3호
• /
• pp.9-19
• /
• 2015

Internal air temperature of greenhouse is an important variable that can be influenced by the complex interaction between outside weather and greenhouse inside climate. This paper focuses on a data-based model approach to predict internal air temperature of the greenhouse. External air temperature, solar radiation, wind speed and wind direction were measured next to an experimental greenhouse supported by the Electronics and Telecommunications Research Institute and used as input variables for the model. Internal air temperature was measured at the center of three sections of the greenhouse and used as an output variable. The proposed model consisted of a transfer function including the four input variables and tested the prediction accuracy according to the sampling interval of the input variables, the orders of model polynomials and the time delay variable. As a result, a second-order model was suitable to predict the internal air temperature having the predictable time of 20-30 minutes and average errors of less than ${\pm}1K$. Afterwards mechanistic interpretation was conducted based on the energy balance equation, and it was found that the resulting model was considered physically acceptable and satisfied the physical reality of the heat transfer phenomena in a greenhouse. The proposed data-based model approach is applicable to any input variables and is expected to be useful for predicting complex greenhouse microclimate involving environmental control systems.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.61.1-61.1
• /
• 2010

$CuIn_{1-x}-GaxSe_2$ based materials with direct bandgap and high absorption coefficient are promising materials for high efficiency hetero-junction solar cells. CIGS champion cell efficiency(19.9%, AM1.5G) is very close to polycrystalline silicon(20.3%, AM1.5G). A reduction in the price of CIGS module is required for competing with well matured silicon technology. Price reduction can be achieved by decreasing the manufacturing cost and by increasing module efficiency. Manufacturing cost is mostly dominated by capital cost. Device properties of CIGS are strongly dependent on doping, defect chemistry and structure which in turn are dependent on growth conditions. The complex chemistry of CIGS is not fully understood to optimize and scale processes. Control of the absorber grain size, structural quality, texture, composition profile in the growth direction is important to achieving reliable device performance. In the present work, CIS nanoparticles were prepared by a simple wet chemical synthesis method and their structural and optical properties were investigated. XRD patterns of as-grown nanopowders indicate CIS(Cubic), $CuSe_2$(orthorhombic) and excess selenium. Further, as-grown and annealed nanopowders were characterized by HRTEM and ICP-OES. Grain growth of the nanopowders was followed as a function of temperature using HT-XRD with overpressure of selenium. It was found that significant grain growth occurred between $300-400^{\circ}C$ accompanied by formation of ${\beta}-Cu_{2-x}Se$ at high temperature($500^{\circ}C$) consistent with Cu-Se phase diagram. The result suggests that grain growth follows VLS mechanism which would be very useful for low temperature, high quality and economic processing of CIGS based solar cells.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.112.2-112.2
• /
• 2010

지구의 온난화로 인한 기상변화 등이 계속적으로 발생하는 가운데 전 세계는 지구 온난화의 가장 근본적인 원인인 이산화탄소의 방출을 줄이기 위한 방안을 찾기 위해 많은 노력을 하고 있다. 이에 대해 전 세계적으로 각종의 기후협약 체결, 리우선언, 도쿄의정서 등을 통해 온실가스 배출원인인 석유 등 화석에너지 배출을 억제하기 위한 활동이 행해지고 있으며, 기존의 화석연료를 대체할 수 있는 새로운 에너지를 발견하기 위한 연구개발에도 박차를 가하고 있다. 이러한 계속적인 연구개발에서, 세계의 국가들은 친환경 에너지인 태양열, 풍력, 지열 및 수소에너지와 같이 화석연료를 대체할 수 있는 다양한 에너지를 조사하고 개발해왔고 현재도 가장 적합한 에너지 자원을 찾기 위하여 노력 중에 있다. 최근에, 수많은 대체에너지 중 수소 에너지는 유해배출가스가 없기 때문에 가장 유망한 대안이라고 판단되어 전 세계가 수소에너지 연구개발에 주목하고 있다. 이러한 수소에너지를 교통수단에 적용하기 위하여 전 세계적으로 안전성 및 기술 확보를 위한 기술개발과 안전기준의 확립하기 위해 노력하고 있다. 현재 기술적으로 수소를 자동차용 연료로 사용하기 위해서는 수소를 액체 상태 및 압축 상태로 저장하는 것이다. 두 가지 저장방법 중 세계 대부분의 자동차 메이커들은 수소를 압축하는 방식을 채택하고 있으며, 자동차의 주행거리를 최대한 확보하기 위하여 수소가스를 고압으로 압축한 상태로 저장하는 방식을 사용하고 있다. 이에 따라 고압의 수소를 안전하게 저장할 수 있는 고압수소용기의 개발이 필요하다. 수소연료전지 자동차에 장착이 가능한 고압으로 압축된 수소를 저장할 수 있고, 자동차에 탑재할 수 있도록 적합한 크기의 가벼운 용기의 개발이 진행되어지고 있다. 자동차용 용기는 크게 4가지 타입으로 구분지어 진다. 현재는 4가지 타입의 압축용기 중 안전성과 중량을 만족시키기 위해 Type3와 Type4 형태의 용기가 수소자동차에 시범적으로 적용되어 운용되고 있다. 또한 고압수소용기의 신뢰성과 안전성을 확보하기 위한 기준 및 코드가 국 내외에서 연구 개발되고 있다. 본 연구에서는 수소연료전지자동차에 장착되는 고압수소용기의 국제기준 동향에 따른 국내의 차량용 고압수소용기를 위한 KGS 안전기준의 개발현황과 개발방향을 제시하고자 한다.

• Journal of Korean Neurosurgical Society
• /
• 제61권2호
• /
• pp.258-266
• /
• 2018

Objective : The diagnosis of insufficiency fractures of the sacrum in an elder population increases annually. Fractures show very different morphology. We aimed to classify sacral insufficiency fractures according to the position of cortical break and possible need for intervention. Methods : Between January 1, 2008 and December 31, 2014, all patients with a proven fracture of the sacrum following a low-energy or an even unnoticed trauma were prospectively registered : 117 females and 13 males. All patients had a computer tomography of the pelvic ring, two patients had a magnetic resonance imaging additionally : localization and involvement of the fracture lines into the sacroiliac joint, neural foramina or the spinal canal were identified. Results : Patients were aged between 46 and 98 years (mean, 79.8 years). Seventy-seven patients had an unilateral fracture of the sacral ala, 41 bilateral ala fractures and 12 patients showed a fracture of the sacral corpus : a total of 171 fractures were analyzed. The first group A included fractures of the sacral ala which were assessed to have no or less mechanical importance (n=53) : fractures with no cortical disruption ("bone bruise") (A1; n=2), cortical deformation of the anterior cortical bone (A2; n=4), and fracture of the anterolateral rim of ala (A3; n=47). Complete fractures of the sacral ala (B; n=106) : parallel to the sacroiliac joint (B1; n=63), into the sacroiliac joint (B2; n=19), and involvement of the sacral foramina respectively the spinal canal (B3; n=24). Central fractures involving the sacral corpus (C; n=12) : fracture limited to the corpus or finishing into one ala (C1; n=3), unidirectional including the neural foramina or the spinal canal or both (C2; n=2), and horizontal fractures of the corpus with bilateral sagittal completion (C3; n=8). Sixty-eight fractures proceeded into the sacroiliac joint, 34 fractures showed an injury of foramina or canal. Conclusion : The new classification allowes the differentiation of fractures of less mechanical importance and a risk assessment for possible polymethyl methacrylate leaks during sacroplasty in the direction of the neurological structures. In addition, identification of instable fractures in need for laminectomy and surgical stabilization is possible.