• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.4
• /
• pp.435-443
• /
• 2010

This study presents key parameters for the structure installed with MR controller in reducing its responses. MR controller is regarded as Bingham model of which control forces are frictional and viscous ones. The parameters are identified as friction force ratios, $R_f$ and $R_h$ which are, respectively, ratio of MR controller friction force to static restoring force for free vibration and ratio of the friction force to amplitude of harmonic force. Structure-MR controller system shows nonlinear response behavior due to friction force. Energy balance strategy is adopted to transform the behavior to linear one with equivalent damping ratio. Finally, proposed equivalent linear process is compared to the nonlinear one, which turns out to give acceptably good results.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.353-356
• /
• 2009

A pivotal mechanical balance of plant for 75kW class molten carbonate fuel cells comprise of a catalytic burner and an ejector which has been designed and tested in KEPRI(Korea Electric Power Research Institute). The catalytic burner, which oxidizes residual fuel in the anode tail gas, was operated at several conditions. Some problems arose due to local overheating or auto-ignition, which could limit the catalyst life. The catalytic burner was designed by considering both gas mixing and gas velocity. Test results showed that the temperature distribution is very uniform. In addition, an ejector is a fluid machinery to be utilized for mixing fluids, maintaining vacuum, and transporting them. The ejector is placed at mixing point between the anode off gas and the cathode off gas or the fresh air Several ejectors were designed and tested to form a suction on the fuel tail gas and balance the differential pressures between anode and cathode over a range of operating conditions. The tests showed that the design of the nozzle and throat played an important role in balancing the anode tail and cathode inlet gas pressures. The 75kW MCFC system built in our ejector and catalytic burner was successfully operated from Novembe, 2008 to April, 2009. It recorded the voltage of 104V at the current of 754A and reached the maximum generating power of 78.5kW DC. The results for both stand-alone and integration into another balance of plant are discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.263-270
• /
• 2004

A repeated $4{\times}4$ Latin square design was conducted with eight ileal cannulated castrates to examine the effect of source of starch and fiber on nutrient balance and energy metabolism. Pigs were fed on one of the four experimental diets: Control diet (C) mainly based on cooked rice; and diets P, S and W with the inclusion of either raw potato starch, sugar beet pulp or wheat bran supplementation, respectively. With the exception of an increased (p<0.05) energy loss from methane production with diet S observed, no significant differences (p>0.05) in the ratio of metabolizable energy (ME)/digestible energy, the utilization of ME for fat deposition and for protein deposition, energy loss as hydrogen and urinary energy were found between diets. The efficiency of utilization of ME for maintenance was lower (p<0.05) with diets P and S than with diet C. The inclusion of fiber sources (sugar beet pulp or wheat bran) or potato starch reduced the maintenance energy requirement. The fecal energy excretion was increased (p<0.05) with either sugar beet pulp or wheat bran supplementation, while it was unaffected (p>0.05) by addition of potato starch. In comparison with diets C and P, a lowered ileal or fecal digestibility of energy with diets S and W was observed (p<0.05). Feeding sugar beet pulp caused increased (p<0.05) daily production of methane and carbon dioxide and consequently increased energy losses from methane and carbon dioxide production, while it did not influence the daily hydrogen production (p>0.05). An increased (p<0.05) proportion of NSP excreted in feces was seen by the supplementation of wheat bran. Higher NSP intake caused an increased daily amount of NSP in the ileum, but the ileal NSP proportion as a percentage of NSP intake was unaffected by diets. Feeding potato starch resulted in increased daily amount of starch measured in the ileum and the proportion of ileal starch as a percentage of starch intake, while no significant influence on fecal starch was found. Higher (p<0.05) daily amount of fecal starch and the proportion of fecal starch as a percentage of starch intake were found with fiber sources supplementation compared with diets C and P. By increasing the dietary NSP content the fecal amount of starch increased (p<0.01).

• Korean Journal of Veterinary Research
• /
• v.41 no.3
• /
• pp.407-412
• /
• 2001

Milk data may be increasingly used as indicators of the protein-energy balance and actual farm feeding practices. It was related to milk production, nutritional and reproductive disorders. The purpose of this study was to investigate the relationship between level of fat, protein or milk urea nitrogen (MUN) from the first test within 35 days in milk and displaced abomasum (DA) in a large dairy herd with high yielding Holstein cows. Milk data from forty-five DA cases were compared to those from 90 healthy cows. Higher odds of DA diagnosis was found with higher 5.0% milk fat, lower 3.0% milk protein. Therefore, cows with a fat to protein ratio of>1.5 had higher risks for DA. Also, incidence rates of DA was higher in the cows which the level of MUN was lower than 12.0 mg/dl or higher than 25.0 mg/dl relative to healthy cows. These results indicate that cows diagnosed with DA were energy deficient prior to DA diagnosis. We conclude that level of fat, protein or MUN serve as a monitoring tool of protein and energy nutritional balance in early lactation cows and also as a significant predictor of risk for DA.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.133-144
• /
• 2011

The objective of this study is to analyze the characteristic of radiation environment in the urban and rural through the field observation in the summer. The radiation balance was compared through the measurement of the shortwave radiation and long-wave radiation in the urban, sub-urban, and rural. The following conclusion could be obtained from this research. (1)In the results of observation including the rain-day, it was found that the short wave radiance in the urban is lower about 10% than the rural. (2)The upper part of atmosphere layers in the urban are aabsorb much short wave radiation energies compared with the rural relatively. It can increase the temperature of the upper part of atmosphere layers and the emittance of long wave radiation. (3)The ratio of the downward short wave radiation to the downward long wave radiation was 1.24 for the urban, 1.28 for sub-urban and 1.35 for rural. It can be estimated that the atmosphere condition of the rural is better than that of other areas. (4)The net radiation of the rural was lower that of the urban. It was found that the energy in and outflow of the rural is easier than that of the urban. (5)The temperature variation for the long-wave radiation change of the rural showed more sensitive than that of the urban. It was came from the radiation characteristics of the surrounding environment and can be used as the important index to evaluate the thermal environment characteristic of urban.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1397-1405
• /
• 2009

In recent decades, exergy analysis has been holding spotlight as a useful tool in the design, assessment, optimization, and improvement of energy system. This paper presents the results of the energy and exergy analysis of a steam turbine cogeneration system for industrial complex using two efficiency concepts of conventional one and exergetic one. In order to obtain the destroyed exergy of each component, mathematical analysis is conducted by using exergy balance and the second law of thermodynamics, according as the parameters are changed, such as the ratio of returned process steam, process steam supplied, temperature and pressure of boiler and power. The computer program developed in this study can determine the efficiencies and exergy destroyed at each component of cogeneration system. As a result of this study, a component having the largest destroyed exergy was boiler. And closed and opened feedwater heater had the lowest one. The affects to the cogeneration system due to the variation of process steam flow and return rate of condensed water is shown that the total electric power efficiency(${\eta}_E$) is decreased as increasing the return rate of condensed water under constant process steam flow. As the boiler pressure is increased for the more production of electricity, the efficiency of cogeneration system was decreased.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.4
• /
• pp.21-31
• /
• 2001

When an oil-spilling accident occurs at sea, it is of the primary importance to predict the amount of oil leakage for the swift response and decision-making. The simplest method of oil-leakage estimation is based on the hydrostatic pressure balance between oil inside the tank and seawater outside of leakage hole, that is the so-called Torricelli equilibrium relation. However, there exists discrepancy between the reality and the Torricelli relation, since the latter is obtained from the quasi-steady treatment of Bernoulli equation ignoring viscous friction. A preliminary experiment has been performed to find out the oil-leaking speed and shape. Soy-bean oil inside the inner tank was ejected into water of the outer tank through four different leakage holes to record the amount of oil leakage. Furthermore, a CFD (Computational Fluid Dynamics) method was utilized to simulate the experimental situation. The Wavier-Stokes equations were solved for two-density flow of oil and water. VOF method was employed to capture the shape of their interface. It is found that the oil-leaking speed varies due to the frictional resistance of the leakage hole passage dependent on its aspect ratio. The Torricelli factor relating the speed predicted by using the hydrostatic balance and the real leakage speed is assessed. For the present experimental setup, Torricelli factors were in the range of 35%~55% depending on the aspect ratio of leakage holes. On the other hand, CFD results predicted that Torricelli factor could be 52% regardless of the aspect ratio of the leakage holes, when the frictional resistance of leakage hole passage was neglected.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.8
• /
• pp.1167-1173
• /
• 2009

This study was conducted to evaluate the effects of providing fermented soy protein to weaned pigs on nitrogen balance and apparent fecal and apparent ileal digestibility (AID) of AA. Four weaned ((Yorkshire${\times}$Landrace)${\times}$Duroc) barrows (BW = 6.58${\pm}$0.98 kg), surgically fitted with a simple T-cannula approximately 15 cm prior to the ileo-cecal junction, were fed four diets according to 4${\times}$4 Latin square design. Diets were a basal diet supplemented with one of the following: 3% SDPP (spray dried plasma protein), 5% RBP (soy protein fermented by Lactobacillus spp.), 5% PSP (soy protein fermented by Aspergillus oryzae and Bacillus subtilis), and 2.5% RPP (2.5% RBP+2.5% PSP). No differences were observed in DM and N intakes among treatments. However, the level of urine excretion was greater in the RPP group than in the PSP group. Additionally, fecal DM excretion, fecal N concentration and fecal N excretion were increased in the RBP, PSP and RPP groups when compared with the SDPP group (p<0.05). Furthermore, total excretion was increased in the RPP group when compared with the PSP group (p<0.05). In addition, N absorption and the N absorption ratio were higher in the SDPP group than in the RPP group (p<0.05). Moreover, the DM and N digestibilities were lower in the RBP, PSP and RPP groups than in the SDPP group (p<0.05), and the ash and energy digestibilities were higher in the SDPP and RBP groups than in the PSP and RPP groups (p<0.05). However, no significant differences were observed in the DM, N, Ash, Ca, P or ileal digestibilities among treatments, although the energy digestibility was higher in the SDPP group than the RBP group (p<0.05). In addition, the apparent ileal digestibilities of essential amino acids (Arg, His, Iso, Leu, Lys, Phe, Thr, and Val) were significantly higher in the SDPP group than in the other groups (p<0.05), and the levels of Ala, Cys, Glu and Try were greater in the SDPP treatment group than the RBP, PSP and RPP groups (p<0.05). Additionally, the levels of Asp, Gly and Ser were higher in the SDPP group than the PSP and RPP groups, and the level of Pro was higher in the SDPP group than the RPP group (p<0.05). Finally, total non-essential amino acid and total amino acid digestibility were higher in the SDPP group than in the other treatments (p<0.05). Taken together, the results of this study indicate that animal protein is more bioavailable than plant protein. However, the N absorption ratio and ileal digestibility were found to be similar in the SDPP and RBP groups.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.8
• /
• pp.945-956
• /
• 1999

This work reports a set of approximate analytical solutions describing the initial transient process of close-contact melting between a rectangular parallelepiped solid and a flat plate on which either constant temperature or constant heat flux is imposed. Not only relative motion of the solid block tangential to the heating plate, but also the density difference between the solid and liquid phase is incorporated in the model. The thin film approximation reduces the force balance between the solid weight and liquid pressure, and the energy balance at the melting front into a simultaneous ordinary differential equation system. The normalized model equations admit compactly expressed analytical solutions which include the already approved two-dimensional solutions as a subset. In particular, the normalized liquid film thickness is independent of all pertinent parameters, thereby facilitating to define the transition period of close-contact melting. A unique behavior of the solid descending velocity due to the density difference is also resolved by the present solution. A new geometric function which alone represents the three-dimensional effect is introduced, and its properties are clarified. One of the representative results is that heat transfer is at least enhanced at the expense of the increase in friction as the cross-sectional shape deviates from the square under the same contact area.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.184-188
• /
• 1999

Noise regulation of heavy construction machinery is getting stricter： 3 dB per every 4 year in European community. To meet this requirement many engineers have adopted the enclosing structures with thick absorbing materials and small opening, This increases internal temperature of the enclosure which have engine systems such as electric equipment that are vulnerable to heat, and engine block and muffler that can be regarded as heat sources. So noise control engineers have to consider a coupling problem: combining heat balance and noise reduction. This paper describes this approach by introducing simple heat transfer theory and SEA. The enclosing system of the loader whose enclosing structure consists of two rooms is investigated to show the validity of this method. The results represent that the simple heat transfer theory can be useful to estimate cooling performance when it is linked together by the back pressure theory in duct system. and the radiated noise can also be estimated by the SEA. Therefore a designer can use these approaches to define the opening ratio of an enclosure and the mass flow rate of air considering radiating noise.