• 한국식생활문화학회지
• /
• 제19권2호
• /
• pp.129-138
• /
• 2004

The changes in DNA damage were investigated during storage after irradiation. Beef, pork and chicken were irradiated at 1.0, 3.0 and 5.0 kGy and stored for 6 months at $-20^{\circ}C$. The comet assay was applied to the sample muscles at the beginning of irradiation and at the end of storage. Muscles were isolated, sliced, and the suspended cells were embedded in an agarose layer. After lysis of the cells, they were electrophoresed for 2 min. and then stained. DNA fragmentation in tissues caused by irradiation was quantified as tail length and tail moment (tail length ${\times}$ % DNA in tail) by comet image analyzing system. Right after irradiation, the differences in tail length between unirradiated and irradiated muscles were significant(p<0.05) in beef, pork and chicken. With increasing the increasing doses, statistically significant longer extension of the DNA from the nucleus toward anode was observed. Similarly even 6 months after irradiation, all the irradiated muscles significantly showed longer tail length than the unirradiated controls. The results represented as tail moment showed similar tendency to those of tail length, but the latter parameter was more sensitive than the former. These results indicate that the comet assay could be one of the simple methods of detecting irradiated muscles. Moreover, this method suggest that using comet assay, we were able to detect DNA damage differences even after 6 months after irradiation.

• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.265-273
• /
• 2012

Data stability and leakage power dissipation have become a critical issue in scaled SRAM design. In this paper, an advanced 8T SRAM cell improving the read and write stability of data storage elements as well as reducing the leakage current in the idle mode is presented. During the read operation, the bit-cell keeps the noise-vulnerable data 'low' node voltage close to the ground level, and thus producing near-ideal voltage transfer characteristics essential for robust read functionality. In the write operation, a negative bias on the cell facilitates to change the contents of the bit. Unlike the conventional 6T cell, there is no conflicting read and write requirement on sizing the transistors. In the standby mode, the built-in stacked device in the 8T cell reduces the leakage current significantly. The 8T SRAM cell implemented in a 130 nm CMOS technology demonstrates almost 100 % higher read stability while bearing 20 % better write-ability at 1.2 V typical condition, and a reduction by 45 % in leakage power consumption compared to the standard 6T cell. The stability enhancement and leakage power reduction provided with the proposed bit-cell are confirmed under process, voltage and temperature variations.

• 대한임베디드공학회논문지
• /
• 제12권3호
• /
• pp.185-192
• /
• 2017

Due to the characteristics of low power, high durability and high density, NAND flash memory is being heavily used in various type of devices such as USB, SD card, smart phone and SSD. On the other hand, because of another characteristic of flash cell with the limited number of program/erase cycles, NAND flash memory has a short lifetime compared to other storage devices. To overcome the lifetime problem, many researches related to the wear leveling have been conducted. This paper presents a method called a TCB (Tracking Cold Blocks) using more reinforced constraint conditions when classifying cold blocks than previous works. TCB presented in this paper keeps a MCT (Migrated Cold block Table) to manage the enhanced classification process of cold blocks, with which unnecessary migrations of pages can be reduced much more. Through the experiments, we show that TCB reduces the overhead of wear leveling by about 30% and increases the lifetime up to about 60% compared to BET and BST.

• 대한임베디드공학회논문지
• /
• 제4권2호
• /
• pp.79-83
• /
• 2009

Streaming Technology can support the real-time playback without downloading and storing multimedia data in local HDD. So, client browser or plug-in can represent multimedia data before the end of file transmission using streaming technology. Recently, the demand for efficient real-time playback and transmission of large amounts of multimedia data is growing rapidly. But most users' connections over network are not fast and stable enough to download large chunks of multimedia data. In this paper, we propose an intelligent IP streaming system based on personalized media service. The proposed IP streaming system enables users to get an intelligent recommendation of multimedia contents based on the user preference information stored on the streaming server or the home media server. The supposed intelligent IP streaming system consists of Server Metadata Agent, Pumping Server, Contents Storage Server, Client Metadata Agent and Streaming Player. And in order to implement the personalized media service, the user information, user preference information and client device information are managed under database concept. Moreover, users are assured of seamless access of streamed content event if they switch to another client device by implementing streaming system based on user identification and device information. We evaluate our approach with manufacturing home server system and simulation results.

• 전자공학회논문지CI
• /
• 제40권2호
• /
• pp.17-25
• /
• 2003

본 논문에서는 상태 변수 표현 방법에 따른 알고리즘 분할을 통해 2차원 웨이브렛 변환 연산을 실시간으로 처리할 수 있는 프로세서 구조를 제안하였다. 제안된 프로세서 구조는 영상입력에 대하여 행, 열 방향을 동시에 고려하여 데이터 플로우 방식으로 처리함으로써 중간적인 결과의 메모리 저장 및 읽기에 소요되는 전달 지연 시간을 감소할 수 있어 실시간 처리에 적합한 VLSI 구조이다. 필터의 길이를 K라할 때 프로세서는 내부에 4개의 곱셈기, 4개의 덧셈기 및 NK-N 크기의 메모리를 가지는 등의 하드웨어 복잡도가 낮아 웹 카메라 서버와 같은 내장형의 응용에 매우 적합한 구조이고, 쉽게 어레이 구조로 확장할 수 있어 고성능을 요구하는 다양한 영상 처리 응용에도 사용 가능하다.

• 대한임베디드공학회논문지
• /
• 제11권2호
• /
• pp.67-78
• /
• 2016

The emerging Spin-Transfer Torque RAM (STT-RAM) is a promising component that can be used to improve the efficiency as a result of its high storage density and low leakage power. However, the state-of-the-art STT-RAM is not ready to replace SRAM technology due to the negative effect of its write operations. The write operations require longer latency and more power than the same operations in SRAM. Therefore, a hybrid cache with SRAM and STT-RAM technologies is proposed to obtain the benefits of STT-RAM while minimizing its negative effects by using SRAM. To efficiently use of the hybrid cache, it is important to place write intensive data onto the cache. Such data should be placed on SRAM to minimize the negative effect. Thus, we propose a technique that optimizes placement of data in main memory. It drives the proper combination of advantages and disadvantages for SRAM and STT-RAM in the hybrid cache. As a result of the proposed technique, write intensive data are loaded to SRAM and read intensive data are loaded to STT-RAM. In addition, our technique also optimizes temporal locality to minimize conflict misses. Therefore, it improves performance and energy consumption of the hybrid cache architecture in a certain range.

• 대한임베디드공학회논문지
• /
• 제11권2호
• /
• pp.125-134
• /
• 2016

NAND flash memory has unique characteristics like as 'out-place-update' and limited lifetime compared with traditional storage systems. According to out-of-place update scheme, a number of invalid (or called dead) pages can be generated. In this case, garbage collection is needed to reclaim invalid pages. Because garbage collection results in not only erase operations but also copy operations of valid (or called live) pages to other blocks, many garbage collection techniques have proposed to reduce the overhead and to increase the lifetime of NAND Flash systems. This techniques sometimes select victim blocks including cold data for the wear leveling. However, most of them overlook the cost of selecting victim blocks including cold data. In this paper, we propose a garbage collection technique named CAPi (Cost Age with Proportion of invalid pages). Considering the additional overhead of what to select victim blocks including cold data, CAPi improves the response time in garbage collection and increase the lifetime in memory systems. Additionally, the proposed scheme also improves the efficiency of garbage collection by separating cold data from hot data in valid pages. In experimental evaluation, we showed that CAPi yields up to, at maximum, 73% improvement in lifetime compared with existing garbage collections.

• Journal of Computing Science and Engineering
• /
• 제2권4호
• /
• pp.375-393
• /
• 2008

The dynamic cast operation allows flexibility in the design and use of data management facilities in object-oriented programs. Dynamic cast has an important role in the implementation of the Data Management Services (DMS) of the Mission Data System Project (MDS), the Jet Propulsion Laboratory's experimental work for providing a state-based and goal-oriented unified architecture for testing and development of mission software. DMS is responsible for the storage and transport of control and scientific data in a remote autonomous spacecraft. Like similar operators in other languages, the C++ dynamic cast operator does not provide the timing guarantees needed for hard real-time embedded systems. In a recent study, Gibbs and Stroustrup (G&S) devised a dynamic cast implementation strategy that guarantees fast constant-time performance. This paper presents the definition and application of a cosimulation framework to formally verify and evaluate the G&S fast dynamic casting scheme and its applicability in the Mission Data System DMS application. We describe the systematic process of model-based simulation and analysis that has led to performance improvement of the G&S algorithm's heuristics by about a factor of 2. In this work we introduce and apply a library for extracting semantic information from C++ source code that helps us deliver a practical and verifiable implementation of the fast dynamic casting algorithm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.120-121
• /
• 2007

Nano-floating gate memory (NFGM) devices were fabricated by using the low temperature poly-Si thin films crystallized by ELA and the $In_2O_3$ nano-particles embedded in polyimide layers as charge storage. Memory effect due to the charging effects of $In_2O_3$ nano-particles in polyimide layer was observed from the TFT NFGM. The post-annealing in 3% diluted hydrogen $(H_2/N_2)$ ambient improved the retention characteristics of $In_2O_3$ nano-particles embedded poly-Si TFT NFGM by reducing the interfacial states as well as grain boundary trapping states.

• 대한임베디드공학회논문지
• /
• 제16권4호
• /
• pp.153-161
• /
• 2021

Real-time access is required to handle continuous and unstructured data and should be flexible in management under dynamic state. Platform can be built to allow data collection, storage, and processing from local-server or multi-server. Although the former centralize method is easy to control, it creates an overload problem because it proceeds all the processing in one unit, and the latter distributed method performs parallel processing, so it is fast to respond and can easily scale system capacity, but the design is complex. This paper provides data collection and processing on one platform to derive significant insights from various data held by an enterprise or agency in the latter manner, which is intuitively available on dashboards and utilizes Spark to improve distributed processing performance. All service utilize dockers to distribute and management. The data used in this study was 100% collected from Kafka, showing that when the file size is 4.4 gigabytes, the data processing speed in spark cluster mode is 2 minute 15 seconds, about 3 minutes 19 seconds faster than the local mode.