• 연구논문집
• /
• 통권28호
• /
• pp.123-135
• /
• 1998

A shape function for element free Galerkin method is carved from Shepard interpolant of singular weight and consistency condition. Thus present shape function is an interpolation and has no singularities. The shape function is applied to cantilever bending problems and gives good results in comparison with beam theory. Finally it is shown that the coupling with finite element method is made easily without any additional treaties.

• 전산구조공학
• /
• 제11권1호
• /
• pp.261-274
• /
• 1998

본 연구에서는 무요소방법에 적응적 해석기법을 적용하기 위한 부분 및 전체오차의 평가기법을 제안하였다. 본 연구에서 제안한 오차의 평가방법은 무요소방법에서 계산된 응력이 오차가 큰 영역에서 진동한다는 특성을 이용한 것으로 해석결과 얻어진 응력을 낮은 차수의 형상함수로 투사하는 후처리를 함으로써 가상진동모우드를 제거하고 이때 얻어진 투영응력과 원래의 응력을 비교하여 부분오차 및 전체오차를 구할 수 있다. 1차원 및 2차원 예제해석을 통하여 투영응력을 구할 때 가능한 한 작은 영향영역을 사용하는 것이 바람직하다는 것을 보였으며 이는 영향영역의 크기를 과도하게 설정할 경우 투영응력을 과대 평가할 수 있기 때문이다. 본 연구에서 제안한 오차의 평가기법은 다른 무요소 방법에 적용될 수 있다.

• Advances in nano research
• /
• 제7권2호
• /
• pp.99-108
• /
• 2019

Higher-order theories are very important to investigate the mechanical properties and behaviors of nanoscale structures. In this study, a free vibration behavior of SiNW resting on elastic foundation is investigated via Eringen's nonlocal elasticity theory. Silicon Nanowire (SiNW) is modeled as simply supported both ends and clamped-free Euler-Bernoulli beam. Pasternak two-parameter elastic foundation model is used as foundation. Finite element formulation is obtained nonlocal Euler-Bernoulli beam theory. First, shape function of the Euler-Bernoulli beam is gained and then Galerkin weighted residual method is applied to the governing equations to obtain the stiffness and mass matrices including the foundation parameters and small scale parameter. Frequency values of SiNW is examined according to foundation and small scale parameters and the results are given by tables and graphs. The effects of small scale parameter, boundary conditions, foundation parameters on frequencies are investigated.

• 한국전산유체공학회지
• /
• 제1권1호
• /
• pp.88-97
• /
• 1996

This paper treats an adaptive finite-element method for the viscous compressible flow governed by Navier-Stokes equations in two dimensions. The numerical algorithm is the two-step Taylor-Galerkin mettled using unstructured triangular grids. To increase accuracy and stability, combined moving node method and grid refinement method have been used for grid adaption. Validation of the present algorithm has been made by comparing the present computational results with the existing experimental data and other numerical solutions. Four benchmark problems are solved for demonstration of the present numerical approach. They include a subsonic flow over a flat plate, the Carter flat plate problem, a laminar shock-boundary layer interaction. and finally a laminar flow around NACA0012 airfoil at zero angle of attack and free stream Mach number of 0.85. The results indicates that the present adaptive triangular grid method is accurate and useful for laminar viscous flow calculations.

• Computers and Concrete
• /
• 제16권5호
• /
• pp.669-682
• /
• 2015

Degradation of reinforced concrete (RC) structures due to chloride penetration followed by reinforcement corrosion has been a serious problem in civil engineering for many years. The numerical simulation methods at present are mainly finite element method (FEM) and finite difference method (FDM), which are based on mesh. Mesh generation in engineering takes a long time. In the present article, the numerical solution of chloride transport in concrete is analyzed using radial point interpolation method (RPIM) and element-free Galerkin (EFG). They are all meshless methods. RPIM utilizes radial polynomial basis, whereas EFG uses the moving least-square approximation. A Galerkin weak form on global is used to attain the discrete equation, and four different numerical examples are presented. MQ function and appropriate parameters have been proposed in RPIM. Numerical simulation results are compared with those obtained from the finite element method (FEM) and analytical solutions. Two case of chloride transport in full saturated and unsaturated concrete are analyzed to test the practical applicability and performance of the RPIM and EFG. A good agreement is obtained among RPIM, EFG, and the experimental data. It indicates that RPIM and EFG are reliable meshless methods for prediction of chloride concentration in concrete structures.

• 한국전산구조공학회논문집
• /
• 제27권1호
• /
• pp.17-26
• /
• 2014

본 논문은 MLS(Moving Least Squares) 차분법을 바탕으로 동적균열전파 해석을 수행하기 위한 알고리즘을 제시한다. MLS 차분법은 절점만으로 이루어진 수치모델을 사용하며, 이동최소제곱법을 이용하여 전개한 Taylor 다항식을 기초로 미분근사식을 유도하기 때문에, 요소망의 제약에서 완벽하게 벗어난 절점해석이 가능하다. 시간항을 포함하는 동적 평형방정식은 Newmark 방법으로 시간적분 하였다. 동적하중을 받는 균열이 전파할 때, 매 시간단계마다 절점모델을 재구성하지 않고 균열선단 주변에서 국부적인 수정을 통해 해석이 가능하다. 동적균열을 묘사하기 위해 가시한계법(visibility criterion)을 적용하였고, 동적 에너지해방률을 산정하여 균열의 진전유무와 그에 상응하는 진전방향을 결정하였다. 모드 I 상태와 혼합모드 상태에서 균열이 진전하는 현상을 모사하였고, 이론해와 Element-Free Galerkin법으로 계산한 결과와의 비교를 통해 개발된 알고리즘의 정확성과 안정성을 검증하였다.

• 한국수자원학회논문집
• /
• 제32권3호
• /
• pp.237-246
• /
• 1999

자유수면 흐름의 모의를 위한 유한요소모형이 동수역학적 흐름방정식과 collocation 유한요소법에 의해 모의하였다. collocation 기법은 Hermite 다항식을 가진 접합점에서 적용이 되며, 메크릭스 방정식은 skyline 기법에 의해 해석하였다. 본 연구 모형은 마찰이 없는 수평수로에서의 정상도수, 비선형 표면전파 그리고 댐 파괴해석에 적용하였다. 계산결과 Bubnov-Galerkin 과 Petrov-Galerkin 기법과 비교하였다. 실제하천에 대한 적용성을 검토하기 위해서 북한강 유역에 적용하여 해석하였는데, 계산결과는 유량수문곡선에 있어서 기존의 DWOPER 모형의 결과와 일치하였다. Collocation 기법은 개수로 흐름에서의 점변 및 급변 부정류흐름을 모의하기 위해서 적절한 기법임을 확인할 수 있었다.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3152-3159
• /
• 1996

Previous works about the cylindrical shape elastic body which is under longitudinal temperature distribution mostly show the results of free expansion, therefore exact thermo-elastic analysis is needed. The object of this work is to analyze the thermo-elastic problem of the hollow cylinder when the cylinder is under longitudinal temperature distribution. In this paper, the analytical solution is found by using Galerkin vector, and it is compared by the results of FEM. For displacements of cylinder, analytical values are almost same as the results of FEM, but free expansion is not fit for analytical solution and the results of FEM. stresses from analytical solution and the results of FEM show good agreement also. but the results are different near the end boundary, since St. Venant principle is applied.

• Structural Engineering and Mechanics
• /
• 제3권1호
• /
• pp.61-74
• /
• 1995

A linearly tapered, doubly symmetric thin-walled closed member, such as power-transmission towers and tourist towers, are often characterized by local variation in mass and/or rigidity, due to additional mass and rigidity. On the preliminary stage of design the closed-form solution is more effective than the finite element method. In order to propose approximate solutions, the discontinuous and local variation in mass and/or rigidity is treated continuously by means of a usable function proposed by Takabatake(1988, 1991, 1993). Thus, a simplified analytical method and approximate solutions for the free and forced transverse vibrations in linear elasticity are demonstrated in general by means of the Galerkin method. The solutions proposed here are examined from the results obtained using the Galerkin method and Wilson-${\theta}$ method and from the results obtained using NASTRAN.

• Interaction and multiscale mechanics
• /
• 제6권2호
• /
• pp.257-270
• /
• 2013

The use of lightweight materials has been steadily increasing in the automotive industry, and presents new challenges to material joining. Among many joining processes, self-piercing riveting (SPR) is particularly promising for joining lightweight materials (such as aluminum alloys) and dissimilar materials (such as steel to Al, and metal to polymer). However, to establish a process window for optimal joint performance, it often requires a long trial-and-error testing of the SPR process. This is because current state of the art in numerical analysis still cannot effectively resolve the problems of severe material distortion and separation in the SPR simulation. This paper presents a coupled meshfree/finite element with a moving boundary algorithm to overcome these numerical difficulties. The simulation results are compared with physical measurements to demonstrate the effectiveness of the present method.