• Journal of Oriental Neuropsychiatry
• /
• v.21 no.4
• /
• pp.151-161
• /
• 2010

Objectives : This study aimed to evaluate any clinical studies regarding the herbal medicine for dementia focusing on Korean literature for future rigorous clinical research. Methods: Every article relevant to dementia was initially obtained from oriental medical related journals by electronic search at journal web sites or manual searches. Journals were limited to those registered with the Korea Research Foundation. From initial findings. two independent reviewers selected clinical articles and these articles were further analyzed separately by predefined criteria according to prospective and retrospective studies. For randomized controlled trial and non randomized controlled trial. quality assessment was also conducted. Results: From ninety seven patients initially obtained articles. twenty three patients were finally analyzed. One article was randomized controlled study. Four articles were prospective whereas eighteen patients were retrospective. In the qualitative evaluation of prospective articles. there was deduction regarding pre-calculated study size and prospective data collecting. Assessment measurement most frequently used was Mini Mental State Examination. The order of frequency of use herbs were identified. Conclusions : According to our study. the herbal medicine for dementia in general showed a positive effect in the cognitive aspects of dementia patients. Further well-designed randomized controlled studies should be conducted.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3335-3356
• /
• 2015

In this paper, we analyze the connectivity of cognitive radio ad-hoc networks in a log-normal shadow fading environment. Considering secondary user and primary user's locations and primary user's active state are randomly distributed according to a homogeneous Poisson process and taking into account the spectrum sensing efficiency of secondary user, we derive mathematical models to investigate the connectivity of cognitive radio ad-hoc networks in three aspects and compare with the connectivity of ad-hoc networks. First, from the viewpoint of a secondary user, we study the communication probability of that secondary user. Second, we examine the possibility that two secondary users can establish a direct communication link between them. Finally, we extend to the case of finding the probability that two arbitrary secondary users can communicate via multi-hop path. We verify the correctness of our analytical approach by comparing with simulations. The numerical results show that in cognitive radio ad-hoc networks, high fading variance helps to remarkably improve connectivity behavior in the same condition of secondary user's density and primary user's average active rate. Furthermore, the impact of shadowing on wireless connection probability dominates that of primary user's average active rate. Finally, the spectrum sensing efficiency of secondary user significantly impacts the connectivity features. The analysis in this paper provides an efficient way for system designers to characterize and optimize the connectivity of cognitive radio ad-hoc networks in practical wireless environment.

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1072-1079
• /
• 2005

Conceptual design is the first step in the overall process of product design. Its intrinsic uncertainty, imprecision, and lack of information lead to the fact that current conceptual design activities in engineering have not been computerized and very few CAD systems are available to support conceptual design. In most of the current intelligent design systems, approach of principle synthesis, such as morphology matrix, bond graphic, or design catalogues, is usually adopted to deal with the concept generation, in which optional concepts are generally combined and enumerated through function analysis. However, as a large number of concepts are generated, it is difficult to evaluate and optimize these design candidates using regular algorithm. It is necessary to develop a new approach or a tool to solve the concept generation. Generally speaking, concept generation is a problem of concept synthesis. In substance, this process of developing design candidate is a combinatorial optimization process, viz., the process of concept generation can be regarded as a solution for a state-place composed of multi-concepts. In this paper, genetic algorithm is utilized as a feasible tool to solve the problem of combinatorial optimization in concept generation, in which the encoding method of morphology matrix based on function analysis is applied, and a sequence of optimal concepts are generated through the search and iterative process which is controlled by genetic operators, including selection, crossover, mutation, and reproduction in GA. Several crucial problems on GA are discussed in this paper, such as the calculation of fitness value and the criteria for heredity termination, which have a heavy effect on selection of better concepts. The feasibility and intellectualization of the proposed approach are demonstrated with an engineering case. In this work concept generation is implemented using GA, which can facilitate not only generating several better concepts, but also selecting the best concept. Thus optimal concepts can be conveniently developed and design efficiency can be greatly improved.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.1-7
• /
• 2006

The whole objective of two papers in series was to develop the framework of an information management system (IMS) for soil-contaminated sites. In this work, we investigated current status of information management in our country and the IMSs of developed countries such as USA, Germany, Netherlands, and Japan. Through the investigation, we made four suggestions which could be taken into account for developing the IMS's framework. Firstly, we need to append the amendments on definition of information management and opening to the public to the Soil Environment Conservation Law. Secondly, detailed guidelines for each cleanup phase need to be developed. Thirdly, in order to increase the access of the public into the IMS, we need to provide electronic data files (e.g., PDF files) for them. Finally, a sole institution need to be chosen to control efficiently the IMS. In the subsequent paper, we will develop the framework of the IMS, based on the results of this work.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.183-183
• /
• 2011

Multiferroic materials have been widely studied in recent years, because of their abundant physics and potential applications in the sensors, data storage, and spintronics. $BiFeO_3$ is one of the well-known single-phase multiferroic materials with $ABO_3$ structure and G-type antiferromagnetic behavior below the Neel temperature $T_N$ ~ 643 K, but the ferroelectric behavior below the Curie temperature $T_c$~1,103 K. In this study, the $BiFe_{1-x}Ni_xO_3$ (x=0 and 0.05) bulk ceramics were prepared by solid-state reaction and rapid sintering with high-purity $Bi_2O_32$, $Fe_3O_4$ and NiO powders. The powders of stoichiometric proportions were mixed, as in the previous investigations, and calcined at 450$^{\circ}C$ for $BiFe_{1-x}Ni_xO_3$ for 24 h. The obtained powders were grinded, and pressed into 5-mm-thick disks of 1/2-inch diameter. The disks were directly put into the oven, which has been heated up to 800$^{\circ}C$ and sintered in air for 20 min. The sintered disks were taken out from the oven and cooled to room temperature within several min. The phase of samples was checked at room temperature by powder x-ray diffraction using a Rigaku Miniflex diffractometer with Cu K${\alpha}$ radiation. The Raman measurements were carried out by employing a hand-made Raman spectrometer with 514.5-nm-excitation $Ar^+$ laser source under air ambient condition on a focused area of 1-${\mu}m$ diameter. The field-dependent magnetization measurements were performed with a superconducting quantum-interference-device magnetometer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.470-470
• /
• 2012

Organic thin film transistors (OTFTs) backplane constitute the active elements in new generations of plastic electronic devices for flexible display. The overall OTFTs performance is largely depended on the properties and quality of each layers of device material. In solution based process of organic semiconductors (OSCs), the interface state is most impediments to preferable performance. Generally, a threshold voltage (Vth) shift is usually exhibited when organic gate insulators (OGIs) are exposed in an ambient air condition. This phenomenon was caused by the absorbed polar components (i.e. oxygen and moisture) on the interface between OGIs and Soluble OSCs during the jetting process. For eliminating the polar component at the interface of OGI, the role of high vacuum seasoning on an OGI for all solution processable OTFTs were studied. Poly 4-vinly phenols (PVPs) were the material chosen as the organic gate dielectric, with a weakness in ambient air. The high vacuum seasoning of PVP's surface showed improved performance from non-seasoning TFT; a $V_{th}$, a ${\mu}_{fe}$ and a interface charge trap density from -8V, $0.018cm^2V^{-1}s^{-1}$, $1.12{\times}10^{-12}(cm^2eV)^{-1}$ to -4.02 V, $0.021cm^2V^{-1}s^{-1}$, $6.62{\times}10^{-11}(cm^2eV)^{-1}$. These results of OTFT device show that polar components were well eliminated by the high vacuum seasoning processes.

• Journal of Engineering Education Research
• /
• v.10 no.1
• /
• pp.97-108
• /
• 2007

Undergraduate thesis contains overall results that students has acquired to express their ability during four university years. Undergraduate thesis includes an ability to apply knowledge of engineering, communicate engineering logic and thinking effectively, and use the techniques, skills for engineering practice. In terms of an assessment tool for program outcomes, undergraduate thesis provides the results of the student with authentic, reflective, interactive and individuals features. Also undergraduate thesis provides an opportunity of improvement about curriculum and engineering program. To apply the excellency of undergraduate thesis, the principle of undergraduate thesis should be understood well and reflected the real state of engineering education. The basic concept of undergraduate thesis as a assessment tool of engineering program outcomes has been introduced. The rubrics for measuring of a specific outcome was also suggested.

• Journal of Engineering Education Research
• /
• v.19 no.5
• /
• pp.13-24
• /
• 2016

The purpose of this research is to examine the characteristics of team interaction according to the creativity of team members. Research subjects to achieve this purpose included 28 students who are in engineering education in the College of Education at A University in Daejeon and have taken robot-related courses. Through first and second MBTI, and TTCT tests, the final homogeneous and heterogeneous teams were formed, and an experimental study was conducted by developing team design activity assignment. The major research results were as follows. In terms of a comprehensive view on interaction frequency, both homogeneous team and heterogeneous team suggested had the highest frequency in suggesting opinions. However, each of the team members in the homogeneous team had different communication frequency among each other while each team member in the heterogeneous team had almost similar frequency. A microscopic analysis of the communication process of homogeneous team showed that the team members' roles were divided among each other in communication. Next, according to the microscopic analysis of the heterogeneous team's communication process, the team members exchanged opinions in the beginning, talked to themselves in words that were hard to understand the meanings, and they stopped having conversations in the end. Due to such decrease in communication, two team members could not solve the confusing state of being unable to understand each other's opinions and failed to complete their assignments. The microscopic analysis demonstrated that the homogeneous team had a smooth interaction, because when one team member suggested an opinion during a conversation, other team members agreed with it through a discussion. However, the members in the heterogeneous team experienced confusion as they could not understand each other's conversation and could not overcome this problem, leading to lack of conversations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5459-5473
• /
• 2017

Recently, a tracking algorithm called the spatial-temporal context model has been proposed to locate a target by using the contextual information around the target. This model has achieved excellent results when the target undergoes slight occlusion and appearance changes. However, the target location in the current frame is based on the location in the previous frame, which will lead to failure in the presence of fast motion because of the lack of a prediction mechanism. In addition, the spatial context model is updated frame by frame, which will undoubtedly result in drift once the target is occluded continuously. This paper proposes two improvements to solve the above two problems: First, four possible positions of the target in the current frame are predicted based on the displacement between the previous two frames, and then, we calculate four confidence maps at these four positions; the target position is located at the position that corresponds to the maximum value. Second, we propose a target reliability criterion and design an adaptive threshold to regulate the updating speed of the model. Specifically, we stop updating the model when the reliability is lower than the threshold. Experimental results show that the proposed algorithm achieves better tracking results than traditional STC and other algorithms.

• Korean Journal of Construction Engineering and Management
• /
• v.2 no.1 s.5
• /
• pp.88-97
• /
• 2001

The Internet, the main issue of a new millennium, is being researched vitally for the progress of the construction industry, and the construction industry is considered to be led into a high-value added state-of-arts technology industry through CALS. Even if many construction companies gradually widen the use of the Internet for various purposes such as an electronic bidding system and an e-commerce system, the companies are still demanded to use the Internet more broadly and practically. Hence, the need for a tool for fast decision making and an effective construction management has risen. The PRIMA system has been developed specifically focused on meeting with those recent changes of the construction industry. This system is composed of three parts. Those are Just In Time(JIT) management, integrated application of man power${\cdot}$safety${\cdot}$work management and decision making process based on real-time information in the Internet. The usefulness of the PRIMA system has already been proved in a super-scale construction project. As the Internet environment get improved the use of the tool will be spread out gradually for many construction projects, regardless their size and location.