• 센서학회지
• /
• 제18권3호
• /
• pp.197-201
• /
• 2009

This paper studies on the noncontact displacement sensor system to detect the displacement of the cylinder rod. For an inexpensive and a simple process, magnetic scales are printed on the cylinder rod, and magnetized by the specially designed magnetizer that has an yoke through the alternation of N and S pole. Noncontact displacement sensor system consists of cylinder with magnetic scales, Hall sensor, linear guide, controller and display. The system can detect the displacement of moving cylinder with 5 cm/sec in the case of 1 mm magnetic scale. It shows a possibility of position detection of hydraulic cylinder and air cylinder.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.857-872
• /
• 2014

Recent researches reveal that great benefit can be achieved for data gathering in wireless sensor networks (WSNs) by employing mobile data collectors. In order to balance the energy consumption at sensor nodes and prolong the network lifetime, a multi-track large-scale mobile data collection mechanism (MTDCM) is proposed in this paper. MTDCM is composed of two phases: the Energy-balance Phase and the Data Collection Phase. In this mechanism, the energy-balance trajectories, the sleep-wakeup strategy and the data collection algorithm are determined. Theoretical analysis and performance simulations indicate that MTDCM is an energy efficient mechanism. It has prominent features on balancing the energy consumption and prolonging the network lifetime.

• 제어로봇시스템학회논문지
• /
• 제16권6호
• /
• pp.524-531
• /
• 2010

The automobile networks consist of the communication bus systems which become independent and heterogeneous each other. Most often, the CAN buses are implemented in a car in order to connect all the electronic control units in various ways. Thus, some gateways are necessary for exchanging the useful information between electronic control units on the buses. The automobile body networks group is divided into two kinds on a large scale, namely the low-speed bus and the high-speed bus. To interchange messages between the two, a CAN signal gateway is designed and implemented in a miniature scale. A network analyzer (called "Vehicle spy") and an oscilloscope monitor network situation to confirm the due operation of CAN signal gateway. The efficiency of the designed gateway is evaluated. The more message thread increased, the more efficiency decreased.

• Journal of International Society for Simulation Surgery
• /
• 제2권2호
• /
• pp.64-66
• /
• 2015

Purpose : In this paper we proposed cascade feature filter and projection method for rapid human face recognition for the large-scale high-dimensional face database. Materials and Methods : The relevant features are selected from the large feature set using Fast Correlation-Based Filter method. After feature selection, project them into discriminant using Principal Component Analysis or Linear Discriminant Analysis. Their cascade method reduces the time-complexity without significant degradation of the performance. Results : In our experiments, the ORL database and the extended Yale face database b were used for evaluation. On the ORL database, the processing time was approximately 30-times faster than typical approach with recognition rate 94.22% and on the extended Yale face database b, the processing time was approximately 300-times faster than typical approach with recognition rate 98.74 %. Conclusion : The recognition rate and time-complexity of the proposed method is suitable for real-time face recognition system on the large-scale high-dimensional face database.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.101-104
• /
• 2007

Efficient Query processing and optimization are critical for reducing network traffic and decreasing latency of query when accessing and manipulating sensor data of large-scale sensor networks. Currently it has been studied in sensor database projects. These works have mainly focused on in-network query processing for sensor networks and assumes homogeneous sensor networks, where each sensor network has same hardware and software configuration. In this paper, we present a framework for efficient query processing over heterogeneous sensor networks. Our proposed framework introduces query processing paradigm considering two heterogeneous characteristics of sensor networks: (1) data dissemination approach such as push, pull, and hybrid; (2) query processing capability of sensor networks if they may support in-network aggregation, spatial, periodic and conditional operators. Additionally, we propose multi-query optimization strategies supporting cross-translation between data acquisition query and data stream query to minimize total cost of multiple queries. It has been implemented in WSN middleware, COSMOS, developed by ETRI.

• Transactions on Electrical and Electronic Materials
• /
• 제3권1호
• /
• pp.23-29
• /
• 2002

The electronic properties of Carbon Nanotube(CNT) are currently the focus of considerable interest. In this paper, the electronic properties of finite length effect in CNT for the carbon nano-scale device is presented. To Calculate the electronic properties of CNT, Empirical potential method (the extended Brenner potential for C-Si-H) for carbon and Tight Binding molecular dynamic (TBMD) simulation are used. As a result of study, we have known that the value of the band gap decreases with increasing the length of the tube. The energy band gap of (6,6) armchair CNT have the ranges between 0.3 eV and 2.5 eV. Also, our results are in agreements with the result of the other computational techniques.

• 무역상무연구
• /
• 제13권
• /
• pp.1013-1032
• /
• 2000

At present, the scale of Electronic Commerce through internet has been rapidly increasing due to the development of information & communication technology, and aggregated to 2.4 billion dollar in America last year (1998). The market scale of worldwide electronic commerce is also presumed to be about 130 billion dollar in 2000, and to occupy more than 20% of the whole world trade in world 2020. Since the right of trademark, despite of being effective only in registered nations on the principle of territorialism, is unified on the cyber space of internet without domestic barrier or local limitation which make it easier to conduct the distribution of information rapidly through the address-internet domain name, those are very important that the systematic dispute-solving plan on problems such as decision of its Act and international jurisdiction to be established, in an effort to prevent the newly emerging dispute instances such as trademark infringement and improper competitiveness. In addition, it is natural that on the threshold of the electronic commerce age which formed with an unified area without the worldwide specific regulation, each country including us makes haste with the enactment of "electronic commerce Act" aiming at coming into force in 1999, in keeping with getting through "non-tariff law on electronic commerce" by U. S. parliament on May, 1998. In view of the properties of electronic commerce transactions through internet, there are the large curtailment of distributive channel, surmounting of restrictions on transaction area, space and time and the easy feedback with consumer and the cheap-required capital, from which the problems may arise - registration of trademark, the trademark infringement of domain name and the protection of prestigious trademark. Therefore, it is necessary to take the counter-measure, with a view of reviewing the infringement of trademark and domain name and the instances of each national precedent and to preventing the disputes. The improvement of the persistent system should be needed to propel the harmonious protection of those holding trademark right's credit and demanders' expectant profit by way of the righteous use of trademark.

• Current Optics and Photonics
• /
• 제6권4호
• /
• pp.359-366
• /
• 2022

In this paper, we present a new design for angle-sensitive pixels (ASPs). The proposed ASPs take advantage of subwavelength compound gratings to capture the light angle, which enables pixel size to reach the wavelength scale of 0.7 ㎛ × 0.7 ㎛. The subwavelength compound gratings are implemented by the wires of the readout circuit inherent to the standard complementary metal-oxide-semiconductor manufacturing process, thus avoiding additional off-chip optics or post-processing. This technique allows the use of two pixels for horizontal or vertical angle detection, and can determine the light's angle in the range from -45° to +45°. The proposed sensor enables surface-profile reconstruction of microscale samples using a lensless imaging system.

• 한국언어정보학회지:언어와정보
• /
• 제15권2호
• /
• pp.23-45
• /
• 2011

This paper proposes a statistical-based linguistic methodology for automatic mapping between large-scale heterogeneous languages resources for NLP applications in general. As a particular case, it treats automatic mapping between two large-scale heterogeneous Korean language resources: Sejong Semantic Classes (SJSC) in the Sejong Electronic Dictionary (SJD) and nouns in KorLex. KorLex is a large-scale Korean WordNet, but it lacks syntactic information. SJD contains refined semantic-syntactic information, with semantic labels depending on SJSC, but the list of its entry words is much smaller than that of KorLex. The goal of our study is to build a rich language resource by integrating useful information within SJD into KorLex. In this paper, we use both linguistic and statistical methods for constructing an automatic mapping methodology. The linguistic aspect of the methodology focuses on the following three linguistic clues: monosemy/polysemy of word forms, instances (example words), and semantically related words. The statistical aspect of the methodology uses the three statistical formulae ${\chi}^2$, Mutual Information and Information Gain to obtain candidate synsets. Compared with the performance of manual mapping, the automatic mapping based on our proposed statistical linguistic methods shows good performance rates in terms of correctness, specifically giving recall 0.838, precision 0.718, and F1 0.774.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.68-72
• /
• 2008

AlGaInP high-brightness LEDs(HB-LEDs) have gained importance a variety of application operating in the red, orange, yellow and yellow-green wavelength. The light generated from inside LED chips should be emitted to the air through the surfaces of the chips. However, because of the differences between the semiconductor and air or epoxy's refractive index, some of the light was blocked so that caused lowering external quantum efficiency. In this study, nano-scale roughness on the top-GaP layer of AlGaInP epitaxial wafer was fabricated to improve' the brightness of AlGaInP LEDs. Nano-scale roughness was made by ICP dry etcher. Our AlGaInP LEDs with nano-scale roughness has higher brightness (about 28.5 %) than standard AlGaInP LEDs.