• 한국산업융합학회 논문집
• /
• 제13권2호
• /
• pp.107-112
• /
• 2010

The automation and Cell-Line of manufacturing process are going to be new trend in the industry spot. But workers bodily burden by manual labour is still doing repeatedly at many processes. It is appearing to workers bodily burden (Shoulder, waist, hand, wrist, leg) with repeating works at assembly line which is from the static working space. The analysis with 6 Sigma Tool at specific standard assembly line improve the point at issue for unsuitable items and analyzed objects. Physical pain of worker is solved by the improvement action for the factor of 7 items with the result of analysis. It was known to be improved by solving of workers burden related to the change of 6 Sigma level from 2.16 to 4.1 at assembly line.

• 한국위험물학회지
• /
• 제6권2호
• /
• pp.47-54
• /
• 2018

Mixed acid is very reactive and highly corrosive. it has been causing many accidents in a electronic industry, a steel industry, and a chemical industry. Therefore, it is required that the high safety level for the acid storage facilities. In this study, we investigated the accident causes for resent leak accidents with Root Cause Analysis (RCA). The root causes analysed by RCA were categorized as nine divisions by the their characteristics. Furthermore, each nine divisions causes was applied to the PDCA model which are using at OHSAS 18001. It is suggested that the nine division with the root causes can be the essential items for the development of the safety management manual. It is helpful to the safety improvement of the acid storage facility.

• Asian Journal of Innovation and Policy
• /
• 제7권3호
• /
• pp.581-605
• /
• 2018

In the soft drink industry, especially small and medium enterprises in Japan, there is a possibility of conversion from a labor-intensive industry to a capital-intensive. The demand for soft drinks may not be satisfied in the summer because the supply is too low to meet the demand. To address this situation, this paper proposes optimal investment that integrates demand uncertainty, based on real options approach (ROA) and seasonal autoregressive integrated moving average. Two alternative options are compared and evaluated. One is the Bermudan option: to employ additional workers to elevate efficiency in summer and laying off in winter, this attitude is repeated each year. The other is the American option: to replace equipment to increase machine ability throughout the year. Results in ROA show that the highest improvement is gained if the two options are in a symbiotic relationship. Soft drink producers should search for replacing equipment, using the employees repeatedly. A temporary decision is not equal to an infinite decision.

• 한국가금학회지
• /
• 제37권3호
• /
• pp.215-219
• /
• 2010

The applicability of electronic nose was tested to detect lipid peroxidation in chickens and to measure antioxidant effect of astaxanthin in chicken carcasses. Two sources of astaxanthin were fed to 62-wk-old spent laying hens to improve meat quality: natural astaxanthin (NA) from the red yeast, Phaffia rhodozyma, and synthetic astaxanthin (SA) from chemical synthesis. One hundred forty four ISA Brown laying hens were used in a 6-wk feeding trial. Three treatments consisted of the basal diet (control), SA (100 mg astaxanthin/kg basal diet) and NA (50 mg astaxanthin/kg basal diet). The astaxanthin levels of SA and NA were set to give a similar degree of skin pigmentation. After 6-wk feeding of astaxanthin, the skins from NA and SA were discriminated from the control by electronic nose. However, electronic nose failed to distinguish between SA and NA skins after 6-wk feeding. The astaxanthin level differences between skins of SA and NA were not remarkable during the 6-wk trial. The lipid peroxide formation in skin was significantly decreased by SA but not by NA. The antioxidation effect of SA was detected by electronic nose because SA skin was discriminated from others. NA was a better pigmentation agent than SA, but the reverse was true in antioxidation. Electronic nose is applicable for detecting astaxanthin in chicken, and meat off-flavor caused by lipid peroxidation during storage.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.931-943
• /
• 2018

Wireless power transfer (WPT) technology has been the focus of a lot of research due to its safety and convenience. The Z-source inverter (ZSI) was introduced into WPT systems to realize improved system performance. The ZSI regulates the dc-rail voltage in WPT systems without front-end converters and makes the inverter bridge immune to shoot-through states. However, when the WPT system is combined with a ZSI, the system parameters must be configured to prevent the ZSI from entering an "accidental shoot-through" (AST) state. This state can increase the THD and decrease system power and efficiency. This paper presents a mathematical analysis for the characteristics of a WPT system and a ZSI while addressing the causes of the AST state. To deal with this issue, the impact of the system parameters on the output are analyzed under two control algorithms and the primary compensation capacitance range is derived in detail. To validate the analysis, both simulations and experiments are carried out and the obtained results are presented.

• 디지털융복합연구
• /
• 제19권5호
• /
• pp.229-239
• /
• 2021

본 연구를 위하여 정부의 금융관련 부서의 발표자료와 각 금융기관 및 전자금융 관련 기관의 자료를 광범위하게 분석한 결과, 우리나라의 전자금융 환경에 있어 첫째) 비대면 금융의 확대, 둘째) 금융권의 원격근무, 셋째) 공인인증의 폐지, 넷째) 고도화되는 보이스피싱, 다섯째) 금융산업의 개방과 형태의 다양화, 여섯째) '지갑 없는 사회'의 도래 등의 실제적 변화가 나타나고 있다. 하지만 이상의 문제 외에도 예를 들어, 4차 산업혁명으로 촉발된 전 세계적 변화는 금융보안 분야에도 전파되어, 인공지능 기술/딥러닝 기술/사용자 분석 기술/딥페이크(deepfake) 기술 등과 같은 문제는 특히 대응하기 어려운 위험요소이다. 전자금융은 사회적으로 점점 그 비중이 확대되고 있는 만큼, 전자금융과 그 환경의 문제 및 그로 인한 범죄와 범죄 수사의 분야까지도 꾸준하게 연구되어야 마땅하다.

• 한국전자통신학회논문지
• /
• 제17권6호
• /
• pp.1226-1274
• /
• 2022

본 논문에서는 산업 재해의 주요 원인인 추락 및 낙상 사고와 가스 누출에 중점을 둔 위험 상황 감지 안전모를 다루었다. 가속도 센서를 이용한 중력 가속도 측정을 통해 추락 상황 범위를 설정하였으며, 그 결과 80%의 추락 및 낙상 감지율을 확인할 수 있었다. 또한 가스 센서를 통해 위험 가스 농도를 측정하여 시리얼 모니터를 통해 188 이상의 디지털 값이 출력될 경우 가스 위험 상황으로 판단하였다, 앱 인벤터 프로그램을 기반으로 제작한 스마트폰 어플을 통해 추락 및 낙상 상황 경고 메시지와 가스 경고 메시지를 확인할 수 있도록 구현하였다.

• 한국건설관리학회논문집
• /
• 제6권1호
• /
• pp.99-108
• /
• 2005

건설분야 전자매뉴얼은 기존에 서술적 문서형태로 작성되어온 시공법, 유지관리절차 등에 관련된 시방규정, 지침서들이 시각화를 위한 멀티 미디어 기능과 통합연계정보 제공기능을 갖는 전자적 형태로 구성된 것을 의미한다. 이러한 전자적 개념의 건설전자매뉴얼은 지침 규정의 전자화는 물론이고, 공사관리자의 이해도 증진을 위해 해당 규정에 관련된 3D동영상 화면과 가상현실, 시공이력사진 정보들을 연계해서 제공해 주는 종합 정보시스템 개념을 갖고 있다. 현재 시방정보, 관련법규 등의 건설분야 각종 지침들은 전자화를 위한 표준적 인 규칙 이 없이 일반적 인 문서형 태로 작성되고 있으므로, 관련정보의 체계적인 축적 및 공유가 어렵고 효과적 인 시설물의 시공 및 유지관리에 장애요인이 되고 있다. 본 연구에서는 기존 건설분야 정보화 체계와 비교하여 전자매뉴얼의 필요성과 타 분야 전자매뉴얼대비 건설전자매뉴얼의 특성을 분석하여 건설분야에 적합한 구성전략을 제시함으로써, 건설분야 전자매뉴얼의 활용도를 인식시키는데 연구목적이 있다. 이를 위하여 본 연구에서는 유지관리업무 전자매뉴얼 시안을 포함하는 시설물 재해관리용 전자매뉴얼의 적용성을 가상적으로 구성하여 검증하고 있다.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1550-1559
• /
• 2013

Light emitting diode(LED) lighting has been applied various industry fields because of its high efficiency, low power consumption, long life time, and environment friendly characteristics. Generally, LED lighting needs a driver to maintain constant current. Most popular driver is the switching converter. In the converter, there are several electrolytic capacitors. However the lifespan of the electrolytic capacitor is much shorter than LED. Therefore the lifespan of LED lighting with electrolytic capacitor is decreased. Also, LED lighting needs dimming control because of various needs and energy saving. This paper presents the dimmable single-stage PFC DCM flyback converter without electrolytic capacitor and parallel LC resonant filter for reducing 120[Hz] ripple on the output. The type 2 controller is used to maintain constant current and the analog dimming control is used. The proposed converter is verified through simulation and experimental works.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.53-57
• /
• 2009

The h-BN powder was synthesized by amorphous $B_2O_3$ and activated carbon at $1550^{\circ}C$ in nitrogen atmosphere, whose properties were examined according to $MgB_6$ addition. Amount of $MgB_6$ addition was varied in the range of $0{\sim}$10\;wt% of the initial mixture. It was observed that $MgB_6$ addition led to an increase in the amount and the grain size of h-BN and decrease in the amount of $B_4C$ forming. When $MgB_6$ added 5 wt%, the amount and crystallinity of h-BN increased as the holding time at the synthesis temperature was prolonged. It was also confirmed that the regularity of three-dimensional ordering of h-BN increases.