• Corrosion Science and Technology
• /
• 제4권6호
• /
• pp.226-230
• /
• 2005

Si incorporated diamond-like carbon (Si-DLC) films ranging from 0 to 2 at.% contents were deposited on STS 316L substrates for orthopedic implants by means of r.f. plasma-assisted chemical vapor deposition (r.f. PACVD) technique, using mixtures of benzene ($C_6H_6$) and silane ($SiH_4$) as the precursor gases. This study provides the reliable and quantitative data for assessment of the effect of Si incorporation on corrosion property in the simulated body fluid environment through the electrochemical test. It was found that corrosion to resistance of Si-DLC coatings with increasing Si content are improved owing to high $sp^3$ bonding.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1564-1566
• /
• 2004

BCP의 이온화에너지 (Ionization Potential; IP)는 5.72ev와 전자친화도 (Electron Affinity; EA)는 2.85ev이며, PEDOT의 IP=5.74ev와 EA=3.3sev이고, TAZ의 IP=6.45ev와 EA=2.77ev, TPD는 IP=5.75ev와 EA=2.S8eV를 나타내었다. 그리고 BCP와 TAZ는 산화전위의 시작점과 증가곡선의 전위 변곡점과의 차이(정공층 갭)와 환원전위의 시작점과 변곡점의 차이(전자층 갭)가 서로 비슷하였으며, PEDOT과 TPD의 경우 정공층의 갭이 전자층의 갭보다 크게 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.111-111
• /
• 2012

In this talk, we represent a novel approach to investigating intra-nanorod surface plasmon coupling with control over block compositions. The multi-component rod-like nanostructures, which consist of optically active components (Au and Ag) and optically less active component (for example, Ni) in UV-vis-NIR spectral window, showed interesting optical response depending on each block length and the total length of the structure. By controlling the composition and relative lengths of the blocks that comprise these structures, we can tailor the overall optical properties. Depending on the relative fraction of Au and Ag blocks, the intensity of the transverse modes varied without noticeable peak shifts. However, the strong intraparticle surface plasmon coupling resulted in the collective appearance of longitudinal LSP modes, including higher-order modes. The experimental observations were confirmed by theoretical calculation, using a discrete dipole approximation method. In addition, we will briefly discuss how single nanorod solar cells can be synthesized by using by using electrochemical deposition and AAO hard templates.

• Corrosion Science and Technology
• /
• 제12권5호
• /
• pp.253-258
• /
• 2013

Effects of copper hydroxide(II) on the curing and the corrosion resistance of electrocoating were investigated by MEK rubbing test, electrochemical impedance spectroscopy (EIS) and Thermo-gravimetric analysis (TGA). Curing performance of electrocoating was lowered with increasing the content of copper hydroxide(II) as evidenced by the MEK rub performance which decreased with increasing the content of copper hydroxide(II). This indicates copper hydroxide(II) affected the blocked isocyanate reaction in the coatings, by the decomposition of copper hydroxide(II) to CuO and $H_2O$ during reaction of isocyanate with nuclephiles. Corrosion resistance of coatings also decreased with the content of copper hydroxide. This reflects the higher barrier property in coatings with higher curing performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.187-188
• /
• 2008

In this paper, we have investigated water content of semiconductive shield materials for power cables, EEA(Ethylene Ethyl Acrylate) is used polymer matrix. And filler is used CNT(Carbon Nanotube) and CB(Carbon Black). EEA, CNT and CB is favor moisture. In case of EEA, it has polyolefin resin that strong polarity combination. To research water content, experimental method used KF(Karl Fischer). KF method is Electrochemical titration based on chemical reaction. As a result, specification by KEPCO(Korea Electric Power Corporation) is lower than 800ppm. CNT and CB ratio of 80 versus 20 is best specimen that had lowest moisture content. It seem likely to increase crosslinking rate, CNT between CB.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.206-212
• /
• 1998

The water permeation in protective coatings, which may greatly influence the corrosion protective property of these coatings, was studied using the electrochemical impedance spectroscopy technique. During the absorption of water in protective coatings immersed in electrolyte solution, the change of coating capacitance with concentration of electrolyte was determined from impedance measurements. When water absorption or desorption of coatings occured by exposing the coatings to electrolyte solutions of different concentration, increase in impedance caused by desorption of water was found to be higher in the case of thicker film. The amount of water absorbed in coatings changed with concentration of electrolyte. The water taken up in coatings from the solution of lower electrolyte concentration was deserted by contact with the solution of higher concentration. The uptake of water in protective coatings varied depending on the type of coating ingredient especially binder.

• 한국인쇄학회지
• /
• 제8권1호
• /
• pp.1-20
• /
• 1990

$\alpha$,$\beta$,$\varepsilon$ type copper phthalocy $\alpha$,$\beta$,$\varepsilon$ type copper phthalocyanine(CuPc) pigment was purified by a simple train sublimation technique. The layered photoconductor was made with $\varepsilon$ type CuPc as a carrier generation layer(CGL) and polyvinly carvazol(PVCz) as a carrier transport layer(CLT). A CGL of CuPc was electrochemical deposited on an Al substrate used as cathode in pigment dispersion solutions. a CTL of PVCz pwas spin coated on $\varepsilon$ type CuPc thin film by a spin coater. The effect of sonication time, electrophotographic property of the layered photoconductor were studied with surface coverage, surface potential and sensitivity.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.234-234
• /
• 2006

Novel molecular glassy POSS-based material having carbazole moiety as a photo- and electroactive group was synthesized, and its thermal, morphological, electrochemical, and optical properties were investigated. POSS having carbazole (POSS-Cz) was found to form easily amorphous glassy film by cooling the melt sample or by spin coasting onto glass substrate. POSS-Cz showed monomeric emission even in solid film, which suggests that carbazole moiety can be isolated even in solid state.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.552-558
• /
• 2000

LiMn2O4 thin fiolm cathodes for Li-ion secondary battery were fabricated by r.f. magnetron sputtering technique. As-deposited films were amorphous. A spinel structure could not be obtained LiMn2O4 films by in-situ thermal annealing. After post thermal annealing over $700^{\circ}C$ in oxygen atmosphere, LiMn2O4 films prepared above 100 W r.f. power could be crystallized into a spinel structure. The electrochemical property of the LiMn2O4 film cathodes was tested in a Li/1 M LiClO4 in PC/LiMn2O4 cell. From cyclic voltammetry at scan rate of 2mV/sec of 2.5~4.5V, LiMn2O4 electrode prepared by post annealing at 75$0^{\circ}C$ showed good initial capacity. LiMn2O4 electrode prepared by post annealing at 80$0^{\circ}C$ showed the best crycling performance.

• ETRI Journal
• /
• 제38권2호
• /
• pp.252-259
• /
• 2016

Di(1-aminopyrene)quinone (DAQ) as a quinone-containing conducting additive is synthesized from a solution reaction of 1-aminopyrene and hydroquinone. To utilize the conductive property of DAQ and its compatibility with activated carbon, a composite electrode for a supercapacitor is also prepared by blending activated carbon and DAQ (3:1 w/w), and its supercapacitive properties are characterized based on the cyclic voltammetry and galvanostatic charge/discharge. As a result, the composite electrode adopting DAQ exhibits superior electrochemical properties, such as a higher specific capacitance of up to $160F{\cdot}g^{-1}$ at $100mV{\cdot}s^{-1}$, an excellent high-rate capability of up to $1,000mV{\cdot}s^{-1}$, and a higher cycling stability with a capacitance retention ratio of 82% for the 1,000th cycle.