• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.69-74
• /
• 1999

Graphite and carbonaceous materials intercalate and deintercalate Li-ion reversibly into their layered structures. These materials show an excellent capacity for using a negative electrode in Li-ion batteries, because the electrochemical potential of Li-ion intercalated carbon is almost identical with that of lithium metal. Carbon used in this study was obtained by the pyrolysis of petroleum pitch, and heat-treated at the several temperatures between $700^{\circ}C$ and $1300^{\circ}C$. XRD analysis revealed that crystallization of carbon increased with increasing the heat treatment temperature. Charge/discharge properties were studied by a constant-current step at the rate of 0.1C, and the interfacial reaction between the electrolyte and the surface of carbon electrode was studied by cyclic voltammetry. Cell capacities were investigated in terms of the heat treatment temperature and the cycle number. Reversible capacity increased with the heat treatment temperature up to $1000^{\circ}C$, thereafter decreased continuously. Also, charge capacity decreased with the cycle number, while the reversibility improved with it.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.3
• /
• pp.235-240
• /
• 1999

Bioequivalence of two clarithromycin tablets, the $Klaricid^{TM}$ (Ciba-Geigy Korea Ltd., Seoul, Korea) and the LG clarithromycin (LG Chemical Co., Ltd., Seoul, Korea), was evaluated according to the Korean Guidelines for Bioequivalence Test (KGBT 1998). Sixteen normal male volunteers $(20{\sim}26\;years\;old)$ were randomly divided into two groups and a randomized $2{\times}2$ cross-over study was employed. After one tablet containing 250 mg of clarithromycin was orally administered, blood sample was taken at predetennined time intervals, and the concentrations of clarithromycin in serum were detennined using HPLC method with electrochemical detector. The pharmacokinetic parameters $(AUC_t,\;C_{max}\;and\; T_{max})$ were calculated and ANOVA was utilized for the statistical analysis of parameters. The results showed that the differences in $AUC_t$, $C_{max}$, and $T_{max}$ between two tablets based on $Klaricid^{TM}$ tablet were 4.06%,2.67% and -9.70%, respectively. The powers $(1-{\beta})$ for $AUC_t$, $C_{max}$ and $T_{max}$ were 83.53%, 92.34% and 96.64%, respectively. Detectable differences $({\Delta})$ and 90 % confidence intervals $(a=0.05) $were all less than ${\pm}20%$. All the parameters above met the criteria of KGBT 1998, indicating that LG clarithromycin tablet is bioequivalent to $Klaricid^{TM}$ tablet.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.2
• /
• pp.8-14
• /
• 2016

We compared the plausible reaction mechanism and quantitative efficiency of highly self-organized TiO₂ nanotube (ntTiO₂) film with TiO₂ powder. Film was fabricated by electrochemical potentiostatic anodization of titanium thin film in an ethylene-glycol electrolyte solution containing 0.3 wt% NH₄F and 2 vol% deionized water. Nanotubes with a pore size of 80-100 nm were formed by anodization at 60 V for 3 h. Humic acid (HA) was degraded through photocatalytic degradation using the ntTiO₂ film. Pseudo first-order rate constants for 0.3 g of ntTiO₂, 0.3 g TiO₂ powder, and 1 g TiO₂ powder were 0.081 min⁻¹, 0.003 min⁻¹, and 0.044 min⁻¹, respectively. HA adsorption on the ntTiO₂ film was minimal while adsorption on the TiO₂ powder was about 20% based on thermogravimetric analysis. Approximately five-fold more normalized OH radicals were generated by the ntTiO₂ film than the TiO₂ powder. These quantitative findings explain why ntTiO₂ film showed superior photocatalytic performance to TiO₂ powder.

• Korean Journal of Materials Research
• /
• v.10 no.10
• /
• pp.715-720
• /
• 2000

By the mechanical alloying method. Ni-WC composite materials were prepared to improve the deformation-resistance for creep and sintering of Ni-anode at the operating temperature of $650^{\circ}C$. Mechanically alloyed powder w was initially fabricated by ball milling for 80hr, and then amorphization was occurred by the destruction of ordered crystals based on XRD analysis. In order to investigate the electrochemical performance and sheet characteristics of Ni-WC anode, tape casting process was adopted. Finally, the obtained sheet thickness of Ni- we after sintering at $1180^{\circ}C$ for 60 minutes in $H_2$ atmosphere was O.9mm and the average pore size was $3~5{\mu\textrm{m}}$ with porosities of 55%. The second phase was not observed in Ni- W matrix while W particles were finely and uniformly distributed in Ni matrix. This fine and uniform distributed W particles in Ni matrix are expected to enhance the mechanical properties of Ni anode through the dispersion and solid solution hardening mechanisms.

• Korean Journal of Materials Research
• /
• v.24 no.5
• /
• pp.243-248
• /
• 2014

Silicon-carbon composite was prepared by the magnesiothermic reduction of mesoporous silica and subsequent impregnation with a carbon precursor. This was applied for use as an anode material for high-performance lithium-ion batteries. Well-ordered mesoporous silica(SBA-15) was employed as a starting material for the mesoporous silicon, and sucrose was used as a carbon source. It was found that complete removal of by-products ($Mg_2Si$ and $Mg_2SiO_4$) formed by side reactions of silica and magnesium during the magnesiothermic reduction, was a crucial factor for successful formation of mesoporous silicon. Successful formation of the silicon-carbon composite was well confirmed by appropriate characterization tools (e.g., $N_2$ adsorption-desorption, small-angle X-ray scattering, X-ray diffraction, and thermogravimetric analyses). A lithium-ion battery was fabricated using the prepared silicon-carbon composite as the anode, and lithium foil as the counter-electrode. Electrochemical analysis revealed that the silicon-carbon composite showed better cycling stability than graphite, when used as the anode in the lithium-ion battery. This improvement could be due to the fact that carbon efficiently suppressed the change in volume of the silicon material caused by the charge-discharge cycle. This indicates that silicon-carbon composite, prepared via the magnesiothermic reduction and impregnation methods, could be an efficient anode material for lithium ion batteries.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.561-566
• /
• 2012

PtRuW/C catalysts were prepared with the different molar ratios of Pt : Ru : W and their compositions were analyzed by energy dispersive X-ray (EDX). The uniform distribution of particles was observed using transmission electron microscopy (TEM). An average crystalline size of 3.5~5.5 nm was calculated based on x-ray diffraction (XRD) data. The electrochemical properties such as electrochemically active surface areas, current densities, specific activities and poisoning rates, were analyzed via CO stripping, linear sweep voltammetry and chronoamperometry. From the analysis, we observed that ternary alloy catalysts, except $PtRu_2W_2/C$, have higher current densities, specific activities and stabilities than those of commercial binary catalysts. Among all in-house catalysts, Pt5Ru4W/C showed the highest specific activity of $121.05mA{\cdot}m^{-2}$ and the lowest poisoning rate of $0.01%{\cdot}s^{-1}$.

• Journal of Food Hygiene and Safety
• /
• v.32 no.6
• /
• pp.447-454
• /
• 2017

A new amperometric biosensor has been developed for the detection of hydrogen peroxide ($H_2O_2$). The sensor was fabricated through the one-step deposition of a biocomposite layer onto a glassy carbon electrode at neutral pH. The biocomposite, as a $H_2O_2$ sensing element, was prepared by the electrochemical deposition of a homogeneous mixture of graphene oxide, aniline, and horseradish peroxidase. The experimental results clearly demonstrated of that the sensor possessed high electrocatalytic activity and responded to $H_2O_2$ with a stable and rapid manners. Scanning electron microscopy, cyclic voltammetry, and amperometry were performed to optimize the characteristics of the sensor and to evaluate its sensing chemistry. The sensor exhibited a linear response to $H_2O_2$ in the range of 10 to $500{\mu}M$ concentrations, and its detection limit was calculated to be $1.3{\mu}M$. The proposed sensing-chemistry strategy and the sensor format were simple, cost-effective, and feasible for analysis of "food-grade $H_2O_2$" in food samples.

• Resources Recycling
• /
• v.26 no.4
• /
• pp.34-41
• /
• 2017

The effect of Mn(II) concentration on the anodic reactions occurring on a Pb-Ag electrode in sulfuric acid solutions has been studied by potentiostatic oxidation in the potential range of 1.8 to 2.0 V. High oxidation potentials and low initial concentrations of Mn(II) resulted in higher concentrations of soluble Mn(III) ions which were obtained from spectrophotometric analysis of the solution after oxidation. $MnO_2$ was deposited on the electrode by electrochemical oxidation of Mn(II) at 1.8 and 1.9 V, while it was formed by disproportionation of Mn(III) at 2.0 V. No $PbO_2$ was formed in the presence of Mn(II) during potentiostatic oxidation treatment for two hours at 1.8 V. Chemical reduction of $PbO_2$ with Mn(II) led to a decrease in the amount of $PbO_2$ as Mn(II) concentration increased at 1.9 and 2.0 V.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.6
• /
• pp.521-527
• /
• 1990

The binding characteristics and analytical applications of anilinium ion complexes with 18-crown-6 were studied by polarography and NMR. First, the electrochemical reduction of the 10 species of mono and dimethylsubstituted anilinium ion complexes with 18-crown-6 as host in methanol are examined. The addition of 18-crown-6 to anilinium guest solution the polarographic waves remain well defined but shifted toward more negative potentials, indicating the complex formation. The values of formation constants, log Κ for 10 species of methylsubstituted anilinium ion complexes with 18-crown-6 varies from 2.7 to 4.8 in methanol at $25^{\circ}C$. The stability order of complexes for 18-crown-6 is anilinilum > 4-methyl > 3,4-dimethyl > 3-methyl > 3,5-dimethyl > 2,4-dimethyl > 2,5-dimethyl > 2,3-dimethyl > 2-methyl > 2,6-dimethylanilinium ion. The steric hindrance shows significant effect. Second, Proton NMR was used to elucidate their interaction characteristics. From the results of so called NMR titration techniques, the behaviors of binding sites on complexation, and the stoichiometry and stability order of complex were obtained. And the later results show the satisfactory agreement with the quantitative values obtained by polarography. Finally, the individual determinations of anilinium ion mixtures were also accomplished by addition of 18-crown-6. In some mixtures of methyl or dimethylanilinium ions the reduction peaks of differential pulse method appeared into one unresolved wave attributed to the small difference of half-wave potential, ${\Delta}E_{1/2}$. In the presence of 18-crown-6, the polarographic waves were resolved into individual maxima because of the shift toward more negative direction by the difference of selectivity of anilinium ions with 18-crown-6. It may be concluded that quantitative analysis of methylanilinium ion mixture make possible because the half-wave potential shift by the selectivity difference due to the steric hindrance between methyl group and 18-crown-6 on complexation.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.661-666
• /
• 1998

Active reaction sites and electrochemical O2 reduction kinetics on La_{1-x}Sr_xMnO_{3+{\delta}} (x=0.1-0.4)/YSZ (yttria-stabilized zirconia) electrodes are investigated in the temperature range of 700-900 ℃ at $Po_2=10^{-3}$-0.21 atm. Results of the steady-state polarization measurements, which are formulated into the Butler-Volmer formalism to extract transfer coefficient values, lead us to conclude that the two-electron charge transfer step to atomically adsorbed oxygen is rate-limiting. The same conclusion is drawn from the $Po_2$-dependent ac impedance measurements, where the exponent m in the relationship of $I_o$ (exchange current density) ∝ $P_{o_{2}}^m$ is analyzed. Chemical analysis is performed on the quenched Mn perovskites to estimate their oxygen stoichiometry factors (δ) at the operating temperature (700-900 ℃). Here, the observed δ turns out to become smaller as both the Sr-doping contents (x) and the measured temperature increase. A comparison between the 8 values and cathodic activity of Mn perovskites reveals that the cathodic transfer coefficients $({\alpha}_c)$ for oxygen reduction reaction are inversely proportional to δ whereas the anodic ones $({\alpha}_a)$ show the opposite trend, reflecting that the surface oxygen vacancies on Mn perovskites actively participate in the $O_2$ reduction reaction. Among the samples of x= 0.1-0.4, the manganite with x=0.4 exhibits the smallest 8 value (even negative), and consistently this electrode shows the highest ${\alpha}_c$ and the best cathodic activity for the oxygen reduction reaction.