• Rapid Communication in Photoscience
• /
• v.3 no.4
• /
• pp.61-63
• /
• 2014

3,7-bis(4-(diphenylamino)phenyl)-5-phenyl-5H-benzo[b]phosphinedole 5-sulfide (DBPPS-TPA) and 3,7-bis(4-(diphenylamino)phenyl)-5-phenyl-5H-benzo[b]phosphinedole 5-selenide (DBPPSe-TPA) are newly synthesized D-A-D type molecules based on dibenzophospholes and their physic-chemical properties are studied in comparison with a P=O type compouond, 3,7-bis(4-(diphenylamino)-5-phenyl-5H-benzo[b]phosphinedole 5-oxide (DBPPO-TPA). Fluorescence emission and electrochemical redox properties of these compounds are investigated regarding results of density functional theory (DFT) calculations, X-ray crystallographic structures and UV-vis absorption spectra. These results exhibit systematic variation in optical properties of these compounds having P=O, P=S, and P=Se units. LUMO energy level is systematically modulated with different chalcogenide atoms.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1647-1653
• /
• 2014

9,10-Bis(bromomethyl)phenanthrene reacted with fullerenes via a Diels-Alder reaction to give phenanthrene-substituted fullerene mono-adducts (PCMA) and bis-adducts (PCBA) as electron acceptors for organic photovoltaic cells (OPVs). The syntheses of the fullerene derivatives were confirmed by $^1H$ $^{13}C$ NMR spectroscopy and MALDI-TOF mass spectrometry. PCMA and PCBA showed better light absorption in the UV-visible region than $PC_{61}BM$. Their electrochemical properties were measured using cyclic voltammetry. Accordingly, the lowest unoccupied molecular orbital (LUMO) energy levels of PCMA and PCBA were -3.66 and -3.57 eV, respectively. Photovoltaic cells were fabricated with a ITO/PEDOT:PSS/poly(3-hexylthiophene)(P3HT):acceptor/LiF/Al configuration, where P3HT and PCBA are the electron donors and acceptors, respectively. The polymer solar cell fabricated using the P3HT:PCBA active layer showed a maximum power conversion efficiency of 0.71%.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2553-2559
• /
• 2011

Two novel quinacridone (QNC) dyes with thiophene or benzene-conjugated bridge and cyanoacrylic acid acceptor were first designed and synthesized for use in dye-sensitized solar cells (DSSCs). The absorption spectra, electrochemical and photovoltaic properties of these dyes were investigated. Under simulated AM 1.5G irradiation conditions, the solar cell based on the quinacridone dye containing thiophene as a bridge unit had a short-circuit photocurrent density of 8.51 $mA{\cdot}cm^{-2}$, an open-circuit voltage of 643.6 mV, and a fill factor of 0.70, corresponding to an overall conversion efficiency of 3.86%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.346.1-346.1
• /
• 2014

Porous nano crystalline $TiO_2$ is currently used as a working electrode in a dye-sensitized solar cell (DSSC). The conventional working electrode is comprised of absorption layer (particle size:~20 nm) and scattering layer (particle size:~300 nm). We inserted window layer with 10 nm particle size in order to increase transmittance and specific surface area of $TiO_2$. The electrochemical impedance spectroscope analysis was conducted to analysis characterization of the electronic behavior. The Bode phase plot and Nyquist plot were interpreted to confirm the internal resistance caused by the insertion of window layer and carrier lifetime. The photocurrent that occurred in working electrode, which is caused by rise in specific surface area, increased. Accordingly, it was found that insertion of window layer in the working electrode lead to not only effectively transmitting the light, but also increasing of specific surface area. Therefore, it was concluded that insertion of window layer contributes to high conversion efficiency of DSSCs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.103.1-103.1
• /
• 2014

Due to their excellent optical and electrochemical properties, conjugated polymers have attracted much attention over the last two decades and employed to opto-electrical devices. In particular, conjugated polymers possess many attractive features that make them suitable for a variety of sensing task. For example, their delocalized electronic structures can be strongly modified by varying the surrounding environment, which significantly affected molecular energy level. In other word, conjugated polymers can detect and transduce the environmental information into a fluorescence signal. Conjugated polymers also display amplified quenching compared to small molecule counterparts. This amplified fluorescence quenching is attributed to the delocalization and migration of the excitons along the conjugated polymer backbones. Long backbones of conjugated polymer provide the transporting path for electron as a conduit, allowing that excitons migrate rapidly into quencher site along the backbone. This is often referred to as the molecular wire effect or antenna effect. Moreover, structures of conjugated polymers can be easily tailored to adjust solubility, absorption/emission properties, and regulation of electron/energy transfer. Based on this versatility, conjugated polymers have been utilized to many novel sensory platforms as a promising material. In this tutorial, I will highlight a variety of fluorescence sensors base on conjugated polymer and explain their sensory mechanism together with selected examples from reference literatures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.55-60
• /
• 2006

Thermally stable and solution-processable poly(N-arylcarbazole-alt-aniline) copolymers with high structural integrity were synthesized in good yields via palladium-catalyzed polycondensation of aniline with corresponding N-arylcarbazole monomers such as N-(2-ethylhexyloxyphenyl)-3,6-dibromocarbazole,bis[6-bromo-N-(2-ethylhexyloxyphenyl)carbazole-3-yl] and N-(4-(2-ethylhexyl)-3,5-dibromomethylene-phenyl) carbazole, respectively. The optical and electrochemical properties of these copolymers were measured and compared with those of poly(N-alkylcarbazole-alt-aniline) copolymer. All synthesized poly(N-arylcarbazole-alt-aniline) copolymers showed maximum UV-Vis absorption peaks at around 300 nm in THF solution, and exhibited maximum photoluminescence peaks in the blue emission range from 430 to 460 nm. It was also found that poly(N-arylcarbazole-alt-aniline) copolymers had wider band gap energy than poly(N-alkylcarbazole-alt-aniline) copolymer.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.183-188
• /
• 2012

A blue phosphorescent $Ir(dfpypy)_3$ (dfpypy:fluorinated pyridine-pyridine ligand) complex with meridional configuration has been synthesized by newly developed effective method and its solid state structure and photoluminescence are characterized. For this complex, mer-$Ir(dfpypy)_3$, the glass-transition and decomposition temperatures appear at $160^{\circ}C$ and $384^{\circ}C$ respectively in TGA and DSC experiments, which indicates that this complex has high thermal stability. In a crystalline structure, an average Ir-C bond length of mer-$Ir(dfpypy)_3$ is slightly longer than that of fac-$Ir(dfpypy)_3$, which assumed to be due to the weak trans-influence. The absorption and emission spectra are observed more red-shifted in mer-$Ir(dfpypy)_3$ than fac-$Ir(dfpypy)_3$. In addition, the former is readily oxidized than the latter in electrochemical behavior.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1389-1395
• /
• 2007

Two series of new organic fluorophores such as asymmetrical 3-(benzimidazol-2-yl)-10-hexylphenothiazine derivatives 1 and symmetrical 3,7-bis(benzimidazol-2-yl)-10-hexylphenothiazine derivatives 2 have been synthesized. Electronic absorption, fluorescence, and electrochemistry measurements reveal that the electron withdrawing benzimidazole subunit directly connected to the phenothiazine core facilitates the charge transfer characters which were also verified by the theoretical calculations. Various substituents on the benzimidazole moieties can allow a fine-tuning of the LUMO energy levels of the molecules without significantly affecting the HOMO energy levels. The method provides a new route for designing ambipolar molecules whose energy levels are well-matched with the Fermi levels of the electrodes to facilitate the electron or hole injection/transfer in OLED devices.

• Journal of the Korean Chemical Society
• /
• v.62 no.6
• /
• pp.427-432
• /
• 2018

The reaction of [$[Ni(L)]Cl_2{\cdot}2H_2O$ (L = 3,14-dimethyl-2,6,13,17-tetraazatricyclo[$14,4,0^{1.18},0^{7.12}$]docosane) with 1,1-cyclohexanediacetic acid ($H_2cda$) yields mononuclear nickel(II) complex, [$Ni(L)(Hcda^-)_2$] (1). This complex has been characterized by X-ray crystallography, electronic absorption, cyclic voltammetry and thermogravimetric analyzer. The crystal structure of 1 exhibits a distorted octahedral geometry with four nitrogen atoms of the macrocycle and two 1,1-cyclohexanediacetate ligands. It crystallizes in the triclinic system P-1 with a = 11.3918(7), b = 12.6196(8), $c=12.8700(8){\AA}$, $V=1579.9(2){\AA}^3$, Z = 2. Electronic spectrum of 1 also reveals a high-spin octahedral environment. Cyclic voltammetry of 1 undergoes one wave of a one-electron transfer corresponding to $Ni^{II}/Ni^{III}$ process. TGA curve for 1 shows three-step weight loss. The electronic spectra, electrochemical and TGA behavior of the complex are significantly affected by the nature of the axial $Hcda^-$ ligand.

• Corrosion Science and Technology
• /
• v.16 no.4
• /
• pp.209-225
• /
• 2017

Development of high strength steel requires proper understanding of hydrogen behavior since the higher the steel strength the greater the susceptibility of hydrogen assisted cracking. This paper provides a brief but broad overview on hydrogen entry and transport behavior of high-strength ferritic steels. First of all, hydrogen absorption, diffusion and trapping mechanism of the steels are briefly introduced. Secondly, several experimental methods for analyzing the physical/chemical nature of hydrogen uptake and transport in the steels are reviewed. Among the methods, electrochemical permeation technique utilized widely for evaluating the hydrogen diffusion and trapping behavior in metals and alloys is mainly discussed. Moreover, a modified permeation technique accommodating the externally applied load and its application to a variety of steels are intensively explored. Indeed, successful utilization of the modified permeation technique equipped with a constant load testing device leads to significant academic progress on the hydrogen assisted cracking (HAC) phenomenon of the steels. In order to show how the external and/or residual stress affects mechanical instability of steel due to hydrogen ingress, the relationship among the microstructure, hydrogen permeation, and HAC susceptibility is briefly introduced.