• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.107-109
• /
• 2006

The purpose of this paper is to introduce the new products for replacing on the old technical cooperation products which have 24 kinds of industrial inverter model. The core algorithm for vector control and sensorless control and the operation program for LCD operator have been developed. Through the continuous test, the improvement of speed/torque control performance and the control program for special target loads will be performed.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.363-365
• /
• 2005

KHSR(Korean High Speed Railway) had achieved the maximum speed of 350 km/h last year. And then, we have concentrated to improve the reliability of the overall system, in particular, motor block of the locomotive. In this paper, simple technique for operating PWM converters under the voltage distortion is introduced. In addition, the electrical braking technique is also made to have the braking capability under the dead zone. Test results revealed the verification of the proposed techniques.

• Design & Manufacturing
• /
• v.13 no.1
• /
• pp.13-18
• /
• 2019

The size and prospects of the domestic semiconductor equipment market are increasing every year. In the case of various parts used inside semiconductor equipments, high durability such as high strength and abrasion resistance is demanded. Particularly, the gases used in semiconductor production processes are toxic. In order to prevent such toxic gas leakage, a precision processing technique and a surface treatment technique for preventing corrosion are required. Electro-polishing is an electro-chemical method of polishing a metal surface to make it smooth and polished. Electro-polishing is mainly used in the finishing process of metal surface. Unlike mechanical polishing, electro-polishing is used in many fields, such as fine chemical etching equipment, since no damaged layer or burr, fine polishing groove and particles are generated. However, in order to withstand the gas used in the semiconductor equipment, the parts must have high corrosion resistance. However, the surface hardness generally become lowered through electro-polishing. Therefore, in this study, surface hardness were experimentally observed before and after electro-polishing. Then, a method of improving hardness by preparing a nitrided layer by plasma ion nitriding treatment.

• Smart Structures and Systems
• /
• v.13 no.4
• /
• pp.517-546
• /
• 2014

This paper proposes a refined electro-mechanical beam formulation. Lagrange-type polynomials are used to interpolate the unknowns over the beam cross section. Three- (L3), four- (L4), and nine-point(L9) polynomials are considered which lead to linear, bi-linear, and quadratic displacement field approximations over the beam cross-section. Finite elements are obtained by employing the principle of virtual displacements in conjunction with the Carrera Unified Formulation (CUF). The finite element matrices and vectors are expressed in terms of fundamental nuclei whose forms do not depend on the assumptions made. Additional refined beam models are implemented by introducing further discretizations, over the beam cross-section. Some assessments from bibliography have been solved in order to validate the electro-mechanical formulation. The investigations conducted show that the present formulation is able to detect the electro-mechanical interaction.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.640-643
• /
• 2006

In this paper, electro-mechanical coupling of cellulose-based Electro-Active Paper (EAPap) actuator is investigated by measuring induced strain and mechanical properties with and without electric excitation. The maximum induced in-plane strain is measured at the orientation angle of 45? samples. The elastic modulus and strength of EAPap are increased with electric excitation and the orientation angle of $45^{\circ}$ samples shows the largest increment of mechanical properties. From the observations, shear piezoelectricity is considered as the major piezoelectric mode of EAPap.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1195-1196
• /
• 2008

최근, 친환경 물질이면서 광유에 비하여 발화점이 높은 식물성절연유에 대한 관심이 고조되고 있으며 식물성절연유변압기의 사용이 미주 등 해외시장에서 급격하게 증가되고 있다. 본 연구에서는 송전급 식물성절연유변압기 개발을 위하여 액체절연 매질의 고전압 시험법을 검토하고 전극 간 이격 거리에 따른 절연파괴 시험을 통하여 식물성절연유의 절연성능을 평가하였다. Weibull 분포와 전계해석을 이용하여 2% 절연파괴전압을 산출하고 전계분포를 계산하여 기존의 변압기 절연매질인 광유와 비교하였다. 본 연구 결과는 향후 식물성 절연유변압기 제작에 필요한 설계 자료로 활용될 것이다.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.8-10
• /
• 2005

In a general purpose inverter, a dead-time compensation strategy is very important for reducing torque ripples and acoustic noises of motors. However, in the case of small capacity inverter, the accurate dead-time compensation is hard to be obtained because a removal of the switching noise in a feedback current signal is difficult on condition of low-cost implementation. In this paper, the operation characteristics of the general purpose inverter applied the dead time compensation algorithm using an instantaneous back calculation of the phase angle of the current are presented.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.828-830
• /
• 2003

AVR은 동기발전기의 출력전압을 부하변동에 관계없이 일정하게 제어하며 발전기 및 시스템 보호를 위한 각 종 제어 알고리즘을 구비하고 있다. 종래의 아나로그타입 AVR은 제어설정이 불편하고 제어신뢰성이 떨어지기 때문에 점차 디지털 타입으로 교체되고 있다. 본 연구는 선박발전기에 적용하기 위한 디지털 AVR 개발에 관한 것이다. TI사의 TMS320LF2407 CPU를 사용하여 제어 H/W를 개발했으며, 과여자/저여자제어, Droop제어, 무부하/역률제어 등 다양한 제어기능을 S/W로 구비하여 부하에 따른 적용의 유연성을 높였다. 그리고 전력회로는 IGBT를 사용하여 고속 스위칭 제어함으로써 SCR 방식에 비해 제어 속응성을 개선하였다. 개발 된 제품은 AVR, 직류전원공급장치 및 부하나 계통의 사고시 보호를 위한 전류부스트(CBS)기능을 포함하고 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.462-465
• /
• 2009

Cellulose based electro-active paper (EAPap) is a new smart material that has a potential to be used in biomimetic actuator and sensor. Beside of the natural abundance, cellulose EAPap is fascinating with its biodegradability, lightweight, high mechanical strength and low actuation voltage. An actuating mechanism of EAPap is revealed to be the combination of ion migration effect and piezoelectricity. EAPap can generate the electrical current and voltage when the mechanical stress applied due to its electro-mechanical characteristics. In this paper, we investigated the feasibility of EAPap as a mechanical strain sensor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.1
• /
• pp.50-57
• /
• 2022

Reliability of CMOS has been severed under aggressive device scaling. Conventional technologies such as lightly doped drain (LDD) and forming gas annealing (FGA) have been applied for better device reliability, but further advances are modest. Alternatively, electro-thermal annealing (ETA) which utilizes Joule heat produced by electrodes in a MOSFET, has been newly introduced for gate dielectric curing. However, concerns about mechanical stability during the electro-thermal annealing, have not been discussed, yet. In this context, this paper demonstrates the mechanical stability of nanosheet FET during the electro-thermal annealing. The effect of mechanical stresses during the electro-thermal annealing was investigated with respect to device design parameters.