• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.3-5
• /
• 1994

The SRM can be operated on the high speed range in which the back-emf is greater than the DC link voltage. However, the phase current of the SRM should be controlled through the selection of an exciting angle since it can not be controlled by a chop of the DC link voltage in the high speed range. In this paper, a PI and a bang-bang controller are employed in order to control the speed of the SRM and the leading angle of the SRM is adapted as a control input. The performances of two controllers are evaluated by computer simulation. The results show that the bang-bang controller is more attractive than the PI controller in the cost and performance aspects.

• 조명전기설비학회논문지
• /
• 제27권6호
• /
• pp.59-67
• /
• 2013

This paper presents a neural net type process model for enhancing learning compensation function in hot strip finishing rolling mill. Adequate input and output variables of process model are chosen, the proposed model was designed as single layer neural net. Equivalent carbon content, strip thickness and rolling speed are suggested as input variables, and looper's manipulation variable is proposed as output variable. According to simulation result using process data to show the validity of the proposed process model, neural net type process model's outputs give almost similar data to process output under same input conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2107-2108
• /
• 2006

본 논문에서는 범용 공학 소프트웨어인 셈툴과 연계한 FEM 패키지의 3D Visualization 및 Operation에 대해 기술 한다. FEM 해석을 위한 Graphical Interface로서 각종 오브젝트의 생성, 로드와 더불어 해당 오브젝트를 3D Visualization하여 각종 Manipulation을 하는 기법에 대해 서술하도록 한다. 특히, 해석에 필요한 경계 조건이나 하중을 부여하기 위해 노드를 Picking 하는 기법과, 해석 후 객체의 내부 하중 상태 등에 대한 컨투어링을 위해 객체를 분할하는 Cut Section 등에 대해서도 다루도록 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2806-2808
• /
• 2005

The Controller Area Network (CAN) is being widely used for real-time control application and small-scale distributed computer controller systems. When the stuff bits are generated by bit-stuffing mechanism in the CAN network, it causes jitter including variations in response time and delay. In order to eliminate this jitter, stuff bit must be controlled to minimize the response time and reduce the variation of data transmission time. At first, this paper shows that conventional CAN protocol causes the transmission time delay. Secondly, this paper proposes the method to reduce the stuff bits by restriction of available identifier. Finally, data manipulation method can be reduced the number of stuff-bits in the data field. The proposed restriction method of ID and manipulating data field are pretty useful to the real-time control strategy with respect to performance. These procedures are implemented in local controllers of the ISHURO (Inha Semyung Humanoid Robot).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.597-599
• /
• 1995

We have analyzed the dielectrophoretic(DEP) force on a cell in a micro planar electrode structure. We fabricate a micro planar electrode structure using micro machining technology and measure the motion of a cell that is accelerated by DEP force. DEP force on a cell is calculated by curve fitting the motion of a cell. Radish and yeast are used for the experiment. In case of radish, DEP force is increased as the voltage and the frequency is increased, and in case of yeast, DEP force is increased only as the voltage is increased DEP force on a yeast does not vary when the frequency varies from 1 MHz to 3 MHz. The result will be helpful to the manipulation of cells using DEP force.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.85-87
• /
• 1994

Feeding biological cells one by one is the key point in the manipulation of cells. The conventional valve systems have many difficulties in feeding cells one by one, because they shut the whole flow of fluids when they are closed and have possibilities of breaking the fragile cells. They need some other equipments for continuous supply of suspension and to protect the cells. We design a check valve for feeding biological cells one by one using polyimide all the silicon substrate. The cells are fed by hydraulic pressure through the isotropically etched cavity. When the suspension flows continuously along the channel the valve is bent by hydraulic pressure and a cell is fed to the outlet. We have studied a cell fusion device fabricated with polyimide and electroplating. If the designed check valve is located in front of the cell fusion device it is helpful to fuse two different kinds of cells.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.3109-3111
• /
• 2000

Recently. internet applications for efficient cyber education have drawn much interests. The world-wide web provides new opportunities for cyber education over the internet. This paper presents a virtual lab system which can be used on the world-wide web. The proposed virtual lab system provides the improved learning methods which can enhance the educational efficiency in electrical engineering experiments. If the students enter the virtual lab system on the web. they can make experiments on basic electrical and electronic principles through simple mouse manipulation. Since proposed virtual lab system is implemented to describe the actual lab system. the students can obtain similar experimental data through it. Several sample Java applets are illustrated as examples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.226-229
• /
• 1987

This paper was aimed to, using a new data structure, develop a set of algorithms to execute the output function of Digital System. These functions were represented as directed, acyclic graphs. by applying many restrictions on vertices on graph, the efficient manipulation of boolean function was accomplished. The results were as follows; 1. A canonical representation of a boolean function was created by the reduction algorithm. 2. The operation of two functions was accomplished using t he apply algorithm, according to the binary operator. 3. The arguments having 1 as the value nf function were enumerated using the satisfy algorithm. 4. Composing TTL 74181 4-bit ALU and 74182 look-ahead carry generator, the ALU having 4-bit and 16-bit as word size was implemented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.383-386
• /
• 1993

In this paper, we propose a sensory data combination method by a fuzzy number approach for multisensor data fusion. Generally, the weighting of one sensory data with respect to another is derived from measures of the relative reliabilities of the two sensory modules. But the relative weight of two sensory data can be approximately determined through human experiences or insufficient experimental data without difficulty. We represent these relative weight using appropriate fuzzy numbers as well as sensory data itself. Using the relative weight, which is subjective valuation, and a fuzzy-numbered sensor data, the fuzzy weighted average method is used for a representative sensory data. The manipulation and calculation of fuzzy numbers can be carried out using the Zadeh's extension principle which can be approximately implemented by the $\alpha$-cut representation of fuzzy numbers and interval analysis.

• 한국전기전자재료학회논문지
• /
• 제31권2호
• /
• pp.85-89
• /
• 2018

In this study, functional transparent conducting layers were investigated for Si-based photoelectric applications. Double transparent conductive oxide (TCO) films were deposited on a Si substrate in the sequence of indium tin oxide (ITO) followed by aluminum-doped zinc oxide (AZO). First, we observed that the conductivity and transparency of AZO dominate the overall performance of the double TCO layers. Secondly, the double layered TCO film (consisting of AZO/ITO) deposited by sputtering was compared to a AZO-only film in terms of their optical and electrical properties. We prepared three different AZO films: ITO:3min/AZO:10min, ITO:5min/AZO:7min, and ITO:7min/AZO:4min. The results show that the optical properties (transmittance, absorbance, and reflection) can be controlled by the film composition. This may provide a significant pathway for the manipulation of the optical and electrical properties of photoelectric devices.