• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2739-2746
• /
• 2011

This paper proposes the method for more effectively calculating X/R which is the ratio of equivalent reactance(X) and resistance(R) of the bulk power system and analyses the characteristic of X/R values by applying the proposed method to the real bulk power systems. X/R is used to determine the rating of the relay in the bulk power systems and its value has been accepted to be big enough to ignore the equivalent resistance of the bulk power systems. However, X/R is calculated as a big number when only the upper transformer and transmission line are considered. The correct approach to calculating X/R needs to consider all the parameters including generators, transformers, lines and loads. This paper calculates X/R of the bulk power systems using dynamic models which have been used to analyse the power system stability. The effectiveness of the proposed method is verified by applying it to the test system and X/R values of the real bulk power systems are analyzed. In addition, the dependence of X/R on the closeness of its calculating locations to the generator is verified by using the marginal loss factor which has been used in the electricity market.

• Composites Research
• /
• v.26 no.5
• /
• pp.289-294
• /
• 2013

A thinner is used to improve the multi-walled carbon nano-tube (CNT) and carbon black (CB) dispersion in a polymer matrix and to make a soft electrode. The electrical and mechanical properties of the soft electrodes are investigated as functions of CNT, CB and thinner content. The optimal mixing condition for the electrode is thinner 80, CNT 3.5, CB 18 (phr) on the basis of matrix (KE-12). The specific resistance of that is 73 (${\Omega}{\cdot}cm$), and tensile strength, tensile modulus, and elongation of that is 0.45 MPa, 0.21 MPa, and 184%, respectively. Also, a simple structure of the actuator with an optimized electrode and elastomer is fabricated and its characteristic is evaluated. At the operating voltage 25 kV, the displacement of an elastomer KE-12 is 2.24 mm, and that of an elastomer KE-12 with thinner 50 (phr) is 4.05 mm. It shows a higher displacement compared to that of 3M 4910 which has similar modulus. The actuator made with elastomer and electrode of the same material (KE-12) may have advantages for fatigue life and application.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.211-218
• /
• 2012

Fossil fuel is used all over the world and it produces greenhouse gases due to fossil fuel use. Therefore, it cause global warming and is serious environmental pollution. In order to decrease the environmental pollution, we should use renewable energy which is clean energy. Among several renewable energy, wind energy is the most promising one. Wind power generation is does not produce environmental pollution and could not be exhausted. However, due to wind power generation has irregular power output, it is important to predict generated electrical energy accurately for smoothing wind energy supply. There, we consider use ramp characteristic to forecast accurate wind power output. The ramp increase and decrease rapidly wind power generation during in a short time. Therefore, it can cause problem of unbalanced power supply and demand and get damaged wind turbine. In this paper, we make prediction models using power ramp rate as well as wind speed and wind direction to increase prediction accuracy. Prediction model construction algorithm used multilayer neural network. We built four prediction models with PRR, wind speed, and wind direction and then evaluated performance of prediction models. The predicted values, which is prediction model with all of attribute, is nearly to the observed values. Therefore, if we use PRR attribute, we can increase prediction accuracy of wind power generation.

• Korean Journal of Environment and Ecology
• /
• v.33 no.6
• /
• pp.708-721
• /
• 2019

This study was conducted to understand the plant community structure characteristics of warm-temperate forest in Geoje Island. Survey sites were set up on ridges, valleys, and slopes where evergreen broad-leaved trees predominated or distributed in canopy, sub-canopy, or shrub layers at Chunjangsan(Mt.). Thirty-one sites were located in the areas, such as vegetation community, ridges, valleys, and slopes, to observe vegetation structure and location changes. The community classification with TWINSPAN identified six groups: Neolitsea sericea-Platycarya strobilacea, N. sericea-Styrax japonicus, N. sericea-Euonymus oxyphyllus, Pinus thunbergii-N. sericea, N. sericea-Quercus serrata, and Q. variabilis-P. strobilacea. Considering the results of previous studies that reported that the successional pattern of the warm temperate forests progressed from deciduous to evergreen forests, the regions predominated by deciduous communities such as P. thunbergii, Q. serrata, P. strobilacea, Zelkova serrata, and Q. variabilis, is likely to transform into the evergreen forest predominated by N. sericea. The relationship between the impact of the environmental factors and the vegetation distribution showed that slope, Na +, K +, electrical conductivity, and clay among physical properties had direct or indirect effects on vegetation distribution.

• Journal of The Korean Association of Information Education
• /
• v.20 no.4
• /
• pp.375-386
• /
• 2016

Research of information gifted analysis through the adult gifted electrical of information field is not nearly done. Therefore, there is a need for a study to analyze the information gifted property through the life of adult talent. In the present study, the 'Alan Turing' who left the achievements in the field of information was chosen to study. And analyzed the biographies of Alan Turing in the content analysis method was used to derive the factor of information gifted property. As a result, it was found that it contain twelve factors to information gifted of the two regions of Alan Turing. The information special education for extending the gifted of information that is exposed in various forms, there is a need to provide a curriculum that can extend the capabilities of mathematics and science education methods, long-term and multilateral it is necessary to determine the tools and good sense of the information talent teacher that can be to determine the information gifted. Based on this understanding, in future studies, to determine the elementary school information gifted, various information gifted either present were present as may be a substantial aid targeting a map information gifted of the factor analysis, there is a need to be sustained process of information gifted expression of adult information gifted in the direction of a more systematic analysis.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.122-133
• /
• 1998

The CL network fer CBDS(Connectionless Broadband Data Service) defined by ITU-(International Telecommunication Union-Telecommunication) consists of CL(ConnectionLess) servers which route frames and links which connect between CL user and CL server or between CL servers[1][2]. In this configuration, two kinds of congestion, CL link congestion and CL server congestion may occur. Therefore this paper has proposed the scheme that can deal with the above congestion state of LAN traffic efficiently in interworking LANs in ATM network. Proposed schemes ale link-by-link scheme and hybrid scheme. Link-by-link scheme uses the ABR feedback loops of AIM layer between CL user and CL server or between CL servers, and the header translation table carrying out the routing function of frame. And hybrid scheme is the scheme that adds end-to-end loop to link-by-link scheme and then uses RM message using CLNAP-PDU(ConnectionLess Network Access Protocol - Protocol Data Units) of CL layer. These schemes can be implemented easily because of using the ABR loop of ATM layer, end-to-end loop of CL layer, and the routing function of CL server. In this paper the characteristic and effects of two schemes in CL server bas been compared and analyzed.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.1-14
• /
• 1998

In this paper, Antenna, LNA, Mixer, VCO, and Modulation/Demodulation in Baseband processor which are the RF main components in Wireless LAN system for ultra high-speed communications network are studied. Antenna bandwidth and selective fading due to multipath can be major obstacles in high speed digital communications. To solve this problem, wide band MSA which has loop-structure magnetic antenna characteristics is designed. Distributed mixer using dual-gate GaAs MESFET can achieve over 10dB LO/RF isolation without hybrid, and minimize circuit size. As linear mixing signal is produced, distortions can be decreased at baseband signals. Conversion gain is achieved by mixing and amplification simultaneously. Mixer is designed to have wide band characteristics using distributed amplifier. In VCO design, Oscillator design method by large signal analysis is used to produce stable signal. Modulation/Demodulation system in baseband processor, DS/SS technique which is robust against noise and interference is used to eliminate the effect of multipath propagation. DQPSK modulation technique with M-sequences for wideband PN spreading signals is adopted because of BER characteristic and high speed digital signal transmission.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.80-87
• /
• 2006

In this paper, we analyze the performance of IEEE 802.11b WLAN communication between access point(AP) and mobile equipment(ME) in 2.4 GHz band with noise and interference factors. WLAN communication at in-vehicle environment is assumed as the communication between main vehicle controller and electronic device such as sensor, ECU (Electrical Control Unit) in vehicle on telematics field for implementing wireless vehicle control system. Received interference level from other system's mobile equipment in the same band and automobile noise from each part of vehicle can be the main factors that can cause increasing error rate of control signal. With these (actors, we focus on the Eb/No the BER performance of WLAN for analyzing the characteristic of interference factors by the measured bit error rate.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.400-403
• /
• 2002

The fundamental experiments for measuring soft x-ray characteristics from the vacuum capillary are described. These experiments were primarily performed in order to generate line spectra such as x-ray lasers. The generator consists of a high-voltage power supply, a polarity-inversion ignitron pulse generator, a turbo-molecular pump, and a radiation tube with a capillary. A high-voltage condenser of 200 nF in the pulse generator is charged up to 20 kV by the power supply, and the electric charges in the condenser are discharged to the capillary in the tube after closing the ignitron. During the discharge, weakly ionized plasma forms on the inner and outer sides of a capillary. In the present work, the pump evacuates air from the tube with a pressure of about 1 mPa, and a demountable capillary was developed in order to measure x-ray spectra according to changes in the capillary length. In this capillary, the anode (target) and cathode elements can be changed corresponding to the objectives. The capillary diameter is 2.0 mm, and the length is adjusted from 1 to 50 mm. When a capillary with aluminum anode and cathode electrodes was employed, both the cathode voltage and the discharge current almost displayed damped oscillations. The peak values of the voltage and current increased when the charging voltage was increased, and their maximum values were -10.8 kV and 4.7 kA, respectively. The x-ray durations observed by a 1.6 ${\mu}$m aluminum filter were less than 30 ${\mu}$s, and we detected the aluminum characteristic x-ray intensity using a 6.8 ${\mu}$m aluminum filter. In the spectrum measurement, two sets of aluminum and titanium electrodes were employed, and we observed multi-line spectra. The line photon energies seldom varied according to changes in the condenser charging voltage and to changes in the electrode element. In the case where the titanium electrode was employed, the line number decreased with corresponding decreases in the capillary length. Compared with incoherent visible light, these rays from the capillary were diffracted and diffused greatly after passing through two slits.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.488-495
• /
• 2012

The real-time indoor location technology using radio waves has been studied in a variety of environments. One of them, a ship which consists of steel structure has high reception rate but causes significant ranging error due to the reflection of radio waves. In order to reduce location measurement errors that occurs in such a environment, this paper, based on CSS of IEEE 802.15.4a, presents compensation algorithm for localization using modified bilateration and pyroelectric sensor in a ship. The proposed system reduces the number of fixed nodes by estimating the appropriate reception distance between mobile node and fixed node through the analysis of CSS characteristic in a narrow passage such as ship corridors. Also, in the corner section which the ranging errors are significantly fluctuated due to the reflection and diffraction of radio waves, we recognize the location by tracking the a moving section using modified bilateration technique and pyroelectric sensor. The experimental results show that the location accuracy and efficiency of the proposed algorithm are improved 86.2 % compared to general method.