• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.3
• /
• pp.290-296
• /
• 2015

This paper presents a novel educational model of subjects of electric, electronic and control for marine engineer in accordance with STCW 2010 amendments. In accordance with STCW 2010, contents of such courses in marine engineering operations of undergraduate programs in maritime university should be updated correspondingly to new features. In order to propose the model, this paper analyses and reviews subjects on electric, electronic and control in STCW convention compared to STCW 1995. Also, in this paper, subjects of electric, electronic and control in marine engineering operations in Korea and other countries are analyzed and a new educational model is proposed. in theoretical perspective and practical perspective.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.2
• /
• pp.237-240
• /
• 2021

Failure of a suspension clamp made of hot dip galvanized cast iron in 154kV transmission tower was investigated. Metallurgical analysis of a crack of the clamp was performed using a digital microscope, an optical microscope, and a scanning electron microscope. It was revealed that the crack surface was covered by continuous zinc layer. Distinctive casting skin was found underneath both the outer surface and crack surface. The result showed that pre-existing crack had been formed in the fabrication, and liquid metal embrittlement during hot dip galvanization may assist crack propagation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.61-62
• /
• 2023

In this study, the steel slag was immersed in CO₂ nano-bubble water by Electric arc funace it was accelerated aging was reviewed through XRD analysis. The main minerals of the electric furnace oxidized slag were spinel and gehlenite, and there was no change with the number of CO₂ nano-bubbles. Minerals such as larnite, calcio-olivine, agnetite, calcite, and spinel were distributed in electrically reduced slag, and the content of calcite more than doubled with CO₂ nano-bubble immersion. Therefore, it is judged that the acceleration aging of Electric arc funace reduced slag is effective according to the immersion of CO₂ nano-bubble.

• Journal of Korean Institute of Fire Investigation
• /
• v.11 no.1
• /
• pp.66-73
• /
• 2008

In this research, the electric power consumptions of the electrical machinery and appliances selected in the Seoul division of Korea Electrical Safety Corporation were measured. The power-saving efficiency was investigated by comparing the amounts of the reserved electric power when the Saver was on or off through measuring that of the reserved electric power before and after equipping the selected appliances with the Saver, a cutoff of the reserved electric power. As a result, the power-saving efficiency was around 18% when the Saver was installed. It can be ascribed to the removal of the source wasting electrical energy. Furthermore, by blocking the reserved electric power, the electric fire can be originally prevented and also the life time of the electrical machinery and appliances can be postponed.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.381-384
• /
• 2008

This paper presents an operational technique to maximize profit of a cogeneration power plant. To minimize errors in a loss and gain analysis of a cogeneration power plant, the energy sale profit in the cost-based-pool electric power trade market, the heat sale profit, and the supplementary fund profit for electric power industry are taken into consideration. The objective is to optimize the heat-electric power ratio to maximize profit of a cogeneration power plant. Furthermore, the constrained bidding technique to optimize heat-electric power ratiocan be obtained. Profits from of a cogeneration power plant are composed of three categories, such as the energy sale profit in the cost-based-pool electric power trade market, the heat sale profit, and the supplementary fund profit for electric power industry. Profits of a cogeneration power plant are varied enormously by the operation modes. The profits are mainly determined by the amount of constrained heat generation in each trading time. And the three profit categories arecoupled tightly via the heat-electric power ratio. The result of this case study can be used as a reference to a cogeneration power plant under the power trading system considered in this case.

• KSTLE International Journal
• /
• v.2 no.2
• /
• pp.142-145
• /
• 2001

The electrorheology of the chitosan adipnate suspension in silicone oil was investigated. Chitosan adipnate suspension showed a typical ER response (Bingham flow behavior) upon application of an electric field. The shear stress for the chitosan adipnate suspension exhibited a linear dependence on the volume fraction of particles and an electric field power of 1.88. The experimental results for the chitosan adipnate suspension correlated with the conduction models and this suspension was found to be an anhydrous ER fluid.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1592-1593
• /
• 2011

전 세계적으로 전력사용량의 증가와 전력기술이 발전함에 따라 절연소재 또한 급속한 발전을 가져왔다. 특히 폴리머 애자는 경량성, 내오염성, 시공의 용이성 등과 같은 장점으로 오랫동안 사용해온 자기 애자를 대체하여 사용되고 있다. 최근 고효율 장거리 전력 송전이 가능한 HVDC 송전선로가 증가함에 따라 직류 절연물에 대한 연구가 활발히 이루어지고 있다. 본 연구에서는 두 종류의 실리콘 베이스와 첨가제 함량을 변화시킨 폴리머 시편의 직류 파괴전압 실험과 교류 파괴전압 실험을 실시하였다. 취득한 데이터를 Weibull 분포를 통해 분석 한 결과 직류 파괴전압이 교류 파괴전압에 비해 2~5배 높은 것으로 나타났다.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.373-375
• /
• 2008

TTCN-3(Testing & Test Control Notation Version 3) defined in EISI(2001) are the standardized test specification and test implementation language of applicable for all kinds of black-box testing for reactive and distributed system, telecom systems, Mobile system, Internet, CORBA based system, java, XML, etc. This paper using the TTCN-3 on an Electric Power IT Protocol DLMS(Device Language Message Specification) standards for the implementation of the device equipment test the suitability of the protocol.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1722-1723
• /
• 2008

This paper present dynamic stiffness of servo motor using labVIEW PXI module. In speed control loop, we apply proportional gain and integral gain, using PID controller, respectively in servo motor and confirmed dynamic stiffness of servo motor varing each gain. Changing proportional gain and integral gain, confirm what effect in dynamic stiffness are change in frequency response..

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.1
• /
• pp.41-47
• /
• 2020

The contribution of damage mechanisms to failure of steam turbine casing made of Cr-Mo-V steel was investigated. Creep-fatigue interaction on the HP side corner of turbine casing was revealed as the root cause of the catastrophic failure performed by metallurgical analysis. The steady-state pressure and transient thermal stress were analyzed based on the actual operating condition of the thermal plant. Damage of creep-fatigue interaction to crack initiation was evaluated with multiaxial effects. The contribution ratio of creep and fatigue to the crack initiation was estimated to 3:1. Temporary geometrical correct action with repair weld was executed. For long-term operation, design improvement of casing equipment for creep resistance should be needed.