• 제목/요약/키워드: electric current pulse

검색결과 227건 처리시간 0.021초

광계수방식 물리입자 검출용 ASIC 설계 (An ASIC Design for Photon Pulse Counting Particle Detection)

  • 정준모;소명진;김효숙;한아름;소슬이
    • 전기전자학회논문지
    • /
    • 제23권3호
    • /
    • pp.947-953
    • /
    • 2019
  • 본 연구는 가시광선, 적외선, 자외선 등이 대기 중의 물리입자에 의해 산란되는 빛(광자)을 받아서 발생하는 전하(전자 전공 쌍)를 집적하여 전압신호로 변환 및 증폭하는 전치증폭단과, 증폭된 신호의 파형을 semi-gaussian으로 보정하는 파형보정기 및 신호의 크기를 임의의 기준전압과 비교하여 신호 크기에 따른 펄스를 2진수 디지털 신호로 출력시키는 비교기와 계수기를 포함하는 물리입자 검출용 ASIC 칩 설계에 관한 것이다. 본 연구에서 제안한 구조 및 기능 블록을 갖는 ASIC은 Global Foundries의 0.18um standard CMOS 공정 변수를 사용하여 설계하였으며, 동 공정을 이용하여 칩을 제작하여 동작 및 성능을 검증 확인하였다.

고출력전자기파에 의한 반도체부품의 고장메커니즘 고찰 (Review of Failure Mechanisms on the Semiconductor Devices under Electromagnetic Pulses)

  • 김동신;구용성;김주희;강소연;오원욱;천성일
    • 한국산학기술학회논문지
    • /
    • 제18권6호
    • /
    • pp.37-43
    • /
    • 2017
  • 본 논문에서는 고출력 전자기파 (Electromagnetic pulses, EMP) 영향에 의해 발생하는 반도체 부품의 물리적 상호작용에 대한 원리와 고장 발생 메커니즘의 연구를 위해 선행된 연구 내용을 고찰하였다. 반도체 부품에서의 전자기파 전이 과정은 3층 (공기/유전체/도체) 구조로 설명할 수 있으며, 복소반사계수에 의하여 이론적으로 흡수되는 에너지를 예상할 수 있다. 반도체 부품에 전달된 과도한 고출력 전자기파로 인한 반도체 부품의 주요 고장 원인은 전자기파 커플링에 의한 부품 소재의 줄 열에너지의 발생이다. 전기장에 의한 유전가열과 자기장에 의한 맴돌이손실에 의해 반도체 칩의 P-N 접합 파괴, 회로패턴의 burn-out과 리드 프레임과 칩을 연결하는 와이어의 손상 등이 발생한다. 즉, 반도체 부품에 전달된 전자기파는 반도체 내부 물질과 상호작용을 하며, 쌍극자분극과 이온 전도도 현상이 동시에 발생하여, 칩 내부의 P-N 접합 부분에 과도한 역전압이 형성되어 P-N 접합 파괴를 유발한다. 향후 고 신뢰성을 요구하는 전기전자시스템에 대한 EMP 내성을 향상하기 위한 반도체 부품 수준의 연구가 필요하다.

Silver nanowires and nanodendrites synthesized by plasma discharge in solution for the catalytic oxygen reduction in alkaline media

  • 김회근;송면규;김동우;이상율
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2018년도 춘계학술대회 논문집
    • /
    • pp.62-62
    • /
    • 2018
  • Pt is still considered as one of the most active electrocatalysts for ORR in alkaline fuel cells. However, the high cost and scarcity of Pt hamper the widespread commercialization of fuel cells. As a strong candidate for the replacement of Pt catalyst, silver (Ag) has been extensively studied due to its high activity, abundance, and low cost. Ag is more stable than Pt in the pH range of 8~14 as the equilibrium potential of Ag/Ag+ being ${\approx}200mV$ higher than that of Pt/PtO. However, Ag is the overall catalytic activity of Ag for oxygen reduction reaction(ORR) is still not comparable to Pt catalyst since the surface Ag atoms are approximately 10 times less active than Pt atoms. Therefore, further enhancement in the ORR activity of Ag catalysts is necessary to be competitive with current cutting-edge Pt-based catalysts. We demonstrate the architectural design of Ag catalysts, synthesized using plasma discharge in liquid phase, for enhanced ORR kinetics in alkaline media. An attractive feature of this work is that the plasma status controlled via electric-field could form the Ag nanowires or dendrites without any chemical agents. The plasma reactor was made of a Teflon vessel with an inner diameter of 80 mm and a height of 80 mm, where a pair of tungsten(W) electrodes with a diameter of 2 mm was placed horizontally. The stock solutions were made by dissolving the 5-mM AgNO3 in DI water. For the synthesis of Agnanowires, the electricfield of 3.6kVcm-1 in a 200-ml AgNO3 aqueous solution was applied across the electrodes using a bipolar pulsed power supply(Kurita, Seisakusyo Co. Ltd). The repetition rate and pulse width were fixed at 30kHz and 2.0 us, respectively. The plasma discharge was carried out for a fixed reaction time of 60 min. In case of Ag nanodendrites, the electric field of 32kVcm-1 in a 200-ml AgNO3 aqueous solution was applied and other conditions were identical to the plasma discharge in water in terms of electrode configuration, repetition rate and discharge time. Using SEM and STEM, morphology of Ag nanowires and dendrites were investigated. With 3.6 kV/cm, Ag nanowire was obtained, while Ag dendrite was constructed with 32 kV/cm. The average diameter and legth of Ag nanowireses were 50 nm and 3.5 um, and thoes values of Ag dendrites were 40 nm and 3.0 um. As a results of XPS analysis, the surface defects in the Ag nanowires facilitated O2 incorporation into the surface region via the interaction between the oxygen and the electron cloud of the adjacent Ag atoms. The catalytic activity of Ag for oxygen reduction reaction(ORR) showed that the catalytic ORR activity of Ag nanowires are much better than Ag nanodendrites, and electron transfer number of Ag nanowires is similar to that of Pt (${\approx}4$).

  • PDF

가상 Frisch-그리드를 이용한 CdZnTe 감마선 소자 제작 (Fabrication of Virtual Frisch-Grid CdZnTe ${\gamma}$-Ray Detector)

  • 박찬선;김필수;조평곤;김정민;최종학;김기현
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제37권4호
    • /
    • pp.253-259
    • /
    • 2014
  • Traveling heater method(THM) 방법을 이용하여 성장시킨 CdZnTe(CZT) 단결정 방사선 소자에 대한 고에너지(high energy) 감마선 에너지 분해능(energy resolution)을 평가하고자 $6{\times}6{\times}12mm^3$ 크기의 CZT 소자를 제작하였다. 두꺼운 방사선 소자의 경우, 전자에 비해 상대적으로 이동속도가 느린 정공(hole)으로 인해 발생하는 hole-tailing 효과가 심화되어 고에너지 영역의 에너지 분해능이 저하되는 현상이 발생한다. 전자(electron)와 정공(hole)의 두 개의 전하 운반자(charge carrier) 중에서 하나의 전하 운반자를 선택적으로 수집하여 에너지 분해능을 높이는 것이 가능하다. 가상 Frisch-그리드(virtual Frisch-grid) 소자는 소자 내부의 가중 퍼텐셜(weighting potential)을 조절하여 전자에 의한 유도전류(induced current)만을 선택적으로 이용하는 방법으로써 제작 과정과 적용이 용이하다. 본 연구에서는 THM 방법으로 성장한 큰 부피의 CZT 방사선 소자의 특성과 가상 Frisch-그리드의 효용성을 평가하였다. 가상 Frisch-그리드의 적절한 위치와 너비는 Maxwell ver.14(ANSYS, 미국)를 이용하여 모의실험으로 정하였다. $^{137}Cs$ 동위원소를 이용한 펄스 높이 스펙트럼(pulse height spectrum) 측정에서 가상 Frisch-그리드를 적용했을 때 662 keV 피크에 대해 2.2%의 에너지 분해능을 확인할 수 있었다.

XLPE 케이블에서 보이드 결함의 부분방전 특성과 위치추정 (Partial Discharge Characteristics and Localization of Void Defects in XLPE Cable)

  • 박서준;황성철;왕국명;길경석
    • 한국철도학회논문집
    • /
    • 제20권2호
    • /
    • pp.203-209
    • /
    • 2017
  • 전력공급의 안정성 및 신뢰도 향상을 위해 각종 전력설비의 예방진단에 관한 연구개발이 활발하다. 가스절연개폐장치와 변압기와 같은 단위 기기의 절연진단기술은 빠르게 발전하고 있으나, 전력케이블에 있어서는 단순히 결함의 유무와 부분방전을 측정할 뿐, 세부적 특성에 대해서는 거의 연구되고 있지 않다. 따라서 본 논문에서는 XLPE 케이블에서 보이드의 크기와 위치에 따른 부분방전 특성과 결함의 위치추정에 관한 연구를 수행하였다. 보이드의 크기 및 위치에 따른 4종의 결함계를 모의하였으며, 부분방전펄스는 주파수 대역 150kHz~30MHz의 고주파변류기로 검출하였다. 실험결과, 도체에 인접한 결함일수록 방전전하량이 크고, 정극성에 비해 부극성의 방전펄스 수가 약 20% 많게 나타났다. 또한 TDR 방법으로 결함위치를 산출하였으며, 50m 케이블에서 1m 이내로 결함의 위치를 추정할 수 있었다.

국방 EMP 방호능력의 효율적 개선을 위한 방안 연구 (A Study for the Efficient Improvement Measures of Military EMP Protection Ability)

  • 정승훈;안재춘;황영규;정현주;신용태
    • 예술인문사회 융합 멀티미디어 논문지
    • /
    • 제7권1호
    • /
    • pp.219-227
    • /
    • 2017
  • 현재 군 지휘정보체계는 반도체칩이 장착된 전자기기의 활용도가 높으며, 최신 정보통신기술 발전에 따라 그 비중은 더욱 증가할 것으로 예상된다. 전기를 사용하는 전자기기의 경우 고출력 전기신호에 대한 일정한 내성을 보유하고 있다. 이러한 전자기기 내성을 기준화 한 것이 EMC 규격이다. 한편 원자력 연구원에서는 서울 상공 100km지점에서 10kt급의 핵폭발이 발생할 경우 반경 170km 지역까지 고출력전자기파가 발생하여 해당지역 대부분 전자장비에 피해가 예상된다는 시뮬레이션 결과를 발표한 바 있다. 이러한 경우 발생하는 영향을 방호하기 위한 기준은 EMP 방호 규격으로 정의된다. 대부분의 상용 전자기기의 경우 EMC 기준은 충족하지만 EMP 기준을 충족하는지의 여부를 확인할 수가 없다. EMP 방호기준 충족여부를 확인하기 위한 장비와 절차가 쉽지 않고 비용적인 측면이 있기 때문이다. 보통 부득이한 경우를 제외하고는 EMP 방호기준 충족여부에 대해서는 검증하지 않는 실정이다. 이점을 고려하여 본 연구에서는 EMC-EMP 상관관계 분석을 통하여 일반 전자기기의 EMP 방호능력에 대해서 확인하고 이를 바탕으로 EMP 방호능력 향상방안을 확인하였다.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF