• 한국항공우주학회지
• /
• 제31권4호
• /
• pp.82-91
• /
• 2003

이중 충돌형(unlike doublet impinging) 분사기의 직경변화에 따른 혼합특성을 모사 추진제에 의한 실험적인 방법으로 연구하였다. 분사유동은 레이놀즈수 2,500부터 12,000 사이의 난류제트를 사용하였으며, 분사공 직경 비를 1부터 1.5까지 확대시켜 직경변화에 따른 혼합특성을 고찰하였다. 분사공의 형상변수는 최적의 혼합특성을 갖는 설계치로 고정하였으며, 대기압 하의 분사유동장의 공기역학적 영향은 배제하였다. 매개변수로서 운동량비를 사용하여 혼합효율의 변화(mixing doublet impinging)를 고찰하였으며, 패터네이터(patternater)를 사용하여, 연료와 산화제의 국소 질량분포 측정 및 혼합비 분포를 측정하였다. 운동량비와 혼합효율의 상관성을 침투정도로 고려하여 연료와 산화제의 속도비와 혼합효율의 상관성을 고찰하였다. 분사공 직경이 증가됨에 따라 최대 혼합효율점이 운동량비가 증가되는 방향으로 이동함을 보였으며, 연료와 산화제의 속도 비 0.65~0.7영역에서 분사공 직경변화와 무관하게 혼합효율이 최대가 되었다. 또한 혼합효율은 추진제의 분사 충돌 시 상대제트의 침투 깊이 정도에 따라 큰 영향을 받는 것으로 나타났다.

• Journal of Power Electronics
• /
• 제6권4호
• /
• pp.340-346
• /
• 2006

A high efficiency drive technique for synchronous reluctance motors (SynRM) using a neural network (NN) is presented in this paper. High efficiency drive condition depends on the mathematical model of SynRM. A NN is employed as an adaptive model of SynRM. The proposed high efficiency drive technique does not require an accurate mathematical model of SynRM. Moreover, the proposed method shows robustness against machine parameter variations because the training algorithm of the NN is executed on-line. The usefulness of the proposed method is confirmed through experimentation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.146-154
• /
• 2001

In almost all real situations, there will be a radiant interchange between adjacent fins with the base surface as well as with the external environment. In the problem of this study, a rectangular fin is attached to a based. Our concern is whether the convective fin efficiency can be increased by the radiation heat exchanged between the fin and the base surface and how much. If the fin temperature toward the tip increased by the effect of radiation, the convective heat transfer increase due to the temperature difference between the ambient temperature and the surface temperature of the fin. If this true, the efficiency of the fin due to the radiation will increase. Attention is directed toward several parameters which have major roles on getting values of the fin efficiencies in several different values of parameters. Many different cases are, therefore, to be examined to have maximum fin efficiency by varying the values of each parameter.

• Journal of Korean Society for Atmospheric Environment
• /
• 제18권E1호
• /
• pp.13-20
• /
• 2002

The electrical and chemical properties of the dielectric barrier discharge (DBD) process for the benzene removal were investigated. The benzene removal was initiated with the applied voltage higher than the discharge onset value. The removal efficiency over 95 % was obtained at approximately 1.6 kJ lite $r^{r-1}$ of the electrical energy density. The increase of the inlet concentration decreased the removal efficiency. However, the benzene decomposition rate increased with the inlet concentration . While the increase of the gas retention time enhanced the removal efficiency, the decomposition rate decreased. Identification of the optimum condition between the decomposition rate and the removal efficiency is required for field applications of the DBD process.s.

• 반도체디스플레이기술학회지
• /
• 제12권1호
• /
• pp.35-39
• /
• 2013

H.264/AVC is an authoritative international video coding standard which shows code and efficiency more improved than the existing video standards. Above all, the parameter block mode of H.264/AVC significantly contributes much to high compression efficiency. However, as the occasion demands, users tend to pass while overlooking the part that can produce a little higher compression efficiency. We, taking notice of this point, are designed to bring in much higher compression efficiency by gathering up the overlooked parts. This paper suggests the algorithm that produces efficient performance improvement by using the histogram of luminance in the pixel unit (Macroblock) of respective prediction block and applying specific thresholds. The experimental results proves that the technique proposed by this paper increases the compression efficiency of the existing H.264/AVC algorithm by 0.4% without any increase in the whole encoding time and PSNR complexity.

• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.122-128
• /
• 2003

This paper presents a thermodynamic analysis of heat pump system using water as a heat source and heat sink. The primary object in this study is the optimization of exergetic efficiency. Two different systems, 2-stream and 1-stream system, are analyzed in detail. Mass flow ratio (the ratio of mass flow rate of water through evaporator to that through condenser) is identified as the most important parameter to be optimized. It is shown that there exists an optimum mass flow ratio to maximize exergetic efficiency. The variation of optimum exergetic efficiency of 2-stream system is quite small and the value lies between 0.2∼0.23 for the range of investigation in this study. However, far better performance can be obtained from 1-stream system. This means considerable irreversibilities are generated through condenser of the 2-stream system. The effects of adiabatic efficiency of compressor-motor unit on the overall system performance are also examined in the analysis.

• Journal of Korean Society for Atmospheric Environment
• /
• 제23권E1호
• /
• pp.29-38
• /
• 2007

A cylindrical tube connection that has a voltage difference and is separated electrically by an insulator was modelled. The penetration efficiencies of charged particles passing through the connector tube were investigated. Typically, as the particle size decreases and the applied voltage difference increases, the penetration efficiency decreases. To assess the effect of the electrode geometry, various lengths of electric insulator and aerosol flow rate with a fixed tube length and tube diameter were used when calculating penetration efficiencies. The comparison of penetration efficiencies for various electrode geometry setups suggests that the penetration efficiency can be described as a function of the product of applied voltage and electrical mobility of charged particles. The diffusion loss from this and previous studies are compared. Further, an explicit form for penetration efficiency is provided as a function of a new non-dimensional parameter, $Es(=Z_pV/U_{avg}W);\;P_{es}=0.2{\cdot}{\exp}(-Es/0.6342)+0.8{\cdot}{\exp}(-Es/4.7914)$.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권10호
• /
• pp.570-576
• /
• 2000

The discharge and the collection efficiency characteristics of an electrostatic precipitator have been studied under various operating conditions. The specific resistivity of pulverized coal dust was about 1013∼1014[${\Omega}{\cdot}cm$] and reached the maximum value of 6${\times}$1013[${\Omega}{\cdot}cm$] at 150[$^{\circ}C$]. Back corona has been occurred as dust contents and gas temperature increase. In the case of back corona occurrence, collection effciency decreased rapidly. This problem has been solved by increasing moisture contents. Experimental results showed that collection efficiency of the full wave voltage was higher than that of the pulse wave voltage. The modification parameter k of the collection efficiency equation was about 0.42.

• 청정기술
• /
• 제13권2호
• /
• pp.143-150
• /
• 2007

본 연구에서는 플러스, 솔더, 그리스와 같은 오염물질을 효과적으로 세정하기 위하여 글리콜 에테르계, 파라핀계 및 실록산계 물질을 배합한 탄화수소계 세정제를 제조하고 습윤지수, 아닐린점 그리고 용해도 매개변수 등의 세정성능에 대한 영향을 조사하였다. 탄화수소계 세정제의 배합은 단일물질의 물성에 기초하여 제조되었다. 제조된 세정제의 습윤지수와 아닐린 점은 실험을 통하여 측정하였으며 용해도 매개변수는 Hansen의 추정식을 사용하여 계산하였다. 본 연구에서는 플럭스, 솔더, 그리스의 오염물을 사용하여 세정제의 세정성능 평가를 진행하였다. 실험결과 배합 세정제의 세정성능이 플럭스, 솔더, 그리스의 오염물 세정에 매우 우수하게 나타났으며 오염물에 따라 세정효율에 영향을 미치는 변수가 다르게 나타났다. 플럭스 세정에서는 플럭스($21.3MPa^{1/2}$)와 유사한 용해도 매개변수의 MC($20.3MPa^{1/2}$), DF-1($24.2MPa^{1/2}$), DF-2($21.5MPa^{1/2}$)세정제가 3분 이내에 100%의 세정효율을 보였다. 그리고 솔더 세정에서는 -$20^{\circ}C$ 이하의 아닐린점인 CFC-113, MC, 1,1,1-TCE가 높은 세정효율을 보였다. 그리스 세정에서는 그리스의 용해도 매개변수($15.0{\sim}17.0\;MPa^{1/2}$)와 가장 유사한 DG-1 세정제($16.2\;MPa^{1/2}$)와 DG-2 세정제($15.5\;MPa^{1/2}$)의 세정효율이 비교적 저조하였고 습윤지수가 크고 아닐린 점이 낮은 CFC-113과 MC가 세정효율이 우수하였다. 본 연구를 통해 플럭스, 솔더, 그리스의 오염물을 세정하기 위해 글리콜 에테르계, 파라핀계 및 실록산계 물질을 알맞게 배합하여 CFC-113, MC, 1,1,1-TCE와 같은 규제물질을 대체할 수 있는 탄화수소계 세정제를 개발할 수 있었다. 그리고 습유지수, 아닐린점, 용해도 매개변수 등과 같은 세정성 영향을 검토하여 비수계 세정제의 세정성능을 예측하고 세정제의 배합에 적용할 수 있었다.

• Journal of the Korean Data and Information Science Society
• /
• 제14권2호
• /
• pp.153-165
• /
• 2003

This paper considers the likelihood ratio test statistic based on nonlinear regression quantiles estimators in order to test of hypothesis about the regression parameter $\theta_o$ and derives asymptotic distribution of proposed test statistic under the null hypothesis and a sequence of local alternative hypothesis. The paper also investigates asymptotic relative efficiency of the proposed test to the test based on the least squares estimators or the least absolute deviation estimators and gives some examples to illustrate the application of the main result.