• Journal of the Korean Society of Safety
• /
• v.21 no.6 s.78
• /
• pp.14-19
• /
• 2006

This study performed burst tests using real-scale pipe elbow containing simulated local wall-thinning to evaluate the effects of circumferential thinning angle and bending load on the failure pressure of wall-thinned elbow. The tests were carried out under the loading conditions of internal pressure and combined internal pressure and bending loads. Three circumferential thinning angles, ${\theta}/{\Pi}=0.125,\;0.25,\;0.5$, and different thinning locations, intrados and extrados, were considered. The test results showed that the failure pressure of wall-thinned elbow decreased with increasing circumferential thinning angle for both thinning locations. This tendency is different from that observed in the wall-thinned straight pipe. Also, the failure pressure of intrados wall-thinned elbow was higher than that of extrados wall-thinned elbow with the same thinning depth and equivalent thinning length. In addition, the effect of bending moment on the failure pressure was not obvious.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.385-392
• /
• 2014

The purpose of this study was to determine the effects of plantation thinning on physical and mechanical properties of Larix kaempferi. Tree samples were obtained from unthinned, moderately, heavily thinned plantations where located in Kwangryung forest research stand. The effects of different thinning methods on the bending and parallel to grain compressive strengths of Larix kaempferi were explored. Average latewood ratio with various thinning treatments revealed the trend of unthinning < moderate thinning < heavy thinning treatment. Average annual ring width with various thinning treatments showed the trend of unthinning < moderate thinning or heavy thinning treatment. Average bending and parallel to grain compressive strengths with various thinning treatments revealed the trend of unthinning > moderate thinning > heavy thinning treatment. This indicates that thinning treatment reduces average bending and parallel to grain compressive strength properties.

• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.28-34
• /
• 2003

In the present study, three-dimensional finite element analysis was performed to investigate the effects of internal wall thinning defect on the failure pressure of elbow in the piping system and to develop the failure pressure evaluation model. From the results of finite element analysis, the failure pressure was derived by employing local stress criteria, and the effects of thinning location, bend radius, and defect geometry on the failure pressure of internally wall thinned elbow were investigated. Also, based on these investigations and previous model developed to estimate the failure pressure of elbow with an external pitting defect, the failure pressure evaluation model to be applicable to the elbow containing an internal thinning defect was proposed and compared with the results of finite element analysis. The failure pressure calculated by the model agreed well with the results of finite element analysis.

• Korean Journal of Agricultural Science
• /
• v.27 no.1
• /
• pp.5-12
• /
• 2000

The main purpose of this study is to obtain spatial image information toward forest thinning process in Larix forest stands. Thirteen different alternatives were simulated to visualize on the basis of actual thinning work photos. The options were illustrated as photos produced by photoshop program. Each alternatives were evaluated by forest visitor group with total 244 respondents after reliability test. Spatial images of 13 thinning photos were measured by 12 semantic differential scale as broad -narrow, ordered-tangled, friendly-unfriendly, monotonous-divers, dry-refreshing, relieved -stifling, healthy-sickly, uniform-scattered, dead-alive, opened-closed, bent-straight, and beautiful-ugly. In comparison with thinning stands and natural stands, thinning works were visual improvement effects of spatial images. Seemingly, this trend is due to definite form beauty, straight and clear length form of coniferous forest, As can be expected, slash and downwood were negatively related to improvement effects of spatial images. The 60% ratio of stem/ tree height and 450-950 trees/ha was positive in attraction of spatial images. Results indicate how to conduct forest thinning system for spatial images on Larix forest stands.

• Archives of Plastic Surgery
• /
• v.45 no.4
• /
• pp.298-303
• /
• 2018

Flap thinning is a procedure for making a thick flap thinner. This procedure does more than simply fill in the defected area, and it is better for reconstructing the area both functionally and aesthetically. However, because flap thinning is a rather blind procedure, it may have harmful effects on flap vascularity. Therefore, the vasculature of a flap must be understood before performing flap thinning. This paper analyzes the basic anatomy underlying flap thinning based on the previous anatomic study that categorized flaps into 6 types by their vascular structures. This paper also reviews specific studies of frequently practiced flap procedures (deep inferior epigastric artery perforator flap, thoracodorsal artery perforator flap, and anterolateral thigh flap) and presents important precautions for flap thinning procedures. Finally, this paper briefly examines the axiality of the subdermal plexus, which needs to be taken into account when performing flap thinning.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.165-171
• /
• 2011

This study was conducted to investigate the effect on pine wilt disease by health-thinning, thinning and sapling tending in red pine forest (Pinus densiflora). As a part of developing forestry control methods for pine wilt disease control. In case of putting in pine sawyer (Monochamus alternatus) with pine wood nematode (Bursaphelenchus xylophilus), the specimen trees in health-thinning, thinning and control treatment were withered more than 50%, although there were not statistically significant differences in treatments. In treatment site, thinning slashes had influenced on the spread of pine wilt disease (experiment 1). In thinning stand of sapling pine, site with thinning slashes had highest mortality (> 90%). There were approximately 10% mortality in the site of carried thinning slashes from case and the site of non-thinning with released M. alternatus (experiment 2). The larvae had not appeared in young tree stump with health-thinning and thinning at April, the current emergence year of M. alternatus, but there were larvae in sapling tree stump with thinning at May, the current emergence year of M. alternatus. In case of stands with infected young and sapling tree by pine wilt disease, there is no effects of on pine wilt disease control by health-thinning, thinning, saplings tending at April and May, the current emergence year of M. alternatus, and leaved thinning slashes had influenced on the spread of pine wilt disease as habitation of M. alternatus.

• Journal of Forest and Environmental Science
• /
• v.36 no.1
• /
• pp.17-24
• /
• 2020

This study aimed to figure out and compare the increment of biomass by thinning intensity focused on the plantation of the two major coniferous species (Larix kaempferi and Pinus koraiensis) of South Korea. The inventory interval was three years under the effects of three types of thinning treatments; control (no thinning), light (20% thinning) and heavy (40% thinning). The results showed standing biomass increment of both species decreased as thinning intensity increased (heavylight>control). Meanwhile, the lowest of on-site biomass changes occurred in the control plot, and the greatest was in the heavy thinning plot because thinning was involved with leaving the felling residual biomass (leaves, branches and roots) on the site. According to the results from this short-term study, unthinned stands is preferable for maximizing standing biomass as well as carbon sequestration. However long-term investigation should be considered in order to see more clear results.

• Journal of Forest and Environmental Science
• /
• v.38 no.1
• /
• pp.48-54
• /
• 2022

This study was conducted to examine litter inputs and litter decomposition rates following thinning, which is among the most important forest management activities that enhance the beneficial functions in Korean forests. Litter inputs and litter decomposition rates following a 2-year elapse from thinning in Pinus densiflora and following a 7-year elapse from thinning in Quercus variabilis stands were measured for 2 years from 16 sites in three regions (Sancheong-gun, Uiryeong-gun, and Jinju-si) in Gyeongsangnam-do, Korea. Annual needle litter inputs in P. densiflora stands were significantly decreased following thinning, whereas annual broadleaved leaf litter inputs in Q. variabilis stands were not significantly different between thinned and unthinned treatments. The annual mean total litter inputs in both tree species were significantly lower in the thinned (P. densiflora: 3,653 kg ha^-1 year^-1; Q. variabilis: 4,963 kg ha^-1 year^-1) compared to the unthinned stands (P. densiflora: 5,138 kg ha^-1 year^-1; Q. variabilis: 5,997 kg ha^-1 year^-1) during the study period. The mass loss rates from decomposing needle litter in P. densiflora stands were significantly lower (p<0.05) in the thinned stands than in the unthinned stands for two sampling dates of the eight included in the study, whereas the decomposition rates from decomposing leaf litter in Q. variabilis stands were not affected by thinning. The results indicate that thinning effects on total litter inputs remained clear following a 2-year elapse from thinning in P. densiflora stands and following a 7-year elapse from thinning in Q. variabilis stands.

• Journal of Magnetics
• /
• v.17 no.4
• /
• pp.298-301
• /
• 2012

In order to know the effect of surface irregularity in the detection of local wall thinning of pipeline using pulsed eddy current (PEC), the lift-off effects on PEC signal have been investigated. Three kinds of parameters in the PEC signal, which is "peak amplitude", "time to peak amplitude" and "time to zero crossing" are analyzed to separate the lift-off effects in the PEC signal. The distance from sensor to the bottom of sample which is the total thickness of combined insulator and sample is kept constant. The magnitude of the differential peak amplitude is increased with increasing sample thickness, the time to peak amplitude is increased with increasing the sample thickness. To determine the effect of lift-off, a number of balanced transient responses combining wall thinning locations and lift-off distances were plotted.

• Korean journal of applied entomology
• /
• v.49 no.3
• /
• pp.187-198
• /
• 2010

Thinning treatment has a huge effect on understory and litter structures in forest ecosystem, and the resulting changes may impact some arthropod groups such as plant-feeders and detritivores. This study was carried out to find a change in arthropod abundance and their structures in relation to the thinning activity in a Pinus koraiensis plantation in Chuncheon, Korea, where thinning was conducted twice: in 1998-2000 (old-thinning) and 2007 (new-thinning). Arthropods were collected using pitfall traps in 2006 and 2008. Effects of old-thinning on change of abundance and community structure of arthropod were significant, but the effects of new-thinning were not significant. The most significant thinning effect was found in detritivores, followed by plant feeders, but the effect was hardly significant in predators. Among detritivores the changes in abundance was diverse. The abundance of orthopteran plant-feeder increased, but Curculionidae declined after thinning. There was not different in abundance of total arthropods between thinned and unthinned areas because the difference may have cancelled each other out by increased or decreased abundance of taxa. Community structures of arthropods were most greatly affected by years, followed by the old-thinning, but the new-thinning did not affect community structures.