• 한국항공우주학회지
• /
• 제46권7호
• /
• pp.575-582
• /
• 2018

우주용 냉각기는 관측위성의 적외선 검출기 초점면부의 극저온 냉각을 위해 적용되며, 궤도운용 시 단일 주파수 형태의 미소진동을 발생한다. 상기 미소진동은 관측위성의 영상품질을 저하시키는 주된 요인이며, 이에 따라 미소진동 절연이 요구된다. 본 연구에서는 상기 우주용 냉각기의 미소진동 절연을 목적으로 별도의 발사구속장치 적용 없이도 발사진동 및 궤도 미소진동환경에 동시적용 가능한 적층형 블레이드 진동절연기를 제안하였다. 본 진동절연기에 적용된 블레이드는 얇은 금속 박판을 다층으로 적층하고 각 층 상호면에 점탄성 특성 부여가 가능한 테이프를 적용하여 발사환경에서의 피로 내구성 향상 및 고댐핑 특성 부여를 목적하였다. 제안된 진동절연기의 기본특성 확인을 위해 자유감쇠 시험을 실시하였으며, 인증수준에서의 발사진동 시험을 통해 설계유효성을 입증하였다.

• 한국정보통신학회논문지
• /
• 제21권12호
• /
• pp.2221-2231
• /
• 2017

본 논문에서는 원전용 계측 제어기기를 진단하고 유지 보수하기 위한 무선통신기술의 국내외 적용 사례, 프로토콜(Wi-Fi, Zigbee, Z-wave, WirelessHart 등) 및 그에 따른 전파특성을 조사하였다. 또한, 원전 내 무선통신기술 적용시 우려되는 전자파 간섭(EMI/RFI)과 관련하여 국내 규제지침 KINS/RG-N03.09(개정 2판)에서 승인한 RG. 1.180(Regulatory Guide 1.180 rev.1), MIL-STD 461E, 및 IEC 61000-4의 차이를 분석하였다. 추가적으로 기존의 EMC 관련 규제에 포함되어 있지 않았던, 실내 환경에서의 구조적 특징, 전파산란 및 차폐효과, 실내 감쇄모델을 고려한 전자파 영향성 평가요소에 대해서도 연구하였다.

• 한국동물위생학회지
• /
• 제30권2호
• /
• pp.191-196
• /
• 2007

The slaughter process for cattle will inevitably transfer some bacteria onto the carcasses. The goal of food safety programs is to minimize and effectively remove this contamination. This study was attempted by the Verif $EYE^{TM}$ machine-vision technology that might be useful for reducing microbial indicator counts and could reduce the contamination chance of E coli O157:H7 and Salmonella spp on beef carcasses. For the evaluation of the effectiveness of the Verif $EYE^{TM}$ technology, 80 samples were examined by the inspection device over 15 days. On an examination of FDS-positive samples compared to negative controls from the same carcasses, aerobic plate counts were bigger than the negative control samples (5.26 vs 4.60 log). Enterobacteriaceae counts were greater on the positive samples than the corresponding negative control samples (2.07 vs 1.17log). There was a consistent correlation between samples detected by the Verif $EYE^{TM}$ system with detectable counts. For example, 100% of positive samples had detectable APC and 91.2% of positive samples had detectable TCC. Therefore, if areas detected as positive for contamination by the Verif $EYE^{TM}$ system were removed from the carcasses, significant sources of microbial contamination will be reduced for objective compliance with HACCP. This results suggest that the use of Verif $EYE^{TM}$ machine-vision technology might be useful for reducing microbial indicator counts (APC, TCC) and could help reduce the risk of presence of E coJi O157:H7 and Salmonella spp on Beef carcasses.

• Earthquakes and Structures
• /
• 제14권5호
• /
• pp.389-398
• /
• 2018

The seismic isolation system makes a structure isolated from ground motions to protect the structure from seismic events. Seismic isolation techniques have been implemented in full-scale buildings and bridges because of their simplicity, economic effectiveness, inherent stability and reliability. As for the responses of an isolated structure due to seismic events, it is well known that the most uncertain aspects are the seismic loading itself and structural properties. Due to the randomness of earthquakes and uncertainty of structures, seismic response distributions of an isolated structure are needed when evaluating the seismic fragility assessment (or probabilistic seismic safety assessment) of an isolated structure. Seismic response time histories are useful and often essential elements in its design or evaluation stage. Thus, a large number of non-linear dynamic analyses should be performed to evaluate the seismic performance of an isolated structure. However, it is a monumental task to gather the design or evaluation information of the isolated structure from too many seismic analyses, which is impractical. In this paper, a new methodology that can evaluate the seismic fragility assessment of an isolated structure is proposed by using stochastic response database, which is a device that can estimate the seismic response distributions of an isolated structure without any seismic response analyses. The seismic fragility assessment of the isolated nuclear power plant is performed using the proposed methodology. The proposed methodology is able to evaluate the seismic performance of isolated structures effectively and reduce the computational efforts tremendously.

• Smart Structures and Systems
• /
• 제29권4호
• /
• pp.589-598
• /
• 2022

Timber structures are susceptible to structural damages caused by variations in moisture content (MC), inducing severe durability deterioration and safety issues. Therefore, it is of great significance to detect MC levels in timber structures. Compared to current methods for timber MC detection, which are time-consuming and require bulky equipment deployment, Lead Zirconate Titanate (PZT)-enabled stress wave sensing combined with statistic machine learning classification proposed in this paper show the advantage of the portable device and ease of operation. First, stress wave signals from different MC cases are excited and received by PZT sensors through active sensing. Subsequently, two non-baseline features are extracted from these stress wave signals. Finally, these features are fed to a statistic machine learning classifier (i.e., naïve Bayesian classification) to achieve MC detection of timber structures. Numerical simulations validate the feasibility of PZT-enabled sensing to perceive MC variations. Tests referring to five MC cases are conducted to verify the effectiveness of the proposed method. Results present high accuracy for timber MC detection, showing a great potential to conduct rapid and long-term monitoring of the MC level of timber structures in future field applications.

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.17-23
• /
• 2013

The BESS(Battery Energy Storage System) is an useful device for load leveling, but the high cost, installation space and safety issues are the main barriers for supplying it widely. The important factor in supplying BESS to customers successfully is the payback period. As most of the H/W cost factors are uncontrollable, the optimization of storage volume can be useful factor in improving payback period. In order to obtain optimized BESS volume, the load factor, demand ratio, peak shaving ratio, electric rates and benefits from DR participation of customer should be analyzed. In this paper, we could verify the peak cutting capability and cost effectiveness under the some proposed conditions and changing value of PCS and battery based on the customers data after volume optimization process was applied, and we can identified the saturation point of load factor and shortening of customer's payback period.

• 대한인간공학회지
• /
• 제28권3호
• /
• pp.49-54
• /
• 2009

Visual occlusion method is a visual demand measuring technique which uses periodic vision/occlusion cycle to simulate driving environment. It became one of the most popular techniques for the evaluation of in-vehicle interfaces due to its robustness and cost-effectiveness. However, it has a limitation in that the vision/occlusion cycle forces the user to use the IVIS at a predetermined pace, while a driver decides when to use the device on his/her own in actual driving. This paper proposes a user-driven visual occlusion method for measuring the visual demand of in-vehicle interfaces. An experiment was conducted to examine the visual demand of an in-vehicle interface prototype using both the existing (system-driven) occlusion method and the proposed (user-driven) one. Two in-vehicle tasks were evaluated: address input and radio tuning. The results showed that, for the radio tuning task, there were significant differences in total shutter open time and resumability ratio between the methods. The user-driven visual occlusion method not only allows a better representation of drivers' behavior, but it also seems to provide more information on the chunkability of a task.

• Journal of Oral Medicine and Pain
• /
• 제39권2호
• /
• pp.35-45
• /
• 2014

Many therapeutic modalities including continuous positive airway pressure, surgery, and oral appliances are used to treat patients with sleep-disordered breathing. However, there are no definitive treatment modalities for individual patients due to various causes of sleep-disordered breathing. Clinicians should have select best options for individual patients and it is quite challenging process. Oral appliances attracted clinical attention for its convenience and safety. Several designs of oral appliances are introduces such as soft palate lifter, tongue retaining device, and various appliances which aimed to mandibular advancement. Among these oral appliances, mandibular advancement devices (MADs) are considered the most excellent based on their effectiveness and patient tolerance. Although MADs are not guarantee dramatic outcome and less consistent than continuous positive airway pressure, they offer several advantages over continuous positive airway pressure and surgical methods, including non-invasiveness, silence, portability, and tolerability, simplicity. Therefore, general dental practitioner who had passed sleep dental curriculum or coursework can treat the patients with sleep problems. This article reviews the history, clinical indications, suggested mechanism of actions, various positive effects and several side effects, factors predicting a favorable outcome, determining amounts of mandibular advancement, compliance and long-term efficacy of MADs use.

• 한국화재소방학회논문지
• /
• 제15권4호
• /
• pp.49-56
• /
• 2001

화재시 특별피난계단의 부속실의 연기침입을 방지하기 위해 적용하고 있는 급기가압방연시스템의 효능에 대한 논란이 증가하고 있는 바, 국내 고층 건축물의 특별피난계단에 설치운용중인 급기가압시스템의 설계시 핵심요소인 가압공간의 누설틈새, 계단실과 부속실 또는 부속실과 거실공간사이의 출입문을 통한 방연풍속과 출입문의 자동폐쇄를 보장하는 도어 개폐장치등에 대한 문제점을 조사연구하여 실질적인 효과를 보장할 수 있는 기준을 설정하고, 안전성확보를 보장하면서 경제성을 고려한 설계안을 세부적인 사례를 들어 구체적으로 제시하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권9호
• /
• pp.351-358
• /
• 2006

In this paper, DSPOCS(Digital Switchgear-Panel Operation and Control Solution) is designed, which is the intelligent inference based operation and control solution to obtain the safety and reliability of electric power supply in substation based on IED. DSPOCS is designed as a scheduled monitoring and control task and a real-time alarm inference task, and is interlinked with BRES(Bus Reconfiguration Expert System) in the required case. The intelligent alarm inference task consists of the alarm knowledge generation part and the real-time pattern matching part. The alarm knowledge generation part generates automatically alarm knowledge from DB saves it in alarm knowledge base. On the other hand, the pattern matching part inferences the real-time event by comparing the real-time event information furnished from IEDs of substation with the patterns of the saved alarm knowledge base.; Especially, alarm knowledge base includes the knowledge patterns related with fault alarm, the overload alarm and the diagnosis alarm. In order to design the database independently in substation structure, busbar is represented as a connectivity node which makes the more generalized graph theory possible. Finally, DSPOCS is implemented in MS Visual $C^{++}$, MFC, the effectiveness and accuracy of the design is verified by simulation study to the typical distribution substation.