• 한국재료학회지
• /
• 제29권9호
• /
• pp.547-552
• /
• 2019

In the present study, the thermal conductivity of a silicon nitride($Si_3N_4$) thin-film is evaluated using the dual-wavelength pump-probe technique. A 100-nm thick $Si_3N_4$ film is deposited on a silicon (100) wafer using the radio frequency plasma enhanced chemical vapor deposition technique and film structural characteristics are observed using the X-ray reflectivity technique. The film's thermal conductivity is measured using a pump-probe setup powered by a femtosecond laser system of which pump-beam wavelength is frequency-doubled using a beta barium borate crystal. A multilayer transient heat conduction equation is numerically solved to quantify the film property. A finite difference method based on the Crank-Nicolson scheme is employed for the computation so that the experimental data can be curve-fitted. Results show that the thermal conductivity value of the film is lower than that of its bulk status by an order of magnitude. This investigation offers an effective way to evaluate thermophysical properties of nanoscale ceramic and dielectric materials with high temporal and spatial resolutions.

• 한국식품과학회지
• /
• 제26권1호
• /
• pp.1-5
• /
• 1994

쌀전분의 열전도도를 probe method로 측정하였다. 수분함량이 0에서 28.2%로 증가함에 따라 열전도는 약 $0.065{\sim}0.09W/mK$에서 $0.13{\sim}0.23W/mK$로 약 $2{\sim}2.5$배의 큰 증가를 보였다. 밀도가 일정할 때 온도가 $25^{\circ}C$에서 $70^{\circ}C$로 증가함에 따른 열전도는 수분함량이 증가할수록 뚜렷하게 증가하였다. DSC의 측정결과 수분함량 7.2% 이하인 경우는 endothermic peak가 전혀 보이지 않았으며, 그 이상의 수분함량$(7.2{\sim}33.6%)$에서도 매우 완만한 peak를 보여 주었다. 따라서 열전도도에 대한 수분함량-온도의 교호작용은 전분의 호화에 의한 간접적인 영향이라기 보다는 물의 열전도도의 온도의존성에 기인하는 것으로 추측된다. 쌀전분의 열전도도(Ke)는 수분함량 $(M.C.,\;0{\sim}28.2%)$, 충진밀도$(P_{b},\;650{\sim}800\;kg/m^{3})$ 및 온도$(T,\;25{\sim}70^{\circ}C)$와 Ke=-0.111+0.000203 T+0.00173 M.C.+0.000247 $P_{b}+0.000035$ M.C. T의 관계식을 얻어졌다.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.418-425
• /
• 2011

In this study, a high energy ball milling process was introduced in order to improve the densification of direct nitrided AlN powder. The sintering behavior and thermal conductivity of the AlN milled powder was investigated. The mixture of AlN powder and 5 wt% $Y_2O_3$ as a sintering additive was pulverized and dispersed by a bead mill with very small $ZrO_2$ bead media. The milled powders were sintered at $1700^{\circ}C-1800^{\circ}C$ for 4 h under $N_2$ atmosphere. The results showed that the sintered density was enhanced with increasing milling time due to the particle refinement as well as the increase in oxygen contents. Appropriate milling time was effective for the improvement of thermal conductivity, but the extensive millied powder formed more fractions of secondary phase during sintering, resulted in the decrease in thermal conductivity. The AlN powder milled for 10min after sintering at $1800^{\circ}C$ revealed the highest thermal conductivity, of 164W/$m{\cdot}K$ in tne densified AlN sintered at $1800^{\circ}C$.

• Composites Research
• /
• 제34권1호
• /
• pp.63-69
• /
• 2021

일체형 방열 및 기체 차단 재료 개발을 위하여 신규 고분자를 합성하고 판상형 육방정 질화 붕소(hBN) 필러를 포함하는 복합소재를 제조하였다. 복합소재는 필러의 크기 및 함량에 따라 열전도도 및 산소투과도 조절이 가능하였다. 복합소재는 최대 28.0 W·m-1·K-1의 높은 열전도도를 지녔으며 필러 미포함 샘플 대비 산소투과도는 62% 감소하였다. 열전도도 및 기체투과도 실험 측정값과 모델 예측값 비교를 통해 복합소재 내 필러의 종횡비를 계산하였다. 이러한 결과를 토대로 높은 열전도도 및 낮은 기체투과도는 필러 간 효과적인 네트워크 형성 때문이며 이는 복합소재 제조 시 전단 응력 극대화가 가능한 신규 수지의 특성으로부터 유래된것으로 사료된다. 또한, 열전도도로부터 계산된 필러 종횡비와 산소 투과도로부터 계산된 필러 종횡비 값이 서로 다름을 확인하였고 이에 관련하여 복합소재에서 열 전달 및 기체 투과 메커니즘에 대하여 고찰하였다. 본 연구에서 개발된 높은 열전도도 및 낮은 산소투과도를 갖는 고분자 복합소재는 전자 제품의 일체형 방열 및 산화 방지 재료로 사용 될 수 있다.

• 한국태양에너지학회 논문집
• /
• 제29권5호
• /
• pp.20-27
• /
• 2009

The effect of borehole thermal resistance on the borehole length is studied. In performing this work a new concept BLRR(borehole length reduction rate) is developed based on the line source model. The solution of line source model is shown to be valid through the comparison with the data of thermal response test. It is shown that BLRR is a function of soil thermal conductivity(k) and borehole thermal resistance($R_b$). The value of BLRR increases with increasing k, which means reducing $R_b$ is more effective when k is high. The reduction of borehole length with change of $R_b$ is easily estimated with BLRR. The validity of BLRR is also examined with EED analysis.

• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.2618-2623
• /
• 2013

일정하지 않은 장단비의 코팅된 충전재가 한 방향으로 정렬된 복합재의 등가열전도계수를 쉽게 예측할 수 있는 하이브리드모델을 제시한다. 코팅된 충전재의 등가열전도계수를 일반화된 자기일치모델로 계산하고, 원래 복합재를 모재와 이 값을 갖는 단섬유로 단순화한 후 수정된 에쉘비 모델을 적용한다. 일정한 장단비의 코팅된 단섬유가 한 방향으로 정렬된 복합재에 대해 일반화된 자기일치모델과 수정된 에쉘비모델의 예측결과를 하이브리드모델과 비교한다. 마지막으로 장단비 2와 10인 코팅된 단섬유가 한 방향으로 배치된 복합재의 등가열전도계수를 하이브리드모델로 쉽게 계산할 수 있음을 보여준다.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.448-453
• /
• 2018

PV module protective film plays an important role in protecting the solar cell from external environment by anti-hydrolysis polyester, UV resistance and mechanical properties. The backsheet was manufactured by using Roll-to-Roll dry laminating process. The backsheet structure is composed of 3 layers, which are PE, PET, and Fluorine polymer films. In this study, we have experimented the variation of thermal conductivities depending on MgO inputs 10% to 25% in order to confirm the dependence of the module efficiencies. High thermal conductive backsheet can increase the module output power efficiency because the heat is dissipated by spreading out the internal heat. Long-term environment weatherability tests were conducted for confirming 25 year reliability in the field such as PCT, UV, and power efficiency degradations. As the evaluation result, high thermal conductivity can be effective for increase of power efficiency of solar panel by using thermal conductive MgO masterbatch.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.6.2-6.2
• /
• 2005

• 설비공학논문집
• /
• 제23권7호
• /
• pp.528-534
• /
• 2011

In this paper, thermal characteristics of cylindrical grooved wick heat pipes with water-based MWCNT nanofluids as working medium are experimentally investigated. Volume fractions of nanoparticles are varied with 0.1% to 0.5%. Transient hot wire method developed in house is used to measure the thermal conductivity of nanofluids. It is enhanced by up to 29% compared to that of DI water. The thermal resistances and temperature distributions at the surface of the heat pipes are measured at the same evaporation temperature. The experimental results show that the thermal resistance of the heat pipes with water-based MWCNT nanofluids as working fluid is reduced up to 35.2% compared with that of heat pipe using DI water. The reduction rate of thermal resistance is greater than the enhancement rate of thermal conductivity. Finally, based on the experimental results, we present the reduction of the thermal resistances of the heat pipes compared with conventional heat pipes cannot be explained by only the thermal conductivity of water-based MWCNT nanofluids.

• 대한기계학회논문집B
• /
• 제30권9호
• /
• pp.898-904
• /
• 2006

A new method measuring thermal conductivity of fluids is proposed in this research. It is based on the steady state heat transfer from a hot central cylinder to a cold outer cylinder located concentrically. This method guarantees more stable measurement than conventional THM(transient hot-wire method) due to its simplicity of theoretical principle. Measurements was made for the three nanofluid samples with different particle concentration of pure, 2% and 4%. Nanofluids are made by mixing the pure transformer oil with AlN nano particles. Design of the sensor module and experimental procedures are explained and comparison of the measuring data between present method and THM was made in detail.