• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.320-323
• /
• 2020

Thin film coatings are commonly exploited to minimize wear and optimize the frictional behavior of various precision mechanical systems. The enhancement of thin film durability is directly related to the performance maximization of the system. Therefore, a fine approach to analyze the thin film wear behavior is required. Archard's equation is a representative and well-developed law that defines the wear coefficient, which is the probability of creating wear particles. A ploughing model is a commonly used model to determine the friction force during the abrasive contact. The equations demonstrate that the friction force and wear coefficient are inversely proportional to the hardness of the material. In this study, Archard's equation and ploughing models are modified with an effective hardness to minimize the gap between the experimental and numerical results. It is noted that the effective hardness is the hardness variation with respect to the penetration depth owing to the substrate effect. The nanoindentation method is utilized to characterize the effective hardness of Cu film. The wear coefficient value considering the effective hardness is more than three times higher than that without considering the effective hardness. The friction force predicted with the effective hardness agreed better with the results obtained directly from the friction force detecting sensor. This outcome is expected to improve the accuracy of friction and wear amount predictions.

• Structural Engineering and Mechanics
• /
• v.14 no.5
• /
• pp.595-610
• /
• 2002

This paper presents an efficiency of various non-conforming (NC) modes in development of a series of new finite elements with the special emphasis on 4-node quadrilateral elements. The NC modes have been used as a key scheme to improve the behaviors of various types of new finite elements, i.e., Mindlin plate bending elements, membrane elements with drilling degrees of freedom, flat shell elements. The NC modes are classified into three groups according to the 'correction constants' of 'Direct Modification Method'. The first group is 'basic NC modes', which have been widely used by a number of researchers in the finite element communities. The basic NC modes are effective to improve the behaviors of regular shaped elements. The second group is 'hierarchical NC modes' which improve the behaviors of distorted elements effectively. The last group is 'higher order NC modes' which improve the behaviors of plate-bending elements. When the basic NC modes are combined with hierarchical or higher order NC modes, the elements become insensitive to mesh distortions. When the membrane component of a flat shell has 'hierarchical NC modes', the membrane locking can be suppressed. A number of numerical tests are carried out to show the positive effect of aforementioned various NC modes incorporated into various types of finite elements.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.1
• /
• pp.1-17
• /
• 2011

A new method for option pricing based on the trinomial tree method is introduced. The new method calculates the local average of option prices around a node at each time, instead of computing prices at each node of the trinomial tree. Local averaging has a smoothing effect to reduce oscillations of the tree method and to speed up the convergence. The option price and the hedging parameters are then obtained by the compact scheme and the Richardson extrapolation. Computational results for the valuation of European and American vanilla and barrier options show superiority of the proposed scheme to several existing tree methods.

• Steel and Composite Structures
• /
• v.29 no.4
• /
• pp.509-526
• /
• 2018

The direct strength method adopted by the AISI Standard and AS/NZS 4600 is an advanced design method meant to substitute the effective width method for the design of cold-formed steel structural members accounting for local instability of thin plate elements. It was proven that the design strength formula for the direct strength method could predict the ultimate strength of medium strength steel welded section compressive and flexural members with local buckling reasonably. This paper focuses on the modification of the direct strength formula for the application to high strength and high performance steel welded section columns which have the nominal yield stress higher than 460 MPa and undergo local buckling, overall buckling or their interaction. The resistance of high strength steel welded H and Box section columns calculated by the proposed direct strength formulae were validated by comparison with various compression test results, FE results, and predictions by existing specifications.

• Kyungpook Mathematical Journal
• /
• v.60 no.4
• /
• pp.753-765
• /
• 2020

Smoking is one of the main causes of health problems and continues to be one of the world's most significant health challenges. In this paper, we use the multi-step Adomian decomposition method (MSADM) to obtain approximate analytical solutions for a mathematical fractional model of the evolution of the smoking habit. The proposed MSADM scheme is only a simple modification of the Adomian decomposition method (ADM), in which ADM is treated algorithmically with a sequence of small intervals (i.e. time step) for finding accurate approximate solutions to the corresponding problems. A comparative study between the new algorithm and the classical Runge-Kutta method is presented in the case of integer-order derivatives. The solutions obtained are also presented graphically. The results reveal that the method is effective and convenient for solving linear and nonlinear differential equations of fractional order.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.852-854
• /
• 1995

This paper proposes a new identification method that utilizes fuzzy inference in parameter identification. The prosed system has an additional control loop where a real plant has replaced by a plant model. Fuzzy rules describe the relationship between comparison results of the features and magnitude of modification in the model parameter values. In this paper, the tuning method which determines parameters of PID controller automatically is described through applying this algorithm to DC servo motor. And we intend to investigate effectiveness of the method by experiments. This method is effective in auto-tuning because the response of the closed loop has verified. The simulated and the experimental results of the dc servo motor are shown to confirm the viability of this method.

• Journal of Korean Academy of Nursing
• /
• v.32 no.6
• /
• pp.844-854
• /
• 2002

To examine the effect of the exercise therapy, and exercise-behavior modifi- cation therapy on obesity, blood lipids and self-esteem of the obese middle-aged women. Method: A total of 35 middle-aged women (BMI: over 30) were selected for this research. Walking at a 50% intensity was administered 4 days a week for 12 weeks, while the behavior modification therapy performed for 60~90 minutes per week for 12 weeks. Result: Body weight and BMI has significantly reduced in the case of EG and E BG. The result of comparing body weight between groups showed significant difference between EG and CG, and E BG and CG whereas BMI showed significant difference between EG and CG only. TC, TG, LDL-C, %TC/HDL-C have shown significant decrease in EG and E-BG, while HDL-C displayed significant increase in EG and E BG. And HDL-C showed significant decrease in CG. As for comparison between groups, significant difference was noted in EG and CG, and E BG and CG at TC, HDL-C, LDL-C, and in EG and CG at %TC/HDL-C. Self-esteem displayed significant increase in EG and E BG; however, there was no significant different in CG. As for comparison between groups, there was significant difference noted in E BG and CG only. Conclusion: The results showed that the exercise therapy and the exercise-behavior modification therapy were effective in changing obesity, blood lipids and self-esteem of the obese middle-aged women.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.1
• /
• pp.29-36
• /
• 2019

Background: An inability to cope with threatening dental stimuli, i.e., sight, sound, and sensation of airotor, manifests as anxiety and behavioral management problems. Behavior modification techniques involving pre-exposure to dental equipment will give children a first-hand experience of their use, sounds, and clinical effects. The aim of this study was to compare the techniques of Tell-Show-Play-doh, a smartphone dentist game, and a conventional Tell-Show-Do method in the behavior modification of anxious children in the dental operatory. Methods: Sixty children in the age group of 4-8 years, with Frankl's behavior rating score of 2 or 3, requiring Class I and II cavity restorations were divided into three groups. The groups were Group 1: Tell-Show-Play-doh; Group 2: smartphone dentist game; and Group 3: Tell-Show-Do technique and each group comprised of 20 children. Pulse rate, Facial Image Scale (FIS), Frankl's behavior rating scale, and FLACC (Face, Leg, Activity, Cry, Consolability) behavior scales were used to quantify anxious behavior. Operator compliance was recorded through a validated questionnaire. Results: The results showed lower mean pulse rates, lower FIS and FLACC scores, higher percentage of children with Frankl's behavior rating score of 4, and better operator compliance in both the Tell-Show-Play-doh and smartphone dentist game groups than in the conventional Tell-Show-Do group. Conclusion: The Tell-Show-Play-doh and smartphone dentist game techniques are effective tools to reduce dental anxiety in pediatric patients.

• Korean Journal of Materials Research
• /
• v.23 no.9
• /
• pp.501-509
• /
• 2013

To evaluate the development of the microstructure and mechanical properties on surface modified and post-heattreated Inconel 718 alloy, this study was carried out. A friction stir process as a surface modification method was employed, and overlap welded Inconel 718 alloy as an experimental material was selected. The friction stir process was carried out at a tool rotation speed of 200 rpm and tool down force of 19.6-39.2 kN; post-heat-treatment with two steps was carried out at $720^{\circ}C$ for 8 h and $620^{\circ}C$ for 6 h in vacuum. To prevent the surface oxidation of the specimen, the method of using argon gas as shielding was utilized during the friction stir process. As a result, applying the friction stir process was effective to develop the grain refinement accompanied by dynamic recrystallization, which resulted in enhanced mechanical properties as compared to the overlap welded material. Furthermore, the post-heat-treatment after the friction stir process accelerated the formation of precipitates, such as gamma prime (${\gamma}^{\prime}$) and MC carbides, which led to the significant improvement of mechanical properties. Consequently, the microhardness, yield, and tensile strengths of the post-heat-treated material were increased more than 110%, 124% and 85 %, respectively, relative to the overlap welded material. This study systematically examined the relationship between precipitates and mechanical properties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.19-24
• /
• 2009

Structural Dynamics Modification (SDM) is a very effective technique to improve structure's dynamic characteristics by adding or removing auxiliary structures, changing material properties and shape of structure. Among those of SDM technique, the method to change shape of structure has been mostly relied on engineer's experience and trial-and-error process which are very time consuming. In order to develop a systematic method to change structure shape, surface grooving technique is studied and successfully applied to HDD cover model. To verify Surface Grooving Technique, fully embossed HDD cover model was optimized. And comparing with previous optimization result, the effectiveness of this surface grooving technique was checked. The shape of groove and 1 st natural frequency were converged to the same result of previous optimization.