• 한국결정성장학회지
• /
• 제4권1호
• /
• pp.63-70
• /
• 1994

초이온도전체 ${\beta}-Ag_3SI$ 단결정을 AgI와 $AG_2S$의 혼합물을 반응시켜서 열처리하여 얻었다. 성장시킨 단결정은 직경 $200{mu}m$ 정도의 구상으로 성형시켰다. 실온에서 X-선 단결정 해석법을 이용하여 정밀한 결정구조 해석을 행했다. 이들 결정구조의 해석결과 ${\beta}-Ag_3SI$의 $Ag^+$는 6-배위의 3c자리보다 4-배위의 12h자리에 점유함이 밝혀졌다. $Ag^+$의 확률밀도분포(probabilty density function)로 부터 [110]방향에서 $Ag^+$의 one-particle potential(o.p.p.)을 계산하였다.${beta}-Ag_3SI$ 구조의(001)면에서 $Ag^+$가 확산에 필요한 활성화에너지는 0.012eV라는 것이 o.p.p.곡선에 의해 계산되었다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권4호
• /
• pp.296-303
• /
• 2005

A strain named as HJ35 was isolated from the skin of sixty-five men and fourteen women for acne therapy, in order to find an effective antimicrobial agent against Propionibacterium acnes. Isolate HJ35 was identified as Enterococcus faecium based on 16 rDNA sequence and produced enterocin HJ35 having antimicrobial activities against most lactic acid bacteria, En­terococcus spp., Staphylococcus aureus, S. epidermidis, Clostridium perfringens, some bacilli, Mi­crococcus flavus, Listeria monocytogenes, L. ivanovii, Escherichia coli, Pseudomonas fluorescens and Propionibacterium acnes, in the modified well diffusion method. Especially, enterocin HJ35 showed a bactericidal activity against Propionibacterium acnes P1. The antimicrobial activity of enterocin HJ35 was disappeared completely with the use of protease XIV. But enterocin HJ35 activity is very stable at high temperature (up to $100^{\circ}C$ for 30 min), in wide range of pH (3.0${\~}$9.0), and by treatment with organic solvents. The apparent molecular mass of enterocin HJ35 was estimated to be approximately 4${\~}$4.5 kDa on detection of its bactericidal activity after SDS-PAGE. In batch fermentation of E. faecium HJ35, enterocin HJ35 was produced at the mid­log growth phase, and its maximum production was obtained up to 2,300 AU/mL at the late stationary phase. By employing fed-batch fermentation, the enhanced production of enterocin HJ35 was achieved up to 12,800 AU/mL by feeding with 10 g/L glucose or 6 g/L lactate.

• 지질공학
• /
• 제29권4호
• /
• pp.367-381
• /
• 2019

We investigate pore pressure conditions and reservoir compaction associated with oil and gas production using 3 different permeability models, which are all based on one-dimensional radial flow diffusion model, but differ in considering permeability evolution during production. Model 1 assumes the most simplistic constant and invariable permeability regardless of production; Model 2 considers permeability reduction associated with reservoir compaction only due to pore pressure drawdown during production; Model 3 also considers permeability reduction but due to the effects of both pore pressure drawdown and coupled pore pressure-stress process. We first derive a unified stress-permeability relation that can be used for various sandstones. We then apply this equation to calculate pore pressure and permeability changes in the reservoir due to fluid extraction using the three permeability models. All the three models yield pore pressure profiles in the form of pressure funnel with different amounts of drawdown. Model 1, assuming constant permeability, obviously predicts the least amount of drawdown with pore pressure condition highest among the three models investigated. Model 2 estimates the largest amount of drawdown and lowest pore pressure condition. Model 3 shows slightly higher pore pressure condition than Model 2 because stress-pore pressure coupling process reduces the effective stress increase due to pore pressure depletion. We compare field data of production rate with the results of the three models. While models 1 and 2 respectively overestimates and underestimates the production rate, Model 3 estimates the field data fairly well. Our result affirms that coupling process between stress and pore pressure occurs during production, and that it is important to incorporate the coupling process in the permeability modeling, especially for tight reservoir having low permeability.

• 한국항공우주학회지
• /
• 제39권10호
• /
• pp.966-978
• /
• 2011

분출냉각은 높은 압력과 온도의 가혹한 환경에서 운용되는 고성능 액체로켓과 공기흡입엔진을 위한 가장 효과적인 냉각방법이다. 분출냉각이 적용되는 경우, 연소기 라이너와 터빈 블레이드/베인은 다공질 벽면을 통과하는 냉각재(공기 또는 연료)뿐만 아니라 차단막으로 작용하는 벽면을 빠져나온 냉각재에 의해 냉각된다. 이러한 냉각기술의 실용화는 가용한 다공질 재료의 부재로 인해 제한을 받아왔다. 그러나 금속결합 기술의 발전으로 확산접합과 식각된 얇은 금속판으로 제작한 Lamilloy$^{(R)}$와 같은 다층 기공 구조물이 개발되었다. 그리고 또한 경량 세라믹 매트릭스 복합재료가 개발됨에 따라 분출냉각은 근래 고성능 엔진 냉각을 위한 유망 기술로 여겨지고 있다. 본 논문에서는 분출냉각의 최근 연구동향 및 가스터빈, 액체로켓 및 극초음속 비행체 엔진에 이의 적용사례를 고찰하였다.

• Archives of Plastic Surgery
• /
• 제37권3호
• /
• pp.207-212
• /
• 2010

Purpose: The object of this study is to develop a novel BMP-2 delivery system for continuous osteogenic differentiation and to induce osteogenesis of stem cells using a bi-phase alginate carrier in vitro. Methods: Alginate nanoparticle loaded BMP-2 was prepared by the reverse emulsification-diffusion technique. Physical properties and release profiles of alginate carriers were measured by Instron and ELISA kit, respectively. Cell viability and alkaline phosphate activity of hBMSCs differentiation was also evaluated by MTS and Metra BAP assays, respectively. Results: Optimal concentration for bi-phase alginate carrier was determined as 2 wt% by evaluating mechanical and biological properties, and differentiation of BMSCs for bone regeneration. The 2% bi-phase alginate carrier had the lowest initial and final release ratio. In addition, the 2% bi-phase alginate carrier had a little higher ALP activity than the homogeneous carrier. An improved controlled release profile was obtained by combining alginate hydrogel with lyophilized particles. Conclusion: Bi-phase alginate carrier has many advantages such as biocompatibility and controlled release capability. It is expected to be effective as a scaffold and carrier in bone tissue engineering.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.35-41
• /
• 1999

In this study we investigated the effects of process variables on the bond strength, and its dependency upon the interfacial chemistry when the joined $ZrO_2$ toughened $Na\beta$"-alumina to $\alpha$-alumina using B$_2$$O_3$-$SiO_2$-Al$_2$$O_3$-CaO glass sealant. We observed that bond strength is mainly determined by the strength of the glass, which, in turn, depends on the glass composition established after joining reaction. Joining at $950^{\circ}C$ for 15min yielded the highest average bond strength of 66MPa. Different types of interfacial reaction seem to occur at each interface. After joining at $950^{\circ}C$ for 15min we found that Ca and Si diffuse much deeper(~15$\mu\textrm{m}$) into the $\beta$"-alumina composite than into the $\alpha$-alumina(<1$\mu\textrm{m}$) as a result of ion exchange reaction and more effective grain boundary diffusion. Thermal expansion coefficient of the glass was found to have changed more closely to those of the $\beta$"-alumina composite and $\alpha$-alumina, which put the glass under a slight compressive stress.ressive stress.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.120-124
• /
• 2011

Silicon heterojunction solar cells have been studied by many research groups. In this work, silicon heterojunction solar cells having a simple structure of Ag/ZnO:Al/n type a-Si:H/p type c-Si/Al were fabricated. Samples were fabricated to investigate the effect of transparent conductive oxide growth conditions on the interface between ZnO:Al layer and a-Si:H layer. One sample was deposited by ZnO:Al at low working pressure. The other sample was deposited by ZnO:Al at alternating high working pressure and low working pressure. Electrical properties and chemical properties were investigated by light I-V characteristics and AES method, respectively. The light I-V characteristics showed better efficiency on sample deposited by ZnO:Al by alternating high working pressure and low working pressure. Atomic concentrations and relative oxidation states of Si, O, and Zn were analyzed by AES method. For poor efficiency samples, Si was diffused into ZnO:Al layer and O was diffused at the interface of ZnO:Al and Si. Differentiated O KLL spectra, Zn LMM spectra, and Si KLL spectra were used for interface reaction and oxidation state. According to AES spectra, sample deposited by high working pressure was effective at reducing the interface reaction and the Si diffusion. Consequently, the efficiency was improved by suppressing the SiOx formation at the interface.

• Journal of Pharmaceutical Investigation
• /
• 제41권1호
• /
• pp.9-17
• /
• 2011

The objective of this work is to study transdermal delivery of calcitonin using iontophoresis and to evaluate various factors which affect the transdermal transport. We have studied the effect of polarity, current density, drug concentration, penetration enhancers (isopropyl myristate [IPM] and ethanol) and laser treatment on transdermal flux and the results were compared. We also investigated the iontophoretic flux from microemulsions containing calcitonin together with oleic acid (OA) or IPM. In vitro flux study was performed at $33^{\circ}C$, using side-by-side diffusion cell and full thickness hairless mouse skin. Anodal delivery at pH 3.0 was much larger than cathodal and passive delivery, due to the positive charge of calcitonin. Cumulative amount delivered (CUM) by cathodal or passive delivery was close to zero for 10 hours. The pretreatment of skin by neat IPM markedly increased the CUM anodically. CUM increased as the current density, drug concentration or the duration of IPM treatment increased. Microemulsion containing IPM or oleic acid was prepared and the phase diagram was constructed. CUM also increased when IPM was incorporated into a microemulsion. OA microemulsion showed similar enhancing effect to IPM microemulsion. The delivery of calcitonin from 70% (v/v) ethanol aqueous solution showed a large increase in flux. Laser treatment of skin before flux experiment exhibited about 2 fold increase in total calcitonin amount transported for 12 hours, when compared to that delivered by IPM microemulsion. Based on these results, we have evaluated the possibility of delivering enough amount of calcitonin to reach the therapeutic level. The data suggest that it is highly possible to deliver clinically effective amount of calcitonin using iontophoresis patch with small area (<10 $cm^2$).

• 한국정보통신학회논문지
• /
• 제15권4호
• /
• pp.773-779
• /
• 2011

자유전단류(Shear free flow) 가정을 이용한 수상함 항적모델을 잠수함에 적용 결과 잠수함 난류항적 지름은 $x^n,\;({\frac{1}{5}}{\leq}n\;<{\frac{1}{2}})$ 에 비례하였으며, 난류항적의 최소 확산을 가정할 때(${\sigma}=50.25$, 즉 ${\infty}\;x^{1/5}$인 경우), 길이65m, 폭 6.5m 속력 6kts 인 잠수함의 난류항적 반지름은 잠수함 함미로부터 1.2Km 후방에서 약 20m, 10Km 후방에서는 약 30m에 달하였고, 해수면에서 관측 가능한 잠수함 난류항적은 잔잔한 해상상태에서 잠수함 후방 약 15Km에 이르는 것으로 나타났으나 쇄파가 발생하는 악천후에서는 해수면에서 난류항적을 관측하기는 매우 제한되었다. 이는 적어도 서해와 같이 얕은 잠수함 작전환경에서는 잠수함 난류항적이 해수면에서 나타나는 것을 의미하며 SAR와 같은 탐지체계를 이용 시 탐색 가능함을 의미한다.

• 한국콘텐츠학회논문지
• /
• 제14권5호
• /
• pp.356-363
• /
• 2014

LTE서비스가 도입된 이래, 지속적인 기술발전과 융 복합서비스에 대한 수요확대 등으로 정보통신서비스를 위한 결합상품 마케팅도 증가하고 있다. 본 논문에서는 통신서비스의 결합상품 마케팅 전략을 수립하기 위하여 LTE서비스 사용자의 결합상품 이용여부에 따른 사용자 특성을 분석하고 있다. 결합판매동기이론과 합리적 행위이론, 혁신확산이론을 근거로 하여 주관적 규범, 혁신성과 같은 사용자 특성 변수를 도출하였으며 결합상품 이용여부에 따라 각 변수들의 평균값이 어떻게 차이가 나는지 T-검증을 통하여 실증분석을 하였다. 분석결과, LTE서비스 사용자의 주관적 규범과 혁신성 변수는 결합상품 여부에 따라 평균값 차이가 있었으며 그 값은 결합상품 가입자가 더 큰 것으로 나타났다. 결과적으로 결합상품의 판매를 확대하기 위하여, 첫째 더 혁신적인 가치를 제공할 수 있도록 제품이나 서비스 설계가 이루어져야 할 것이며, 둘째 주변사람들의 영향력을 바탕으로 한 입소문마케팅 전략이 효과적일 수 있음을 알 수 있었다.