• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2005년도 추계학술대회
• /
• pp.356-365
• /
• 2005

Since their first inception a few decades ago, software components have received much attention mainly due to their alleged benefits of quality and productivity improvement. Despite this, it is yet to be agreed upon what and how components should be designed. This paper aimed to bridge the gap by proposing a collaborative process where the voice of the customer is captured and documented by employing the event and entity models. These requirement elements (WHAT) are cross-tabulated in three relation matrices in accordance with the weights provided by the business users. The requirements are fed into the algorithm invented by the authors to optimize the component grouping (HOW). This collaborative process has been successfully validated at an enterprise wide software development project. The process was effective to help the users more actively involved in the design of the system and made the whole process faster and more adaptive to the changes.

• 동력기계공학회지
• /
• 제6권1호
• /
• pp.27-35
• /
• 2002

In this paper, the effect of oxygen component in fuel on the exhaust emissions has been investigated for direct injection diesel engine. It is tested to estimate change of engine performance and exhaust emission characteristics for the commercial diesel fuel and oxygenate blended fuel which has four kinds of mixed ratio. And, the effects of exhaust gas recirculation(EGR) on the characteristics of NOx emission and brake specific fuel consumption rate have been investigated. Dimethyl carbonate(DMC) contains oxygen component 53.3% in itself, and it is a kind of effective oxygenated fuel of carbonate group that the smoke emission of DMC is reduced remarkably in comparison with commercial diesel fuel, that is, it can supply oxygen component sufficiently at higher loads and speeds in diesel engine. It was found that simultaneous reduction of smoke and NOx was achieved with oxygenated fuel and EGR method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.955-958
• /
• 2005

In this study, the wind load characteristics for a transmission tower is investigated considering the effect of the transmission lines through stochastic analysis. The assemblage of the transmission line and insulator are modeled as a double pendulum system connected to the SDOF model of the tower It is observed that the background component of the overturing moment induced by the wind response of the transmission line has considerable portion in the total overturning moment. Based on this result, a rotational viscoelastic damper (VED) is proposed for the mitigation of the transmission line reactions, which act as wind load transferred to the tower. To verify the effectiveness of the proposed strategy, time history analysis is conducted for different wind velocities and VED damping constants. From the analysis, the proposed VED is proved to be effective for mitigation of the background component rather than the resonance component of the transmission line reaction.

• 대한임베디드공학회논문지
• /
• 제6권1호
• /
• pp.48-54
• /
• 2011

As personal or compact devices with image acquisition functionality are becoming easily available for common users, the voluminous images that need to be managed by image related services or systems demand efficient and effective methods in the perspective of image identification. The objective of image identification is to associate an image with a unique identifier. Moreover, whenever an image identifier needs to be regenerated, the newly generated identifier should be consistent. In this paper, we propose three image identifier generation methods utilizing image features: linear component, luminance area, and combination of both features. The linear component based method exploits the information of distribution of partial lines over an image, while the luminance area based method utilizes the partition of an image into a number of small areas according to the same luminance degree. The third method is proposed in order to take advantage of both former methods. In this paper, we also demonstrate the experimental evaluations for uniqueness and similarity analysis that have shown favorable results.

• Earthquakes and Structures
• /
• 제15권5호
• /
• pp.453-462
• /
• 2018

Damages to buildings affected by a near-fault strong ground motion are largely attributed to the vertical component of the earthquake resulting in column failures, which could lead to disproportionate building catastrophic collapse in a progressive fashion. Recently, considerable interests are awakening to study effects of earthquake vertical components on structural responses. In this study, detailed modeling and time-history analyses of a 12-story code-conforming reinforced concrete moment frame building carrying the gravity loads, and exposed to once only the horizontal component of, and second time simultaneously the horizontal and vertical components of an ensemble of far-field and near-field earthquakes are conducted. Structural responses inclusive of tension, compression and its fluctuations in columns, the ratio of shear demand to capacity in columns and peak mid-span moment demand in beams are compared with and without the presence of the vertical component of earthquake records. The influences of the existence of earthquake vertical component in both exterior and interior spans are separately studied. Thereafter, the correlation between the increase of demands induced by the vertical component of the earthquake and the ratio of a set of earthquake record characteristic parameters is investigated. It is shown that uplift initiation and the magnitude of tensile forces developed in corner columns are relatively more critical. Presence of vertical component of earthquake leads to a drop in minimum compressive force and initiation of tension in columns. The magnitude of this reduction in the most critical case is recorded on average 84% under near-fault ground motions. Besides, the presence of earthquake vertical components increases the shear capacity required in columns, which is at most 31%. In the best case, a direct correlation of 95% between the increase of the maximum compressive force and the ratio of vertical to horizontal 'effective peak acceleration (EPA)' is observed.

• 대한한의학회지
• /
• 제23권4호
• /
• pp.45-54
• /
• 2002

Objectives: In order to investigate the relationship of Radix Trichosanthis components and the melanin synthesis, the author has analyzed the cell viability and tyrosinase activity, melanin content and morphologic changes in n-hexane, EtOAc, n-BuOH, and H2O fraction. Methods: At first, in order to determine the concentration of the Radix Trichosanthis component, the author investigated the viability of B16 melanoma cell. To measure the effects of Trichosanthes kirilowii extracts (n-BuOH, n-Hexane, EtOAc, H2O fractions) on the viability of A549 cells, A549 cells were treated with various concentrations (from 0.5 to $25{\;}\mu\textrm{g}/ml$) of components of Trichosanthes kirilowii. After 24hrs, the cell viability was measured by MTT assay. The EtOAc components of Trichosanthes kirilowii decreased the viability of A549 cells in a dose-dependent manner. H2O and n-BuOH components had no cell toxicity till $25{\;}\mu\textrm{g}/ml$, the n-hexane component showed minor cell toxicity at $25{\;}\mu\textrm{g}/ml$ and the EtOAc component cell toxicity was revealed at $5{\;}\mu\textrm{g}/ml$ concentration. Results: 1. The results of tyrosinase activity and the Radix Trichosanthis component; n-hexane and EtOAc components controlled it effectively; the n-BuOH components were less effective. 2. The results of melanin content analysis showed that the n-hexane and EtOAc components effectively inhibited, the n-BuOH fraction inhibited less, and H2O component didn't inhibit the terminal melanin formation. 3. In the n-BuOH and H2O component there were no changes, but in the n-hexane component the melanin content was effectively inhibited. 4. In the EtOAc fraction, although the melanin content was inhibited, the cell count was evidently suppressed, Of all of the Radix Trichosanthis components, the n-Hexane and EtOAc fractions inhibited the melanin synthesis best, but owing to its toxicity, the EtOAc components inhibited the cell count. Conclusion: The above results demonstrated that Radix Trichosanthis n-hexane fraction efficiently inhibited the tyrosinase activity and melanin synthesis.

• Steel and Composite Structures
• /
• 제25권1호
• /
• pp.117-126
• /
• 2017

The component method is an analytical approach for investigating the moment-rotation relationship of steel connections. In this study, the component method was improved from two aspects: (i) load analysis of mechanical model; and (ii) combination of spring elements. An optimized component method with more reasonable component models, spring arrangement position, and boundary conditions was developed using finite element analysis. An experimental testing program in two major-axis and two minor-axis connections under symmetrically loading was carried out to verify this method. The initial rotational stiffness obtained from the optimized component method was consistent with the experimental results. It can be concluded that (i) The coupling stiffness between column and beam flanges significantly affects the effective height of the tensile-column web. (ii) The mechanical properties of the bending components were obtained using an equivalent t-stub model considering the bending capacity of bolts. (iii) Using the optimized mechanical components, the initial rotational stiffness was accurately calculated using the spring system. (iv) The characteristics of moment-rotation relationship for beam to column connections were effectively expressed by the SPRING element analysis model using ABAQUS. The calculations are simpler, and the results are accurate.

• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.1-5
• /
• 2024

In the electronics industry, a lot of research and development is being conducted on electronic component supply, component alignment and insertion, and automation of soldering on the back side of the PCB for automatic PCB assembly. Additionally, as the use of electronic components increases in the automotive component field, there is a growing need to automate the alignment and insertion of components with leads such as transistors, coils, and fuses on PCB. In response to these demands, the types of PCB and parts used have been more various, and as this industrial trend, the quantity and placement of automation equipment that supplies, aligns, inserts, and solders components has become important in PCB manufacturing plants. It is also necessary to reduce the pre-setting time before using each automation equipment. In this study, we propose a method in which a vision system recognizes the type of component and simultaneously corrects alignment errors during the process of aligning and inserting various types of electronic components. The proposed method is effective in manufacturing various types of PCBs by minimizing the amount of automatic equipment inserted after alignment with the component supply device and omitting the preset process depending on the type of component supplied. Also the advantage of the proposed method is that the structure of the existing automatic insertion machine can be easily modified and utilized without major changes.

• 정보처리학회논문지D
• /
• 제10D권1호
• /
• pp.85-100
• /
• 2003

오늘날의 컴퓨팅 시스템은 인터넷을 사용하여 비즈니스 거래와 분산 업무 처리로 확대되어가고 있으며 정보 기술은 점차적으로 재사용성과 독립성 그리고 이식성을 가진 컴포넌트를 기반으로 한 응용 개발이 확산되고 있다. 컴포넌트 개발 형태는 코드의 재사용이나 클래스 라이브러리보다 좀 더 발전된 형태의 부품개발 형태로서, CBD(Component Based Development)를 기초로 한다. 그러나, CBD를 이용하여 새로운 컴포넌트를 구축하는 비용의 증가와 함께 비즈니스 요구사항에 맞는 컴포넌트 개발을 위한 노력이 필요하며, 빠르게 정확한 컴포넌트 정보를 웹 상에서 지원할 수 있도록 시스템 측면에서 정규화 형태의 컴포넌트 모델이 요구되고 있다. 본 논문에서는 사용자의 요구사항에 접근하고 웹 상에서 빠르고 신속하게 애플리케이션이 개발되는데 목적을 두고 있으며, 네트워크 상에서 비즈니스 도메인을 기반한 가장 소규모 단위의 분산 컴포넌트를 대상으로 인터페이스 명세를 제공하고자 한다. 분산 컴포넌트 내부와 외부 관계를 담고 있는 명세는 사용자 중심의 컴포넌트를 제공하기 위해서 웹 상에서 요구사항을 작성하고 결국 이들은 조합되어 e-비즈니스 컴포넌트 명세 제공이 요구된다. 따라서 본 논문에서는 사용자가 분산 컴포넌트를 등록하고, 이에 대한 컴포넌트 정보를 검색말 수 있는 e-BCOS(e-Busines Component System)을 설계 구현한다. e-BCOS는 컴포넌트 등록. 검색을 위한 에이전트 시스템으로, 비즈니스 도메인에서의 분산 컴포넌트의 e-비즈니스 컴포넌트 개발을 통해 재사용성을 증대시키고, 웹 상에서 애플리케이션 구축을 빠르고 신속하게 처리될 수 있도록 하며, 사용자가 쉽게 컴포넌트에 관한 정보를 얻고 이해할 수 있도록 해준다. 또한 명세의 공유와 유통을 원활히 하기 위해서 XML(extensible Markup Language)로 명세를 표현하여 사용자의 다양한 욕구를 충족시키도록 한다. 따라서, e-BCOS는 에이전트에 의해서 효율성 증대와 시간 절약 및 신뢰성과 유지보수성을 증대할 수 있는 잇점을 가진다.

• 한국임상약학회지
• /
• 제27권2호
• /
• pp.55-62
• /
• 2017

Experiential education is a core curriculum of pharmacy education. In experiential education, formative feedback is an integral component of learning and teaching process. Feedback is defined as information provided by a preceptor regarding student's performance based on direct observation. With effective feedback, students can have opportunities to reinforce or correct behaviors and to acquire knowledge or skills. Students highly value and appreciate feedback. They rank provision of effective feedback as one of the most important qualities of preceptors. Preceptors, however, lack an understanding of feedback or practical skills necessary for providing effective feedback. As a result in reality, the feedback provided to students can be differentially effective in improving students' learning. This article describes a theoretical understanding of feedback including definition and value, as well as types of feedback. In addition, practical aspects in providing feedback, such as contents, timing, techniques, and models, are addressed. By understanding the value of feedback and mastering various feedback skills, preceptors will promote students' learning and enhance educational outcomes of experiential education.