• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.3
• /
• pp.1-6
• /
• 2009

This paper presents a geometrical error compensation of tool alignment for sharp edge bite on B axis controlled machine. In precision micro patterning, bite alignment is crucial parameter for machined surface. To decrease bite alignment error, plus tilted bite from B axis center is touched to reference work piece(pin gauge) and checked the deviation from original position. Same process is repeated for maximum touch deviation value. From this touched position value, wheel alignment error in X axis and Z axis can be calculated on B axis center. Experimental results show that this compensation method is efficient to correct sharp edge bite alignment.

• Journal of Oral Medicine and Pain
• /
• v.23 no.4
• /
• pp.379-385
• /
• 1998

A patient with TMJ osteoarthritis and anterior open bite was treated with an intermaxillary traction device. Pretreatment examination revelaed a pain in both TMJ during mouth opening, moderate tendernesso f left sternocleidomastoid and right trapezius muscles. Anterior open Bite was aobserved with interincisal distance of 2mm. Tomograms and MRI showed anterior disc displacement withouit reductoin of both temporomandibular joints, and the condyles were flattened and slightly eroded. A pair of full-coverage occlusal appliances was made on both maxillary and mandibular dentition, with pivoting fulcrum on the site of the second moalr. Traction force was gained by the intermaxillary orthodontic elastics which were hooked by orthodontic brackets on the labial surfaces of the upper and lower anterior and premolar teeth. After 8 weeks of traction treatment, the joint pain was subsided completely and the anterior open bite was closed to get an edge to edge relationship of anterior teeth.

• Journal of Oral Medicine and Pain
• /
• v.23 no.4
• /
• pp.369-377
• /
• 1998

A patient with TMJ osteoarthritis and anterior open bite was treated with an intermaxillary traction device. Pretreatment examination revelaed a pain in both TMJ during mouth opening, moderate tendernesso f left sternocleidomastoid and right trapezius muscles. Anterior open Bite was aobserved with interincisal distance of 2mm. Tomograms and MRI showed anterior disc displacement withouit reductoin of both temporomandibular joints, and the condyles were flattened and slightly eroded. A pair of full-coverage occlusal appliances was made on both maxillary and mandibular dentition, with pivoting fulcrum on the site of the second moalr. Traction force was gained by the intermaxillary orthodontic elastics which were hooked by orthodontic brackets on the labial surfaces of the upper and lower anterior and premolar teeth. After 8 weeks of traction treatment, the joint pain was subsided completely and the anterior open bite was closed to get an edge to edge relationship of anterior teeth.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.91-99
• /
• 2024

In the case of skeletal class III edentulous patients, the stability of dentures can be achieved by using a crossbite by considering the residual ridge relationship when fabricating complete dentures. Forming the anterior teeth in a normal occlusal relationship in a skeletal class III ridge relationship may reduce the stability of the denture by increasing the anterior cantilever. However, when patients use complete dentures, not only functional aspects but also aesthetic aspects are important. The aesthetics of complete dentures depends on how the anterior artificial teeth are arranged, and cases of complete denture fabrication using normal occlusion or edge-to-edge bite in edentulous patients with skeletal class III ridge relationships have been reported. In this case, complete dentures were fabricated for an edentulous patient with a skeletal class III edentulous patients by forming anterior edge-to-edge bite considering neutral zone in maxillary anterior teeth, and good aesthetic and functional results were obtained.

• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.39-65
• /
• 1979

The purpose of this study was to investigate the pattern of irregularities of teeth in various malocclusion groups. The subjects consist of 803 out-patients (355 males, and 448 females) in department of Orthodontics of S.N.U. Hospital, Yonsei University, and Kyunghi University Hospital. The results were as follows. 1. The proportions of subjects on the basis of Angle's Classification were 39.2% (42.2% male, and 57.8% fomale) in class I malocclusion, 29.0% (44.6% male, and 55.4% female) in class II. div. 1., 3.5%(46.4% male, and 53.6% female) in class II. div. 2., 28.3%(46.3% male, and 53.7% female) in class III. 2. Considering all the subjects, the percentage of teeth crowding was 67.8% (45.0% male, and 55.0% female). In class I malocclusion, the percentage of Crowding was 70.8%(43.5% male, and 56.5% female) with higher frequency in upper anterior teeth than in lower anterior. 3. The percentage of Maxillary anterior diastema was 25.6% (45.6% male, and 54.4% female) on the whole. In class II. div. 1. malocclusion, the percentage was 28.8% (46.3% male, and 53.7% female) and in class III, the percentage was 19.8% (46.7% male, and 53.3% female). Thus, frequency of maxillary anterior distema, was comparatively higher in class II. div. 1. than in class III. 4. The percentage of high canine was 25.1% (53.2% male, and 46.8% female) on the whole, and was 86.0% male and 76.6% female in right side, 73.0% male and 72.3% female in left side. In calss II. div. 2., the percentage was 53.6% (46.7% male, and 53.3% female ). In class II. div. 1., the percentage was 16.7% (46.2% male, and 53.8%) with higher frequency in class II. div.2. 5. The percentage of deep overbite was 23.0% (43. 2% male, and 56.8% female) on the whole. Ia class 11. div. 2., and in clas sll. div. 1., its were 89.3%(48.0% male and 52.0% female), 54.5% (40.9% male, and 59.1% female) respectively. This result can be considered as one of the characterics of Angle's class 11 malocclusion group. 6. The percentage of spacing was 23.0% (36.8% male, and 63.2% female) on the whole, In class II. div. 1., and in class II. div. 2., its were 26.1% (44.3% male, and 55. 7% female), 7.1% (50.0% male, and 50.0% female) respectively. 7. The percentage of open bite was 14.3% (42.6% male, and 57.4% female) on the whole with higher rate on the anterior part. It rated 17.6%(50. 0% male, and 50.0% female) in class III, but none in class II. div. 2. 8. The percentage of crossbite was 22.5% (55.8% male, and 44.2% female) on the whole, with higher frequency on the anterior part than on the posterior part. In Angle's class III, it rated as much as 55.1% (57.6% male, and 42.4% female). 9. The percentage of edge-to-edge bite was 20.4% (47.6% male, and 52.4% female) with higher frequency on anterior part than on posterior part. 10. The percentage of irregularities of teeth in various malocclusion groups, was 21.5% (24.8% maxillary, and 18.1% mandible) in crowding, 20.8% (23.5% maxillary, and 18.0% mandible) in rotation, 10.7% (10.6% maxillary, and 10.8% mandible) in cross bite, 9.5% (11.8% maxillary, and 7.3% mandible) in spacing, 8.5% (8.5% maxillary, and 8.5% mandible) in edge-to-edge bite, 8.1% (8.3% maxillary, 7.8% mandible) in open bite. Crowding teeth, spacing teeth, and rotating teeh were more prevalent in anterior part than in posterior part. Cross bite teeth and edge-to-edge bite teeth were more prevalent in class III malocclusion than in another.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.41-41
• /
• 2010

In this research, to study tungsten carbide alloy(Co 0.5%) ultra precision turning possibility that is used Glass Molding Press(GMP) using conventional (Rake angle $-25^{\circ}$) single crystal diamond bite observed machining surface condition, surface roughness($R_a$), diamond bite cutting edge after tungsten carbide alloy ultra precision turning. Suggested and designed optimum chamfer bite shape to suggest ultra precision optimum bite using Finite Element Analysis(FEM). After machining tungsten carbide alloy ultra precision turning using optimum chamfer bite and comparing with conventional bite machine result and studied optimum chamfer bite design inspection and also tungsten carbide ultra precision turning possibility for high temperature compression glass lens molding.

• Parasites, Hosts and Diseases
• /
• v.48 no.4
• /
• pp.313-317
• /
• 2010

A case of tick bite was found in the inguinal region of a 74-year-old Korean woman. She was attacked by the tick while working in her vegetable garden in the vicinity of mountain located in Suncheon City, the southern coastal area of the Korean Peninsula. On admission she complained of mild discomfort and itching around the bite area. The causative tick was 23 mm long and had slender pedipalps. The scutum was quite ornate and had eyes at the edge. The genital aperture was located anterior to the level of the coxa II. The spiracular plate was comma-shaped and the anus was surrounded posteriorly by the anal groove. The coxa I had subequal 2 spurs; the external one slightly larger. The spur of coxa IV was slightly longer than those of coxae II and III. The tarsus IV had 2 distinct subapical ventral spurs. It was identified as the fully engorged adult female of Amblyomma testudinarium. This is the first human case of Amblyomma bite in Korea.

• The Journal of the Korean dental association
• /
• v.22 no.10 s.185
• /
• pp.869-877
• /
• 1984

An objective examination of 123 subjects aged from 19 to 23 was made from a clinical standpoints to determine the natural occurrence in anterior tooth contact in centric occlusion, and tooth contact in protrusive occlusion, left and right lateral excursions, and temporomandibular dysfunction. 1. In centric occlusion, maxillary 6 anterior contact type was frequently observe (30.08%) compared with other types of contact (incisor contact: 19.47%, no contact: 17.70%, canine and incisor contact: 15.04%, canines contact: 12.39%, unilateral canine contact: 5.31%) (P<0.01) 2. In protrusive position (edge to edge bite), maxillary central incisors contact was predominant (86.7%). (P<0.01) 3. In lateral excursion, there was not any significant difference between canine guided occlusion (47.79%) and group function occlusion (total 51.32%, AG:9.29%, PG:13.27%, G:28.76%). 4. Temporomandibular joint dysfunction was observed in 12.4% of 123 subjects.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1619-1625
• /
• 2012

An electrical steel strip is commonly used as a core material in all types of electric transformers and motors. It is produced by a cold rolling process. In this paper, a damage-mechanics-based approach that predicts the edge fracture of an electrical steel strip during cold rolling is presented. We adopted the normal tensile stress criterion and the fracture energy method as a damage initiation criterion and a damage evolution scheme, respectively. We employed finite element analysis (FEA) to simulate crack initiation and propagation at the initial notch located at the edges of the strip. The material constants required in FEA were experimentally obtained by tensile tests using a standard and a notched sheet-type specimen. The results reveal that the edge crack was initiated at the entrance of the roll bite and that it rapidly evolved at the exit. The evolution length of the edge crack increased as the length of the initial notch as well as the front tension reel force of the strip increased.

• The korean journal of orthodontics
• /
• v.13 no.1
• /
• pp.63-72
• /
• 1983

The author was to study the types and distribution of malocclusion in the 1217 patients with diagnostic charts, cephalograms and study models, who have been treated from March, 1973 to August, 1982 in the Department of orthodontics, Infirmary of Dental College, Yon Sei University. The results were as follows; 1. In the Angle's classification of malocclusion, it was presented that class I malocclusion was 671 persons $(55.1\%)$, class II division 1 malocclusion was 241 persons $(19.8\%)$, class II division 2 malocclusion was 30 persons $(2.5\%)$ and class III malocclusion was 275 persons $(22.6\%)$. 2. In the Angle's class I malocclusion, the crowding was most remarkable $(39\%)$ 3. In the Angle's class II malocclusion, 88 persons $(32.5\%)$ were due to the undergrowth of the mandible, and deep bite was most frequent. 4. In the Angle's class II malocclusion, 94 persons $(34.2\%)$ were .in the pseudo type, 84 persons $(29.8\%)$ were due to the overgrowth of the mandible, and openbite and edge to edge bite were most frequent. 5. In the sexual distribution of the patients, female patients were 791 persons $(65\%)$, male patients were 426 persons $(35\%)$, and the number of females was 1.8 times than that of males. 6. In the age distribution of the patients, 572 persons $(47\%)$ were in the 9-13 years old. 7. In the regional distribution of the patients, most of them lived near the hospital.