• Journal of The Korean Astronomical Society
• /
• v.36 no.spc1
• /
• pp.75-81
• /
• 2003

Changes in the earth's climate depend on changes in the net sunlight reaching us. The net depends on the sun's output and earth's reflectance, or albedo. Here we develop the limits on the changes in the sun's output in historical times based on the physics of the origin of solar cycle changes. Many have suggested that the sun's output could have been $0.5\%$ less during the Maunder minimum, whereas the variation over the solar cycle is only about $0.1\%$. The frequencies of solar oscillations (f- and p-modes) evolve through the solar cycle, and provide the most exact measure of the cycle-dependent changes in the sun. But precisely what are they probing? The changes in the sun's output, structure and oscillation frequencies are driven by some combination of changes in the magnetic field, thermal structure and velocity field. It has been unclear what is the precise combination of the three. One way or another, this thorny issue rests on an understanding of the response of the solar structure to increased magnetic field, but this is complicated. Thus, we do not understand the origin of the sun's irradiance increase with increasing magnetic activity. Until recently, it seemed that an unphysically large magnetic field change was required to account for the frequency evolution during the cycle. However, the problem seems to have been solved (Dziembowski, Goode & Schou 2001) using f-mode data on size variations of the sun. From this and the work of Dziembowski & Goode (2003), we suggest that in historical times the sun couldn't be much dimmer than it is at activity minimum.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.11
• /
• pp.45-53
• /
• 2016

A precast panel wall system resists against the horizontal earth pressure by increasing the shear strength of ground by reinforcement connected to the panel. The application of precast panel wall system is growing to lately minimize the earth work and environmental damage caused by large cut slope and to use the limited land effectively. The ground adhered panel wall system is the construction method that has the panel engraved with natural rock shape to improve the landscape. This system is developed to complete Top-Down method, and it is possible to have vertical cut, and to adhere to in-situ ground, improve construction ability by minimizing the ground relaxation and exclusion the trench and backfill process. In this study the field tests were performed to verify the construction ability about the vertical cut and complete Top-Down process and the construction behavior of ground adhered panel wall system was analyzed by large scale loading test and measurement results during loading test.

• Journal of the Korean earth science society
• /
• v.36 no.4
• /
• pp.341-350
• /
• 2015

This study is to explore geosites considering the geological characteristics in Gochang-gun and to investigate a possibility of being designated as the national geopark of Korea. In this study, the geosites within Gochang-gun are explored through literature search and field work. The results indicate that seven of the geosites in the Seonunsan area are relevant as potential national geopark, including Jinheunggul, Dosolam Maebulsang, Youngmungul, Nakjodae and Cheonmabong, Byungbawi, spherulitic rhyolite, and Dolmen site. In addition, there are other areas that have valus in terms of geological and educational aspect, including Hajeon mud flat and Myoungsasipri beach. The results of study imply that if various educational programs for the geotourism are properly developed, the Gochang-gun area has potential to be designated as the national geopark of Korea.

• Journal of the Korean Society of Costume
• /
• v.51 no.2
• /
• pp.5-25
• /
• 2001

Jade, which is a kind of stone, with its transparent body, lustrous and bright character, But jade is not the only fair stone. There are three kinds of jade objects 1) tallies used in the court. 2) ceremonial jades. 3) ordinary jade for decoration, for inlaid work and for burial. Among the ceremonial jade, the most important were the "liu jui" and "liu ch′i." The former was supposed to be held by people in the court as symbols of their authority : 1) "then-kuei(鎭圭)" for the emperor. 2) "hang-kuei(恒圭)" for a duke, 3) "hsin-kuei(信圭)" a marquis. 4) "kung-kuei(躬圭)" for an earl, these "kuei" were alike in shape, but differed in size. 4) "ku-pi(穀璧)" for a viscount. 5) "p′u-pi(蒲璧)" for a baron, "pi(璧)" differed in decoration but were alike in shape. "Liu ch′i(六器)" were ceremonial objects used by the emperor in worshipping Heaven, Earth, and the Four Directions : "ts′ang-pi(倉璧)," greenish jade disk, used in worthipping Heaven "huang-tsung(黃琮)," yellow jade cylinder, used in worshipping Earth ; "cuing-kuei,(靑圭)" blue jade tablet. used in worshipping the East : "chih-chang(赤璋)," red jade tablet, used in worshipping the South : "hsuan-huang(玄璜)," black crescent, used in worshipping the North. Five kinds of tallies were "chen-kuei(鎭圭)," "yenkuei(琰圭)," "yuan-kuei(玩圭)," "ku-kuei(穀圭)." They were used to console people during disaster, to subjugate an official who had committed a crime, to reward a prize to an official for his merit or good conduct, to arbitrate disputes between high officials, to marry princess. and to dispatch troops. Since the west wei(西魏), Kuei and Hole were made of Ivory, wood and bamboo, who had ivory for fifth grade and wood and bamboo for under sixth grade. After Eastern Chou, all officials beginning to had kuei hole. symbol of Authority. and his wives. After Dang dynasty, Japan is the same. In korea. After king Bupheung in ancient and South(unification) Silla, North Kingdom Bohai, Koryo, and Chosen dynasty had ceremonial jade, Kuei and Hole.

• Korean Journal of Materials Research
• /
• v.20 no.7
• /
• pp.370-373
• /
• 2010

In fabricating plasma display panels, the photolithographic process is used to form patterns of barrier ribs with high accuracy and high aspect ratio. It is important in the photolithographic process to control the refractive index of the photosensitive paste. The composition of this paste for photolithography is based on the $B_2O_3-SiO_2-Al_2O_3$ glass system, including additives of alkali oxides and rare earth oxides. In this work, we investigated the density, structure and refractive index of glasses based on the $B_2O_3-SiO_2-Al_2O_3$ system with the addition of $Li_2O$, $K_2O$, $Na_2O$, CaO, SrO, and MgO. The refractive index of the glasses containing K2O, Na2O and CaO was similar to that of the [BO3] fraction while that of the SrO, MgO and Li2O containing glasses were not correlated with the coordination fraction. The coordination number of the boron atoms was measured by MAS NMR. The refractive index increased with a decrease of molar volume due to the increase in the number of non-bridging oxygen atoms and the polarizability. The lowest refractive index (1.485) in this study was that of the $B_2O_3-SiO_2-Al_2O_3-K_2O$ glass system due to the larger ionic radius of $K^+$. Based on our results, it has been determined that the refractive index of the $B_2O_3-SiO_2-Al_2O_3$ system should be controlled by the addition of alkali oxides and alkali earth oxides for proper formation of the photosensitive paste.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.1
• /
• pp.11-19
• /
• 2016

This paper presents the results of a scale model test to the effect of heat exchanger drainage method in retaining wall of weathered granite soil. Purpose to rise in the temperature of the heat wires inside the weathered granite soil is preventing the collapse of the retaining wall and drainage smoothly moved to the drainage layer. Especially using a spray gun to simulate the rainfall since the rainfall drainage work is important for the rainfall effect on soil, find the difference about displacement of the retaining wall, change of volume water content, drainage, earth pressure and change in the strain of the geosynthetic was effected to heat exchanger within the soil. The result from applying the heat exchanger method decreased the earth pressure and displacement of the wall and increased drainage of water.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.181-186
• /
• 2006

An imaging method of seismic sources using time-reversal wave propagation is presented. The method is based on the time-reversal invariance and the spatial reciprocity of the wave equation. Time-reversal wave propagation has been used to image anomalous features of a midium in medical imaging, non destructive testing and waveform tomography. Seismogram is the record whose energy is propagated from the seismic source. If time-reversed seismogram propagates back into the medium, seismic energy is concentrated at the origin time of the event and at the source location. In this work, a staggered-grid finite-difference method of the elastic wave equation is parallelized for 3-D wave propagation simulation. With numerical experiments, we show that the time-reversal imaging will enable us to explore the spatio-temporal history of complex earthquake.

• Nuclear Engineering and Technology
• /
• v.41 no.3
• /
• pp.319-326
• /
• 2009

This study was carried out to investigate the high-acidity co-separation of Am and RE from a simulated radwaste solution by a solvent extraction using a mixture of Dimethyldibutyltetradecylmalonamide (DMDBTDMA, as an extractant) and dihexyl octanamide (DHOA, as a phase modifier) diluted with n-dodecane (NDD). All the experiments were conducted as a batch type. First, the environmentally friendly DMDBTDMA and DHOA composed of only CHON atoms were self-synthesized. Then, the conditions for the prevention of a third phase, generated in the organic phase were examined. In addition, the effects of the concentration of nitric acid, DHOA, oxalic acid and $H_2O_2$ on the co-extraction of Am and RE were elucidated. Consequently, the optimum condition of (0.5M DMDBTDMA+0.5M DHOA)/NDD-0.3M $C_2H_2O_4-4.5M$ $HNO_3$ and O/A=2 was obtained through experimental work. Under this condition, the extraction yields were found to be about 80% for Am, more than 70% for RE such as La, Eu, Nd, Ce, etc., 3% for Cs and Sr, 69% for Fe and less than 11% for Mo and Ru. For the co-extraction of Am and RE, Fe should be removed in advance or prevented from a co-extraction with Am by controlling the different extraction rates of Am and Fe. About 95% of the Am and RE in the organic phase were stripped using a 0.5M $HNO_3$.

• Journal of the Korean earth science society
• /
• v.30 no.3
• /
• pp.354-365
• /
• 2009

In this research, we investigated the support system and professional development in teaching practices of beginning science teachers through instructional consulting. Using open-ended interviews with the participating teachers and group discussions taking place on a regular basis to analyze and compare classes of six beginning teachers, we analyzed beginning teachers' professional development efforts centering around their teaching practices. The group discussion consisted of 6 beginning teachers and another 6 experienced teachers, they discussed and cross-analyzed beginning teachers' 9th lessons on middle school science unit, 'Work and Energy.' The characteristics of beginning science teachers' professional development drawn from this research are: (1) beginning teachers' teaching practices they were taught, (2) lack of reflection on their teaching practices, (3) no guidance for beginning teachers regarding ways to teach, (4) lack of communication between teachers about teaching science, and (5) lack of time for instructional preparation due to other heavy workload. Suggestions for ways to improve and support beginning teachers' professional development are discussed with experienced teachers. Required conditions for an effective induction program are also discussed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.2
• /
• pp.249-257
• /
• 2006

In this work, the adsorptive and desorptive behavior of reduced sulfur compounds (RSC) was investigated using the combination of the Peltier cooling (PC)/thermal desorption (TD) unit with the gas chromatographic (GC) detection technique. To examine the adsorptive characteristics of RSC on clothing materials, a total of nine experiments were conducted in a stepwise manner. Once small towel pieces are exposed to significant quantities of RSC standards with high concentrations (10 ppm), the desoprtion stage was then induced by deloading RSC with ultrapure $N_2$ at three different flow rates (FR) of 20, 40, and 60 mL/min. At each FR, the total deloading volume of 400, 800, and 1,600 mL were maintained. These results were then compared in terms of odoring efficiency by dividing the total amount of desorption with the total amount used for exposition or RSC loading. The results indicated that desorption reaction of certain compounds ($CH_3SH$ and DMS) can be influenced significantly with the reducing FR, while they are not affected directly by the total deloading volume. In addition, when the extent of adsorption was compared for most S compounds by the odoring efficiency term, the extent of absorption generally occurred at approximately 1/1000 level of original exposition.