• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.141-157
• /
• 2008

Since 1984, block-type reinforced earth wall with geogrid reinforcement has been widely used for retaining wall applications till now in Korea. The use of geogrid as a reinforcement in the reinforced earth wall is steadily increased in an amount over $6,500,000m^2$ in a year. However, still need exists that some problems in design and construction practices should be made to review. Therefore, this paper reviewed current state and development items of geosynthetics-reinforced earth wall technology on design and construction point of view.

• 한국안전학회지
• /
• 제12권3호
• /
• pp.139-146
• /
• 1997

In this study, centrifugal model tests were performed to investigate the behavior of excavated earth retaining wall with the depth of excavation and different types of wall(aluminum, steel panel). Jumunjin standard sand was used for foundation soil. The raining method was adopted to form the required relative density of the model ground. The lateral earth pressure measured from tests were compared with estimated active earth pressure by Rankine's theory. The test results have shown that the earth pressure acting on the retaining wall and the rotation displacement of the wall are influenced by the depth of excavation and the type of wall. It was found from the test results that the deformation of the wall increases with the depth of excavation.

• 기술발표회
• /
• 통권2006호
• /
• pp.156-161
• /
• 2006

Recently, construction of soil-reinforced segmental retaining walls which used geosynthetics are being increased day by day due to its construction efficiency, economic efficiency, and its aesthetic view. The conventional reinforced earth retaining wall has the connector system to fix the reinforcement and block However, this system may cause the crack of block and the rupture of reinforcement due to the stress concentration near the face of reinforced earth retaining wall In this study, the new connector system, which is able to allow the settlement of reinforcement, was applied to analyze the effect of connector system of reinforced earth retaining wall The connection strength tests and centrifugal tests for both the conventional reinforced earth retaining wall and the settlement reinforced earth retaining wall were performed to compare the results

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.457-464
• /
• 1999

The active earth pressure on the retaining wall is reduced by 3-Dimensional effects of the ground. Therefore, the test was focused on reducing the earth pressure on the retaining wall by inserting the vertical reinforcement in the backfill ground to develope the 3-Dimensional effects. Model tests in sand were peformed to measure the 3-Dimensional effects of the vertical reinforcement on the active earth pressure and its distribution and results were compared with the theories. The size of the vertical reinforcement, the geometry of the backfill space, and the wall friction of vertical reinforcement were varied. It was observed that the active earth pressure and its distribution on the underground structure were affected by the size of the vertical reforcements and wall friction.

• 기술발표회
• /
• 통권2006호
• /
• pp.162-171
• /
• 2006

Segmental Grid Retaining Wall is one of the segmental grid retaining walls using headers and stretchers to establish the framework of the wall In this method, grids formed by the intersection of headers and stretchers are generally filled with the gravel to maintain the weight of the wall Therefore, the construction can be carried out with higher speed and much economically when compared with the concrete retaining wall Furthermore, it has high drain capacity, and environmentally friendly aspects also have been pointed out because the possibility of the planting at the front of the wall However, in the segmental grid retaining wall method, the relative movement between the individual headers and stretchers was generally recognized, and stress redistribution in the gravel filling was also observed when subjected to the external loading and self-weight of filling Therefore, it has been thought that the distribution of the earth pressure in the segmental grid retaining wall system differ from that of the concrete retaining wall In this study, the surcharge tests using the scaled model segmental grid retaining wall was carried out to observe the distribution of the earth pressure in the segmental grid retaining wall The earth pressure was measured in the six specified height of wall, and the distribution of the pressure was analyzed. Furthermore, the earth pressure by computation or by the test using the concrete retaining wall was also considered to make comparison

• 한국지반공학회지:지반
• /
• 제14권5호
• /
• pp.17-28
• /
• 1998

사질토 지반에 시공된 앵커토류벽의 설 설계하중을 결정함으로서 토류벽의 설계에 있어 가장 기본적이고 필수적인 요소택에 있다. 앵커토류벽에 작용하는 토압분포는 배성, 흙의 아칭 효과 등에 따라 크게 변하 토류벽에 작용하는 토압분포의 가정은 크 한 직사각형 분포의 겉보기토압이 적용되 본 연구에서는 실물크기의 앵커토류 Function을 이용하여 토류벽에 작용하는 토압분포를 시공단계별로 산정하여 설계에 이용되는 토압 분포와 비교하였다. 또한 앵커 토류벽의 설계에 적용되는 Rankine 토압분포를 이용하는 Canadian Geotechnical Society 방법과 TerBaghi와 Peck이 제안한 겉보기토압을 이용한 설계방법을 현장시험 결과와 비교하여 분석하였다. 본 연구의 결론으로는 앵커 설계하중, 최대 휨모멘트의 산정 방법에 있어 30% 정도의 안전율을 고려할 때 Tereaghi 와 Peck 토압을 이용한 단순보 힌지법이 Rankine의 주동토압보다 적합하다는 사실을 입증하였다.

• 한국지반환경공학회 논문집
• /
• 제7권5호
• /
• pp.41-48
• /
• 2006

Crib wall은 헤더와 스트레처를 사용하여 옹벽의 골조를 축조하는 격자형 조립식 옹벽공법의 일종이다. 이 공법에서는 부재의 교차에 의해 생긴 격자 안에 자갈로 채움을 실시하여 옹벽의 중력을 유지하게 된다. 따라서 일반 옹벽에 비해 시공속도가 빠르며 경제적이다. 더불어, 옹벽의 배수 능력이 뛰어나며, 전면에 식생이 가능하다는 점을 들어 환경친화적인 장점도 강조되어 왔다. 그러나 Crib wall 시스템에서는 개별 부재 사이의 상대적인 움직임을 허용하며 채움재의 자중이나 외부하중에 의해 채움재에 응력 재분포가 발생한다. 이 때문에 콘크리트 옹벽과 같은 일체식 옹벽과는 토압의 분포에 있어 차이가 있다는 사실이 인식되어 왔다. 따라서 본 연구에서는 Crib wall의 토압특성을 관찰하기 위하여 축소된 모형을 이용한 재하시험을 실시하였다. 토압 특성은 6개의 특정한 높이에서 계측되었으며 이를 이용하여 위치별 토압의 분포 형태를 예측하였다. 시험결과는 기존의 이론식 및 일체식 옹벽과 비교되었으며 차이점에 대해 고찰하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.117-124
• /
• 2000

As the reinforced earth wall is constructed with step by step backfill compaction method, the accumulative horizontal deformation is inevitable. It has been reported that about 80% of horizontal deformation is occurred during the construction stage of reinforced earth retaining wall. To reduce the horizontal deformation, an isolated-reinforced earth wall method(KOESWall system) was newly developed. In this system, the reinforced earth is constructed first with reinforcements and backfills only, and then facing blocks are installed after the horizontal displacement of reinforced earth is fully occurred. To evaluate the effect of a construction method and the performance of KOESWall system, two cases of full scale field performance was monitored during and after the construction stages.

• 한국농공학회지
• /
• 제28권2호
• /
• pp.63-73
• /
• 1986

The model was developed by applying the principles of Bacot and Vidal to measure the behavior of deformation of the reinforced earth wall, and various tasts were performed by using the plastic fabric filter and the galvanized steel plate as a strip. The results obtained are as follows; 1. When the reinforced earth wall is deformed by the load, the strip is completely reinforced by the backfill materials and changed to the rigid block state, under the state of failure which permits sliding only, the next theoretical equation is formed. (H/L) . tan$\theta$ [cosO-sinOtanO] =2sinO[tan($\theta$ +0) +tanO] 2.The degree of the mutual reinforcement of the backfill material and the strip depend on the physical characteristics of the each material especially the angle of shearing resistance of the backfill material is desirable over 20$^{\circ}$ and, if it is over 400, its function could be a maximum. 3.The distribution of the maximum tensile strain of the reinforcement is changing with the height of reinforced earth wall, and when the height from bottom of the reinforced earth wall is 1.85 to 3. 35m, the maximum tensile strain appears at 2m from the skin element. The maximum tensile strain is increased by the depth of the reinforced earth wall from surface, and increased with the lapse of time after construction. 4.The failure surface of the reinforced earth wall by the concrete skin was about 60$^{\circ}$and the failure behavior of the reinforced earth wall in which the fabric filter was buried was slow, and so the pore pressure could be decreased. 5.It is possible to construct the fabric retained earth wall by the plastic fabric filter only. And the reinforcing effect between the steel plate and the plastic fabric filter is not largely different. however, in the aspect of the economic durability, the plastic fabric filter is more advantageous. 6.The reinforcing action mainly depends on the width and the length of the reinforcing materials, if possible, the full width is advantageous to enlarge the contact area with backfill. but considering the economic aspect, it is neccessary to develop the method controlling the space of the strip.

• 한국지반공학회논문집
• /
• 제33권11호
• /
• pp.59-72
• /
• 2017

본 연구에서는 사질토 뒷채움재의 캔틸레버 옹벽에서 뒷굽 끝단 연직면에 작용하는 주동토압을 산정하는 방법을 제안하였다. 캔틸레버 옹벽에서 뒷굽길이에 따른 전단 영역의 변화는 벽체의 벽마찰력, 뒷채움 경사에 따라 뒷굽 끝단 연직면에 작용하는 주동토압에 영향을 준다. 뒷굽길이에 따라 변하는 파괴면각도를 가정하여 토압을 산정하는 한계평형법은 적용하기에 매우 복잡하므로 본 연구에서는 한계해석법을 사용하여 토압을 구하였다. 한계해석법으로 뒷굽길이에 따라 실제 파괴면각도가 고려된 토압을 정확히 산정하고, 이로부터 뒷굽 끝단 연직면에 작용하는 수평토압과 연직토압을 분석하였다. 본 연구결과에 의하면, 뒷굽길이가 짧아짐에 따라 내측 파괴면 경사각은 이론식보다 증가한 반면에 외측 파괴면 경사각은 영향을 받지 않았다. 뒷굽 끝단의 연직면에 작용하는 배면마찰각은 지표면 경사각과 벽면마찰각 사이의 값을 나타내었으며, 주동토압 또한 감소하였다. 최종적으로 상대적인 뒷굽길이와 뒷굽 끝단의 연직면에 작용하는 마찰각(연직토압/수평토압의 비)의 상관관계를 사용함으로써 Coulomb 토압을 간편하게 산정할 수 있도록 하였다.