• Korean Journal of Construction Engineering and Management
• /
• v.20 no.4
• /
• pp.114-125
• /
• 2019

Off-Site Construction (OSC) is a new construction method based on factory production. OSC (Off-Site Construction) is a new construction method based on factory production. Researches such as OSC-related design and production standardization, transport methods are actively conducted in the U.S., UK and other parts of the world as this new method has an edge over existing methods in terms of productivity, economy and quality. As the emergence of this new area requires reasonable management, an analysis of the scope of construction project management is required accordingly. Therefore, this research analyzed the study trends and relationships at the CM/PM range's "Operation level" to identify areas of study, relationship between studies and deficiencies in current research. This study carried out a comprehensive literature review of the OSC (CM/PM) research by analyzing 94 papers in Operation level as of September 3, 2018, and the analysis results are as follows. (1) Working stage level researches have been increasing rapidly since 2006. (2) Non-volumetric type is contributing most significantly at work stage level. In the building sector, it has been identified that problems such as residential: living, quality issues, non-residential: economic difficulties, factory: productivity problems have been addressed. (4) The Non-volumetric pre-assembly type dealt with the economic feasibility of residential and non-residential buildings, whereas the modular type was studied in regards to assembly quality. (5) From 2006, project management areas (e.g., quality, human resources, risks) have been expanded. It is expected that this research will help find new areas of research for OSC. If the analysis is carried out to the level of the industrial, corporate and project phases in the future, it is deemed that the overall research flow and area of the OSC industry can be identified.

• The Korean Journal of Archival Studies
• /
• no.1
• /
• pp.23-76
• /
• 2000

In this paper, I examined what have been researched and determined about preservation strategy and selection of preservation media in the western archival community. Archivists have primarily been concerned with 'preservation' and 'use' of archival materials worth of being preserved permanently. In the new information era, preservation and use of archival materials were faced with new challenge. Life expectancy of paper records was shortened due to acidification and brittleness of the modem papers. Also emergence of information technology affects the traditional way of preservation and use of archival materials. User expectations are becoming so high technology-oriented and so complicated as to make archivists act like information managers using computer technology rather than traditional archival handicraft. Preservation strategy plays an important role in archival management as well as information management. For a cost-effective management of archives and archival institutions, preservation strategy is a must. The preservation strategy encompasses all aspects of archival preservation process and practices, from selection of archives, appraisal, inventorying, arrangement, description, conservation, microfilming or digitization, archival buildings, and access service. Those archival functions should be considered in their relations to each other to ensure proper preservation of archival materials. In the integrated preservation strategy, 'preservation' and 'use' should be combined and fulfilled without sacrificing the other. Preservation strategy planning is essential to determine the policies of archives to preserve their holdings safe and provide people with a maximum access in most effective ways. Preservation microfilming is to ensure permanent preservation of information held in important archival materials. To do this, a detailed standardization has been developed to guarantee the permanence of microfilm as well as its product quality. Silver gelatin film can last up to 500 years in the optimum storage environment and the most viable option for permanent preservation media. ISO and ANIS developed such standards for the quality of microfilms and microfilming technology. Preservation microfilming guidelines was also developed to ensure effective archival management and picture quality of microfilms. It is essential to assess the need of preservation microfilming. Limit in resources always put a restraint on preservation management. Appraisal (and selection) of what to be preserved was the most important part of preservation microfilming. In addition, microfilms with standard quality can be scanned to produce quality digital images for instant use through internet. As information technology develops, archivists began to utilize information technology to make preservation easier and more economical, and to promote use of archival materials through computer communication network. Digitization was introduced to provide easy and universal access to unique archives, and its large capacity of preserving archival data seems very promising. However, digitization, i.e., transferring images of records to electronic codes, still, needs to be standardized. Digitized data are electronic records, and st present electronic records are very unstable and not to be preserved permanently. Digital media including optical disks materials have not been proved as reliable media for permanent preservation. Due to their chemical coating and physical character using light, they are not stable and can be preserved at best 100 years in the optimum storage environment. Most CD-R can last only 20 years. Furthermore, obsolescence of hardware and software makes hard to reproduce digital images made from earlier versions. Even if when reformatting is possible, the cost of refreshing or upgrading of digital images is very expensive and the very process has to be done at least every five to ten years. No standard for this obsolescence of hardware and software has come into being yet. In short, digital permanence is not a fact, but remains to be uncertain possibility. Archivists must consider in their preservation planning both risk of introducing new technology and promising possibility of new technology at the same time. In planning digitization of historical materials, archivists should incorporate planning for maintaining digitized images and reformatting them in the coming generations of new applications. Without the comprehensive planning, future use of the expensive digital images will become unavailable. And that is a loss of information, and a final failure of both 'preservation' and 'use' of archival materials. As peter Adelstein said, it is wise to be conservative when considerations of conservations are involved.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.5
• /
• pp.587-609
• /
• 2019

Short-and long-term stabilities of bentonite, favored material as buffer in geological repositories for high-level waste were reviewed in this paper in addition to alternative design concepts of buffer to mitigate the thermal load from decay heat of SF (Spent Fuel) and further increase the disposal efficiency. It is generally reported that the irreversible changes in structure, hydraulic behavior, and swelling capacity are produced due to temperature increase and vapor flow between $150{\sim}250^{\circ}C$. Provided that the maximum temperature of bentonite is less than $150^{\circ}C$, however, the effects of temperature on the material, structural, and mineralogical stability seems to be minor. The maximum temperature in disposal system will constrain and determine the amount of waste to be disposed per unit area and be regarded as an important design parameter influencing the availability of disposal site. Thus, it is necessary to identify the effects of high temperature on the performance of buffer and allow for the thermal constraint greater than $100^{\circ}C$. In addition, the development of high-performance EBS (Engineered Barrier System) such as composite bentonite buffer mixed with graphite or silica and multi-layered buffer (i.e., highly thermal-conductive layer or insulating layer) should be taken into account to enhance the disposal efficiency in parallel with the development of multilayer repository. This will contribute to increase of reliability and securing the acceptance of the people with regard to a high-level waste disposal.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.427-437
• /
• 2020

Manganese nodules, which are evaluated as potential metal resources, have been found in the Arctic Ocean as well as in the abyssal plains of the Pacific and Indian Oceans. Manganese nodules exhibit strong variations in the morphology, internal texture, chemical composition and mineralogy as they grow. The relationship between the texture and chemical elemental composition during the growth process is well documented, but the mineral composition variation during the growth process is not. Because the manganese oxide minerals in nodules are fine-grained and poorly crystalline, quantitative analysis for the mineral composition is challenging for the bulk nodule sample. This study investigated the internal texture and Mn-oxide mineral composition of manganese nodules obtained from the East Siberian Sea. Semi-quantitative analysis was attempted for three main Mn-oxide minerals constituting the manganese nodules (i.e., todorokite, buserite and birnessite) using the peak area ratio of X-ray diffraction analysis graphs. In the East Siberian Sea manganese nodules, birnessite is more abundant than buserite or todorokite, and no correlation is found between the mineral composition and the internal texture. Instead a correlation is found between the relative content of todorokite and the lamellae depth. The todorokite content tends to increase from the surface to the core of the nodules, which can be attributed to a recrystallization process or difference in the growth rate within the nodule. This study shows that semi-quantitative analysis of manganese oxide minerals using the peak area ratio is useful in the mineralogical study of manganese nodules.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.52-61
• /
• 2011

Whereas recent researches have elucidated the positive ecological roles of large wood (LW) in fishbearing channels, LW is also recognized as a negative factor of log-laden debris flows and floods in densely populated areas. However in Republic of Korea, no study has investigated longitudinal variations of LW distribution and dynamic along the stream corridor. Hence to elucidate 1) physical factors controlling longitudinal distribution of LW and 2) their effect on variation in LW load amount, we surveyed the amount of LW with respect to channel morphology in a mountain stream, originated from Mt. Ki-ryong in Inje, Gangwondo. Model selection in the Generalized Linear Model procedure revealed that number of boulder (greater than or equal to 1.0 m in diameter), bankfull channel width and their interaction were the best predictors explaining LW load volume per unit channel segment area (unit LW load). In general, boulders scattered within small mountain streams influence LW retention as flow obstructions. However, in this study, we found that the effect of the boulders vary with the channel width; that is, whereas the unit LW load in the segment with narrow channel width increased continuously with increasing boulder number, it in the segment with wide channel width did not depend on the boulder number. This should be because that, in two channels having different widths, the rates of channel widths reduced by boulders are different although boulder numbers are same. Our findings on LW load varying with physical factors (i.e., interaction of boulder number and channel width) along the stream corridor suggest understanding for longitudinal continuum of hydrogeomorphic and ecologic characteristics in stream environments, and these should be carefully applied into the erosion control works for systematic watershed management and subsequent disaster prevention.

• 한국노년학
• /
• v.37 no.1
• /
• pp.55-82
• /
• 2017

The purpose of this research is to provide implications for the development of age-friendly industry of Korea by analyzing the age-friendly industry activation policy suggested by the Presidential Committee on Ageing Society and Population Policy in response to the population ageing problems. Policy and theoretical implications are derived from an analysis of age-friendly industry activation policy as directly related to the improvement of the three major problems (i.e. health, economy, and loneliness) of Korean older people. This analysis focuses on its specific content, common and core logic, and the validity of the logic. The results show that: 1)the first Plan for Ageing Society and Population suggests a policy for improving poverty, 2)the second Plan for Ageing Society and Population suggests a policy for improving health, and 3)the third Plan for Ageing Society and Population suggests a policy for improving health and loneliness. All policies not only are commonly based on the logically limited concepts of successful ageing and active ageing, but also are characterized by narrow realm, insufficient content, and fragmented policy. The results result in the following policy implications: 1)the age-friendly industry activation policy should be developed with continuity, sufficiency, and diversity, 2)lessons from the limitation related with the de-contextualisation of successful ageing and its elective affinity with consumer capitalism, 3)lessons from the prevention-oriented perspective of active ageing, and 4)lessons from the social characteristics of (non-)psychological resources, limitation of the reablement related with social investment state. The analyses also provide a theoretical implication that a different perspective on the social construct of ageing is needed beyond the dichotomy of ageing based on modelling ageing. Lastly, the paper suggests not only the limitation of the research but also the preferred follow-up studies regarding age-friendly industry activation policy.

• (The)Study of the Eastern Classic
• /
• no.69
• /
• pp.115-146
• /
• 2017

This paper is about the research on ontology design for a digital archive of seonsaengan(先生案) of the Joseon Period. Seonsaengan is the register of staff officials at each government office, along with their personal information and records of their transfer from one office to another, in addition to their DOBs, family clan, etc. A total of 176 types of registers are known to be kept at libraries and museums in the country. This paper intends to engage in the ontology design of 47 cases of such registers preserved at the Jangseogak Archives of the Academy of Korean Studies (AKS) with a focus on their content and structure including the names of the relevant government offices and posts assumed by the officials, etc. The work for the ontology design was done with a focus on the officials, the offices they belong to, and records about their transfers kept in the registers. The ontology design categorized relevant resources into classes according to the attributes common to the individuals. Each individual has defined a semantic postposition word that can explicitly express the relationship with other individuals. As for the classes, they were divided into eight categories, i.e. registers, figures, offices, official posts, state examination, records, and concepts. For design of relationships and attributes, terms and phrases such as Dublin Core, Europeana Data Mode, CIDOC-CRM, data model for database of those who passed the exam in the past, which are already designed and used, were referred to. Where terms and phrases designed in existing data models are used, the work used Namespace of the relevant data model. The writer defined the relationships where necessary. The designed ontology shows an exemplary implementation of the Myeongneung seonsaengan(明陵先生案). The work gave consideration to expected effects of information entered when a single registered is expanded to plural registers, along with ways to use it. The ontology design is not one made based on the review of all of the 176 registers. The model needs to be improved each time relevant information is obtained. The aim of such efforts is the systematic arrangement of information contained in the registers. It should be remembered that information arranged in this manner may be rearranged with the aid of databases or archives existing currently or to be built in the future. It is expected that the pieces of information entered through the ontology design will be used as data showing how government offices were operated and what their personnel system was like, along with politics, economy, society, and culture of the Joseon Period, in linkage with databases already established.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.802-811
• /
• 2023

Marine spatial planning (MSP) is a crucial element for rational allocation and sustainable use of marine areas. Particularly, Fishing Activity Protected Areas constitute essential zones accounting for 45.6% designated for sustainable fishing activities. However, the current assessment of these zones does not adequately consider future demands and potential values, necessitating appropriate evaluation methods and predictive tools for long-term planning. In this study, we selected key fish species (Scomber japonicus, Trichiurus lepturus, Engraulis japonicus, and Larimichthys polyactis) within the Fishing Activity Protected Area to predict their distribution and compare it with the current designated zones for evaluating the ability of the prediction tool. Employing the Intergovernmental Panel on Climate Change (IPCC) 6th Assessment Report scenarios (SSP1-2.6 and SSP5-8.5), we used species distribution models (such as MaxEnt) to assess the movement and distribution changes of these species owing to future variations. The results indicated a 30-50% increase in the distribution area of S. japonicus, T. lepturus, and L. polyactis, whereas the distribution area of E. japonicus decreased by approximately 6-11%. Based on these results, a species richness map for the four key species was created. Within the marine spatial planning boundaries, the overlap between areas rated "high" in species richness and the Fishing Activity Protected Area was approximately 15%, increasing to 21% under the RCP 2.6 scenario and 34% under the RCP 8.5 scenario. These findings can serve as scientific evidence for future evaluations of use zones or changes in reserve areas. The current and predicted distributions of species owing to climate change can address the limitations of current use zone evaluations and contribute to the development of plans for sustainable and beneficial use of marine resources.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.431-437
• /
• 2023

This study evaluated the ecological characteristics related to spike heading time of three Korean foxtail millet cultivars, i.e., one early and two late maturities, and a finger millet cultivar in the north-central region of the Korean Peninsula, Kangwon Province. The changes in heading time occurred due to the changes in planting time from mid-May to late June. The heading time of the early-maturity cultivars was early August, with 80 days required for heading (DH) for the mid-May planting; late August, with 65 DHs for the late June planting; and mid-late August, with 100 DHs and mid-October, with 65 DHs, respectively, for the late-maturity cultivars. The accumulated temperature at heading time ranged from 1,700℃ of mid-May planting to 1,500℃ of late June planting in the early-maturity cultivars. In contrast, it ranged from 2,100℃ to 1,900℃ in the late-maturity cultivars. The photoperiod at heading time ranged from 14.0 h to 13.2 h in the early-maturity cultivars, whereas it was from 13.2 h to 12.5 h in the late-maturity cultivars. Considering that the limiting heading time of Korean foxtail millet and finger millet in the northern region of Kangwon Povince is late August, the limiting accumulated temperature at the heading time was evaluated to be approximately 1,500℃ and 2,000℃ for early and late-maturity cultivars, respectively. The mean daily temperature from planting to heading time showed a negative correlation with the DH, which was shortened with the increase in mean daily temperature. This suggests that delaying the planting time from May to June in the north-central region of the Korean Peninsula increases the mean daily temperature during vegetative growth periods, resulting in the decrease of the DH and the accumulated temperature.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.3
• /
• pp.191-199
• /
• 2007

Seasonal variation in species composition of fish in the Saemangeum Reservoir was determined using seasonal samples collected by an otter trawl from April 2006 to February 2007 after the dike construction, and compared with the data obtained during the dike construction in 2001-2002. A total of 35 species, 8,960 individuals and 53,084.4 g of fish were collected during the study. Of the fish collected, brackish and coastal fishes such as Konosirus punctatus, Synechogobius hasta and Repomucenus lunatus, and migrant fishes such as Engraulis japonicus and Scomberomorus niphonius predominated in abundance accounting for 95% in the total number of individuals. Fish species composition and abundance showed a similar seasonal trend to those in the other western coastal waters of Korea. The resident species were mainly collected in spring and in autumn. The number of species and biomass were high in summer by the large amount of catch of migrating species. Catch was low in winter and only 2 species were collected. A brackish and coastal fish, K. punctatus and two migrant fishes, E. japonicus and S. niphonius were abundantly collected after the dike construction. However, the dominant fishes during the dike construction such as Leiognathus nuchalis, Neosalanx jordani and Chaeturichthys stigmatias were rarely collected. Fish density was $1,149\;inds./10,000m^2\;and\;12,644g/10,000m^2$ during the dike construction, and increased 6 times in the number of individuals ($7,467\;inds./10,000m^2$) and 3 times in biomass ($44,237g/10,000m^2$) after the dike construction. Annual species richness (R) and species diversity (H') decreased from R=0.0160 and H'=2.47 during the dike construction in 2001-2002 to R=0.0038 and H'=1.11 after dike construction in 2006-2006, respectively. These changes seemed to be related to the reduction of the saline area and degradation of water quality in Semangeum Reservoir after the dike construction.