• Journal of Electrochemical Science and Technology
• /
• v.1 no.1
• /
• pp.39-44
• /
• 2010

1.5 V and 3.0 V-class film-type primary batteries were designed for radio frequency identification (RFID) tag. Efficient fabrication processes such as screen-printings of conducting layer ($25{\mu}m$), active material layer ($40{\mu}m$ for anode and $80{\mu}m$ for cathode), and electrolyte/separator/electrolyte layer ($100{\mu}m$), were adopted to give better performances of the 1.5 V-class film-type Leclanch$\acute{e}$ primary battery for battery-assisted passive (BAP) RFID tag. Lithium (Li) metal is used as an anode material in a 3.0 V-class film-type $MnO_2||$Li primary battery to increase the operating voltage and discharge capacity for application to active sensor tags of a radio frequency identification system. The fabricated 3.0 V-class film-type Li primary battery passes several safety tests and achieves a discharge capacity of more than 9 mAh $cm^{-2}$.

• Journal of Fashion Business
• /
• v.18 no.3
• /
• pp.73-90
• /
• 2014

Paper, once known and used only as a medium for printing or handicrafts, is now being used in new fields including artistic clothing, and an environment-friendly material for fashion, while the functionality of its formative characteristics and esthetics have been newly highlighted. On this basis, this study performed a content analysis of paper couture and categorization of types of paper modeling techniques based on 904 paper couture submitted to paper fashion shows, exhibitions and contest exhibits from 2001 to 2013. Analysis results showed that paper textile types were most common at 86.64%, while techniques using laminating, bonding, overlapping or paper as-is represented 62.17%. Expressive techniques in which paper was cut or torn and attached to paper clothing was 11.62%, paper folding was 5.75%, drawing and coloring 4.65%, and finally, paper cutting was 2.65%. Meanwhile, among paper modeling techniques using paper yarn textiles, a paper weaving technique was 6.75%. Moreover, other techniques in which paper modeling techniques or subsidiary clothing was blended were 3.65%, and Dak peeling textiles were 1.33%. Paper paste moulding textiles types represented 1.44%, above all papier $m{\hat{a}}ch{\acute{e}}$ techniques of 0.55% and creasing and holding techniques were 0.88%. Paper is sufficient to express the artists' creativity as well as having qualities as an artistic medium, such as variability through combined use with other materials, variation in form, suitability for reuse of waste paper, and environmental friendliness. Also, various paper modeling techniques can be blended with textiles for a generalized technology that overcomes the limits of paper and textiles.

• Journal of Convergence for Information Technology
• /
• v.9 no.10
• /
• pp.9-15
• /
• 2019

Recently, in the field of next-generation e-commerce and finance, interest in blockchain-based technologies such as Bitcoin and Ethereum is great. Although the security of blockchain technology is known to be secure, hacking incidents / accidents related to cryptocurrencies are being issued. The main causes were vulnerabilities in the external environment, such as taking over login sessions on cryptocurrency wallets, exposing private keys due to malware infection, and using simple passwords. However, private key management recommends general methods such as utilizing a dedicated application or local backup and physical archiving through document printing. In this paper, we propose a white box password-based private key protection scheme. As a result of safety and performance analysis, we strengthened the security against vulnerability of private key exposure and proved the processing efficiency of existing protocol.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.1-10
• /
• 2020

This paper reviews the recent development of electronic textile technology, mainly focusing on chip-textile bonding. Before the chip-textile bonding, a circuit on the textile should be prepared to supply the electrical power and signal to the chip mounted on the fabrics. Either embroidery with conductive yarn or screen-printing with the conductive paste can be applied to implement the circuit on the fabrics depending on the circuit density and resolution. Next, chip-textile bonding can be performed. There are two choices for chip-textile bonding: fixed connection methods such as soldering, ACF/NCA, embroidery, crimping, and secondly removable connection methods like a hook, magnet, zipper. Following the chip-textile bonding process, the chip on the textile is generally encapsulated using PDMS to ensure reliability like water-proof.

• International Journal of Computer Science & Network Security
• /
• v.21 no.2
• /
• pp.212-220
• /
• 2021

The objectives of this research were to identify the digital competencies required for information science specialists at Saudi universities and to examine whether there existed conspicuous differences in the standpoint of these specialists due to years of work experience with regard to the importance of these competencies. A descriptive analytical method was used to accomplish these objectives while extracting the required digital competency list and ascertaining its importance. The research sample comprised 24 experts in the field of information science from several universities in the Kingdom of Saudi Arabia. The participants in the sample were asked to complete a questionnaire prepared to acquire the pertinent data in the period between January 5, 2021 and January 20, 2021. The results reveal that the digital competencies required for information science specialists at Saudi universities encompass general features such as the ability to use computer, Internet, Web2, Web3, and smartphone applications, digital learning resource development, data processing (big data) and its sharing via the Internet, system analysis, dealing with multiple electronic indexing applications and learning management systems and its features, using electronic bibliographic control tools, artificial intelligence tools, cybersecurity system maintenance, ability to comprehend and use different programming languages, simulation, and augmented reality applications, and knowledge and skills for 3D printing. Furthermore, no statistically significant differences were observed between the mean ranks of scores of specialists with less than 10 years of practical experience and those with practical experience of 10 years or more with regard to conferring importance to digital competencies.

• Journal of Technologic Dentistry
• /
• v.46 no.2
• /
• pp.28-35
• /
• 2024

Purpose: To evaluate the three-dimensional trueness of upper and lower denture bases produced using a digital light processing (DLP) printer and immersed in a constant-temperature water bath. Methods: An edentulous model was prepared and fitted with denture bases and occlusal rims manufactured using base plate wax. After scanning the model, denture bases, and occlusal rims, complete denture designs were created. Using the designs and a DLP printer, 10 upper and 10 lower complete dentures were manufactured. Each denture was scanned before (impression surface of upper denture base before constant temperature water bath [UBC] and impression surface of lower denture base before constant temperature water bath [LBC] groups) and after (impression surface of upper denture base after constant temperature water bath [UAC] and impression surface of lower denture base after constant temperature water bath [LAC] groups) immersion in the constant-temperature water bath. Scanned files were analyzed by comparing reference and scanned data, with statistical analysis conducted using the Kruskal-Wallis test (α=0.05). Results: Statistical analysis revealed no significant differences between the UBC and LBC groups, nor between the UAC and LAC groups (p>0.05). However, significant differences were observed between the UBC and UAC groups and between the LBC and LAC groups, i.e., before and after the constant-temperature water bath for both maxillary and mandibular denture bases (p<0.05). Conclusion: Denture bases not immersed in the constant-temperature water bath (UBC and LBC groups) exhibited error values within 100 ㎛, whereas those immersed in the water bath (UAC and LAC groups) showed error values exceeding 100 ㎛.

• Journal of Cerebrovascular and Endovascular Neurosurgery
• /
• v.25 no.1
• /
• pp.19-27
• /
• 2023

Objective: The purpose of this study was to determine the efficacy of a 3D-printed aneurysm simulation model (3DPM) in educating patients and improving physicians' comprehension and performance. Methods: This prospective study involved 40 patients who were diagnosed with unruptured intracranial aneurysms (UIAs) and scheduled for surgical clipping or endovascular coiling and randomly divided into two groups (the 3DPM group and the non-3DPM group). The 3DPM was used in preoperative consultation with patients and intraoperatively referenced by surgeons. The patients, 7 neurosurgical residents, and 10 surgeons completed questionnaires (5-point Likert scale) to determine the usefulness of the 3DPM. Results: Patients in the 3DPM group had significantly higher scores in terms of their understanding of the disease (mean 4.85 vs. 3.95, p<0.001) and the treatment plan (mean 4.85 vs. 4.20, p=0.005) and reported higher satisfaction during consultation (5.0 vs. 4.60, p=0.036) than patients in the non-3DPM group. During patient consultation, 3DPMs were most useful in improving doctor-patient communication (mean 4.57, range 4-5). During clipping surgery, the models were most useful in assessing adjacent arteries (mean 4.9, range 4-5); during endovascular coiling, they were especially helpful in microcatheter shaping (mean 4.7, range 4-5). Conclusions: In general, 3DPMs are beneficial in educating patients and improving the physician's performance in terms of surgical clipping and endovascular coiling of UIAs.

• Journal of Intelligence and Information Systems
• /
• v.22 no.1
• /
• pp.119-138
• /
• 2016

Since the Industrial Revolution, which made the mass production and mass distribution of standardized goods possible, machine-made (manufactured) products have accounted for the majority of the market. However, in recent years, the phenomenon of purchasing even more expensive handmade products has become a noticeable trend as consumers have started to acknowledge the value of handmade products, such as the craftsman's commitment, belief in their quality and scarcity, and the sense of self-esteem from having them,. Consumer interest in these handmade products has shown explosive growth and has been coupled with the recent development of three-dimensional (3D) printing technologies. Etsy.com is the world's largest online handmade platform. It is no different from any other online platform; it provides an online market where buyers and sellers virtually meet to share information and transact business. However, Etsy.com is different in that shops within this platform only deal with handmade products in a variety of categories, ranging from jewelry to toys. Since its establishment in 2005, despite being limited to handmade products, Etsy.com has enjoyed rapid growth in membership, transaction volume, and revenue. Most recently in April 2015, it raised funds through an initial public offering (IPO) of more than 1.8 billion USD, which demonstrates the huge potential of online handmade platforms. After the success of Etsy.com, various types of online handmade platforms such as Handmade at Amazon, ArtFire, DaWanda, and Craft is ART have emerged and are now competing with each other, at the same time, which has increased the size of the market. According to Deloitte's 2015 holiday survey on which types of gifts the respondents plan to buy during the holiday season, about 16% of U.S. consumers chose "homemade or craft items (e.g., Etsy purchase)," which was the same rate as those for the computer game and shoes categories. This indicates that consumer interests in online handmade platforms will continue to rise in the future. However, this high interest in the market for handmade products and their platforms has not yet led to academic research. Most extant studies have only focused on machine-made products and intelligent services for them. This indicates a lack of studies on handmade products and their intelligent services on virtual platforms. Therefore, this study used signaling theory and prior research on the effects of sellers' characteristics on their performance (e.g., total sales and price premiums) in the buyer-seller relationship to identify the key influencing e-Image factors (e.g., reputation, size, information sharing, and length of relationship). Then, their impacts on the performance of shops within the online handmade platform were empirically examined; the dataset was collected from Etsy.com through the application of web harvesting technology. The results from the structural equation modeling revealed that the reputation, size, and information sharing have significant effects on the total sales, while the reputation and length of relationship influence price premiums. This study extended the online platform research into online handmade platform research by identifying key influencing e-Image factors on within-platform shop's total sales and price premiums based on signaling theory and then performed a statistical investigation. These findings are expected to be a stepping stone for future studies on intelligent online handmade services as well as handmade products themselves. Furthermore, the findings of the study provide online handmade platform operators with practical guidelines on how to implement intelligent online handmade services. They should also help shop managers build their marketing strategies in a more specific and effective manner by suggesting key influencing e-Image factors. The results of this study should contribute to the vitalization of intelligent online handmade services by providing clues on how to maximize within-platform shops' total sales and price premiums.

• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.387-394
• /
• 2011

This study was performed to investigate the contents and leaching characteristics of hazardous wastes from the paint industry. In order to establish a hazardous waste list, samples from industrial discharge have been analyzed for 8 non-regulated inorganic hazardous substances (i.e., Sb, Ni, F, V, Ba, Zn, Be, Se). In more detail, hazardous waste samples from a total of 64 workplaces, e.g. manufacture, formulation, supply and use (MFSU) of coatings, adhesives, sealants and printing inks processing, have been chosen and analyzed. Contents and leaching tests for inorganic metal species in samples show that the non-regulated hazardous substances satisfy all the criteria, while quantitative analyses reveal that some samples of the discharged wastes exceeded the criteria proposed by NIER (National Instituted of Environmental Research). In conclusion, we expect the outcome of this study to align the classification system of hazardous waste management in South Korea with international legislations, and consequently contribute to reduce environmental pollution as well as health risks by toxic wastes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.156-158
• /
• 2021

An initial local government center received direct asking from citizens, wrote the documents by hand, and issued them. Later the appearance of computers, printers, and faxes made it possible to handle civil complaints through copying. Since 2010, as the e-government has started, entering civil service requests into computers after identification by themselves and printing the results has become established. In addition, with the introduction of unmanned administrative services, civil services become available in various places, which causes the increased satisfaction of citizens. One of the services is an unmanned civil service issuing machine, and more than 20 kinds of documents, including a copy of resident registration, can be issued directly. Of course, additional help may be needed if citizens are not familiar with the latest technologies. However, the unmanned civil service issuing machine is a highly satisfactory way in that it is less time-limited as citizens can visit a community center or city hall after the end of work. However, the main problem is that resident registration numbers and fingerprint recognition are required depending on the type of issuance, which increases the inconvenience of handling citizen complaints and is shunned. To solve this problem, we aim to study a method for improving the fingerprint recognition method of unmanned civil service issuing machines by expanding personal identification.