• Journal of Magnetics
• /
• 제18권4호
• /
• pp.487-493
• /
• 2013

The automotive industry is showing widespread interest in belt-driven electric motor-assisted (e-Assist) systems. A belt-driven assist system (BAS) starts and assists the combustion engine in place of the conventional generator. In this study, a water-cooled wound rotor synchronous motor (WRSM) for the e-Assist system was designed and analyzed. The performance of the WRSM was compared with that of an interior permanent magnet synchronous motor (IPMSM). The WRSM efficiency can be improved for the BAS by adjusting the field flux at high speeds. The field current map to obtain the maximum efficiency based on the speed and torque was developed. To control the field flux via field current control in the WRSM, a general H-bridge circuit was added to the WRSM inverter to get the rapid current response in the high-speed region; the characteristics were compared with the chopper circuit. A WRSM developed for the belt-driven e-Assist system and a prototype 115 V power electronic converter to drive the WRSM were tested with a 900 cc combustion engine. The test results showed that the WRSM-type e-Assist system had good characteristics and could successfully start and assist the 900 cc combustion engine.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1759-1764
• /
• 2005

Human Adaptive Mechatronics(HAM) is a new concept which was proposed in our university's research project sponsored by Japanese Ministry of Education, Sports, Culture, Science and Technology(MEXT), and is defined as "intelligent mechanical systems that adapt themselves to the user's skill under various environments, assist to improve the user's skill, and assist the human-machine system to achieve best performance". In this paper, the concept and key-items of HAM are mentioned. And the control strategy to realize a HAM human-machine system is explained in the case of physical-interface system, i.e. haptic system. The proposed assist-control of a force-feedback type haptic system includes online estimation of a operator's control characteristics, and a `force assist' function implemented as a change in the support ratio according to the identified skill level. We developed a HAM-haptic device test system, executed evaluation experiments with this apparatus, and analyzed the measured data. It was confirmed that the operator's skill could be estimated and that operator's performance was enhanced by the assist-control.

• Journal of Chest Surgery
• /
• 제53권6호
• /
• pp.368-374
• /
• 2020

Background: The extracorporeal ventricular assist device (e-VAD) system is designed for left ventricular support using a permanent life support console. This study aimed to determine the impact of temporary e-VAD implantation bridging on posttransplant outcomes. Methods: We reviewed the clinical records of 6 patients with the Interagency Registry for Mechanically Assisted Circulatory Support (INTERMACS) profile 1, awaiting heart transplantation, who were provided with temporary e-VAD from 2018 to 2019. The circuit comprised a single centrifugal pump without an oxygenator. The e-VAD inflow cannula was inserted into the apex of the left ventricle, and the outflow cannula was positioned in the ascending aorta. The median follow-up duration was 8.4±6.9 months. Results: After e-VAD implantation, lactate dehydrogenase levels significantly decreased, and Sequential Organ Failure Assessment scores significantly improved. Bedside rehabilitation was possible in 5 patients. After a mean e-VAD support duration of 14.5±17.3 days, all patients were successfully bridged to transplantation. After transplantation, 5 patients survived for at least 6 months. Conclusion: e-VAD may reverse end-organ dysfunction and improve outcomes in INTERMACS I heart transplant patients.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.27-27
• /
• 1998

진공기술의 응용과 진공환경의 이용은 더 이상 논하지 않더라도 산업 전반에 그 충요성이 점점 더 커가고 있다. 이러한 여건에도 불구하고 진공율 이용하는 system 개밟의 국산화는 수 입하는 system으$\mid$ 수에 비하여 절대적으로 부족하며, 또한 개발하는 system의 자동화는 거의 이 루어지지 않고 있으며, 자동화된 진공판련 system은 거의 대부분 수입에 의흔하고 있다. 실험 실 규모에서부터 System올 하나하나 개밭하고, 이톨 자동화하는 노력과 일이 진행됨다면 산업 응용에 있어서도 자연스럽게 자동화된 system으$\mid$ 개발이 이루어 질 것이다 .. system 자동화는 상 품수명의 단축과 이에 따른 다품종 소량을 요구하는 시장수요에 대응하고, 인력절감과 고풀짙 화로 생산성 향상의 요구에 대응하기 위하여 필요하다. 본 연 구에 서 는 e-beam evaporator로 evaporation하면 서 ion beam으로 assist하여 thin film율 제 작하는 IBAD vacuum system율 싫 계 및 제 작하고[1,2], PLC[3,떼톨 이 용하여 system 자동화톨 하였다 .. thin film 제작 process는 먼저 기본 진공상태로 만뚫고 난 뒤, e-beam evaporator로 e evaporation하면서 ion beam source로 assist하여 substrate 011 thin film율 제조한다 226;. thin film올 제 조하면서 thickness monitor로 sample의 thickness rate톨 control 하고, sample의 균얼성과 밀착 성을 고려하여 substrate톨 rotation 및 heating 할 수 있도록 싫계, 제작하였다. 양질의 박막올 제조하기 위해서 진공환경이 좋은 상태로 제공되어야 한다. 이톨 위하여 oil free operation 0 I 가 능한 dry pump와 turbo molecular pump로 고진공 배기 하였다. 진공도의 흑점은 thermal effect 툴 고려하여 cold cathode ion gauge률 사용하였고, intro chamber와 main chamber 사이에는 g gate valve톨 설치하여 벌도로 운용되도록 하였다. 이러한 process를 박막의 두께, 진공도, 시 간, 온도, 공정 동의 조건올 기훈으로 자동화한 것이다. 또한 정전과 단수에 대한 interlock 기능 도 고려하였다.하였다.

• 무역상무연구
• /
• 제33권
• /
• pp.277-308
• /
• 2007

Northeast Asia Nations introduced each single window system for simplifying the customs clearance procedures in order to prevent the rekeying the customs and trade-related data. A single window is a means for enabling users to complete all the necessary import/export procedures in a single input and by single transmission by linking the related system. WCO recommends CDM, UCR, ACI that completed by WCO's own projects for assist to establish the single window for customs clearance. Northeast Asia Nations such as Korea, China, Taiwan, Japan undertook trade process reengineering for introducing single window for customs clearance. Korea and Japan introduced a e-customs systems as a good single window system. The purpose of this paper is to contribute to construction of the efficient single window system for customs clearance by studying e-customs cases in Northeast Asia Nations.

• 한국컴퓨터정보학회논문지
• /
• 제20권11호
• /
• pp.39-46
• /
• 2015

In this paper, we propose a performance-aware workload model for efficient implementation of control systems. When implementing a control algorithm as an embedded computer system, the control code executes periodically. For such systems, its control performance depends on not only the accuracy of the control algorithm itself but also temporal parameters such as control period and sensing to actuation delay. In this regard, this paper studies the relation between control period and delay by measuring and analyzing the control performance of LKAS (Lane Keeping Assist System) with varying period and delay combinations. Through this experimental study, this paper shows that the two timing parameters, i.e.,control period and delay, has a tradeoff relation in terms of control performance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.9-10
• /
• 2002

Human circulatory system between heart and tissue is not directly connected in normal condition but mandatory to go through the capillary system in order to fulfill its physiologic aim to deliver oxygen and nutrients, etc. to the tissue and retrieve used blood together with waste products from the tissue properly. When abnormal connection between arterial and venous system (AV fistula), these two circulatory systems respond differently to the hemodynamic impact of this abnormal connection between high pressure (artery) and low pressure (vein) system. Depending upon the location and/or degree (e.g. size and flow) of fistulous condition, each circulatory system exerts different compensatory hemodynamic response to this newly developed abnormal inter-relationship between two systems in order to minimize its hemodynamic impact to own system of different hemodynamic characteristics. Pump action of the heart can assist the failing arterial system directly to maintain arterial circulation against newly established low peripheral resistance by the AV fistula during the compensation period, while it affects venous system in negative way with increased venous loading. However, the negative impact of increased heart action to the venous system is partly compensated by the lymphatic system which is the third circulatory system to assist venous system independently with different hemodynamics. The lymphatic system with own unique Iymphodynamics based on peristaltic circulation from low resistance to high resistance condition, also increases its circulation to assist the compensation of overloaded venous system. Once these compensation mechanisms should fail to fight to newly established hemodynamic condition due to this abnormal AV connection, each system start to show different physiologic ${\underline{de}compensation}$ including heart and lymphatic system. The vicious cycle of decompensation between arterial and vein, two circulatory system affecting each other by mutually negative way steadily progresses to show series of hemodynamic change throughout entire circulation system altogether including heart. Clinical outcome of AV fistula from the compensated status to decompensated status is closely affected by various biological and mechanical factors to make the hemodynmic status more complicated. Proper understanding of these crucial biomechanical factors iii particular on hemodyanmic point of view is mandatory for the advanced assessment of biomechanical impact of AV fistula, since this new advanced concept of AY fistula based on blomechanical information will be able to improve clinical control of the complicated AV fistula, either congenital or acquired.

• 동력기계공학회지
• /
• 제11권2호
• /
• pp.38-43
• /
• 2007

전자기적으로 지지되는 임펠러를 가진 원심 혈액 펌프는 기존의 심장 펌프에 비해 많은 장점을 가지고 있지만, BVAD의 틈새에서 발생하는 유체 동역학적인 문제는 여전히 규명이 되지 않은 상태이다. 본 연구에서는 BVAD의 틈새에서 발생하는 혈액외상(blood trauma)의 예측에 대한 연구에 중점을 두고 있다. 일반적으로 원심 혈액 펌프의 설계를 위해 전자기적으로 지지되는 원심 혈액 펌프의 디스크 틈새에서 발생하는 혈액의 손상을 평가하는 방법으로 CFD를 이용한 방법이 널리 이용되고 있다. 따라서, 본 연구에서는 초기 원심 혈액 펌프의 설계 단계에서 펌프의 특성을 평가하기 위하여, 축 방향 틈새의 영향과 회전수 변화에 따른 누수경로의 전단 응력의 크기 평가를 CFD를 사용하여 해석하여 보았다.

• 통상정보연구
• /
• 제7권4호
• /
• pp.157-177
• /
• 2005

In many countries, a Single Window system for simplifications is establishing in order to reduce works submitted double data and compliance costs. A Single Window is defined as a facility that allows parties involved in trade and transport to lodge standardized information and documents with a single entry point to fulfil all import, export, and transit-related regulatory requirements. A Single window can bring improved level of security, faster clearance and reduced compliance costs. UN/CEFACT released "Recommendation and Guidelines on establishing a Single Window to enhance the efficient exchange of information between trade and government". Also, WCO has made progress several projects to assist effective establishing a single window, i.e. CDM, UCR, ICT. Korea has being established a single window system, "e-trade platform" connected with trade, clearance, logistics, marketing and payment system. Some suggestions to establish a effective single window system in Korea are as follows. Firstly, it is necessary to clearly define roles and responsibilities of a lead agency in a single window system and form a organic relationship with PGA. Secondly, a single window system has to be progressed by stages, namely, customs clearance portal system should be established first, and later established e-trade platform. Lastly, the Korean government has to take part in CDM project to gain an advantage over other countries.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.89-99
• /
• 2017

Many works have attempted to solve the scalability, the availability, and the low-latency problems of peer-to-peer (P2P) live video streaming; yet, the problems still remain. While tree-based systems are vulnerable to churn, the mesh-based systems suffer from high delay and overhead. The DHT-aided chunk-driven overlay (DCO) [1] tried to tackle these problems by using the distributed hash table (DHT), which structures into a mesh-based overlay to efficiently share the video segment. However, DCO fully depends on the capacity of the users' device which is small and unstable, i.e., the users' device may leave and join the network anytime, and the video server's bandwidth can be insufficient when the number of users joining the network suddenly increases. Therefore, cloud assist is introduced to overcome those problems. Cloud assist can be used to enhance the availability, the low-latency, and the scalability of the system. In this paper, the DHT is used to maintain the location of the streaming segments in a distributed manner, and the cloud server is used to assist other peers when the bandwidth which required for sharing the video segment is insufficient. The simulation results show that by using the threshold and cloud assist, the availability and the low-latency of the video segments, and the scalability of the network are greatly improved.