• 한국항공우주학회지
• /
• 제30권6호
• /
• pp.69-77
• /
• 2002

수직 돌풍이 작용하는 비행선의 비선형 방정식을 이용하여 종방향 운동에 대한 동적 반응을 살피고 제어기를 설계하였다. 비행선의 부가 질량과 부가 관성 모멘트는 동적 반응 및 정착시간을 지연시키므로 일반적인 항공기에 비해 매우 느리다. 본 논문에서는 사용된 비행선은 고도 500m에서 1,000m 상공을 순항하며 임무를 수행하기 위한 것으로, 그 고도에서 대기 조건은 바람이나 돌풍에 의해 영향을 받아 매우 불안정하다. 따라서 가상 질량 효과가 두드러지는 수직 평면에 작용하는 수직 돌풍이 비행선에 미치는 영향을 살펴보고, PID-제어기를 사용하여 제어기를 설계하였다. 돌풍이 작용하면 비행선은 평형 상태로 회복하지만, 회복 시간이 매우 오래 걸릴 뿐 아니라 속도에 있어 손실이 발생한다. 따라서 본 논문의 목적은 회복 시간은 빠르게 하는 것과 순항 속도로 되돌아가는 것이다. 제어기에 사용된 피라미터들은 안정 모드 해석으로부터 결정되었으며, 이때 제어 압력은 추력 및 엘리베이터 각이다.

• 구강회복응용과학지
• /
• 제27권1호
• /
• pp.117-123
• /
• 2011

총의치 환자의 치료 시 인상 채득 과정은 의치의 지지, 유지, 그리고 안정을 위해 매우 중요하며, 의치의 성공여부를 좌우한다. 총의치 인상 채득을 위한 여러 가지 재료와 방법들이 이용되어 왔으며, 그 중 조직 양화재 (tissue conditioner)를 이용한 동적 인상법 (dynamic impression method)은 보다 생리적이고 기능적인 방법이다. 본 증례들에서는 무치악 환자에서 조직 양화재인 Coe-comfort$^{(R)}$ (GC America, IL, USA)를 이용한 동적 인상법으로 변형된 연조직의 회복과 하께 가장 생리적인 상태로 인상을 채득하여 의치의 제작 및 첨상을 시행하였으며, 만족스런 결과를 얻었다.

• 대한한의학회지
• /
• 제34권3호
• /
• pp.126-142
• /
• 2013

Objectives: Previous reports have shown that Bogijetong-Tang (BJT) is effective in peripheral neuropathy induced by taxol and crush injury. In this study, we researched the effects of BJT on diabetic neuropathy induced by STZ in the mouse. Methods: We performed both in vitro and in vivo experiments to verify the effects of BJT on diabetic neuropathy induced by STZ in mice. Changes in axonal recovery were observed with immunofluorescence staining using NF-200, Hoechst33258, $S100{\beta}$, caspase 3 and anti-cdc2. Proliferation and degeneration of Schwann cells were investigated by immunofluorescence staining and western blot analyses. Results: BJT showed considerable effects on neurite outgrowth and axonal regeneration in diabetic neuropathy. BJT contributed to the creation of NF-200, GAP-43, Cdc2, phospho-vimentin, ${\beta}1$, active ${\beta}1$, ${\beta}3$ integrin, phospho-Erk1/2 protein. Conclusions: Through this study, we found that BJT is effective for enhanced axonal regeneration via dynamic regulation of regeneration-associated proteins. Therefore, BJT had a pharmaceutical property enhancing recovery of peripheral nerves induced by diabetic neuropathy and could be a candidate for drug development after more research.

• 복식문화연구
• /
• 제12권2호
• /
• pp.279-289
• /
• 2004

This study was conducted to compare the hunting reaction of finger in the cold water. Finger skin temperature is measured the left middle finger tip immersion in cold water of 5℃ for 30 minutes and measurements were made on finger skin temperature(Ts), thermal comfort, and cold pain sensations during the experiment at the spring (March) and Winter(December). Results were follows. Is before immersion was at the highest in spring and at the lowest in winter and was closely related to the indoor temperature Ts during immersion and recovery. Mean of finger skin temperature(MST), the skin temperature at the first rise(TTR) and amplitude of finger skin temperature reaction during immersion(AT) were significant higher in spring than that in winter(P＜.01). The lowest skin temperature(LST) during the cold water immersion were significantly higher in spring than that in winter (P＜.05). The frequency of the appearance of cold-Induced vase dilation(CIVD) was higher in spring than that in winter. However, time for the first temperature(TTR) and recovery time(RT) had no seasonal variation. In addition, cold pains during immersion were felt more strongly in spring than in winter. Local thermal sensation, finger thermal sensation in dynamic state during hand immersion was different from that in the Winter. Spring was slowly cold in cold water immersion.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1410-1417
• /
• 1999

A thorough understanding of the transient behavior during start-up is essential in the design and operation of the heat recovery steam generator(HRSG). During this period of time, material that is exposed to high temperature and experiences a large temperature variation is subject to high thermal stress. In this work, a transient formulation of the HRSG is constructed including the estimation of the thermal stress and fatigue of the drum wall. Start-up behavior of a single-pressure HRSG is analyzed and the effect of bypassing part of the gas turbine exhaust flow on the thermal stress evolution is examined. It is found that the modulation of the gas flow rate using a bypass damper is very useful in view of reducing the thermal stress of the drum and ensuring the fatigue lifetime.

• 한국멀티미디어학회논문지
• /
• 제13권2호
• /
• pp.161-170
• /
• 2010

ELF는 실행과 링킹 형식(Executable and Linkable Format)의 약어로서, 리눅스 시스템에서 사용하는 공유 라이브러리와 실행 파일을 위한 기본 파일 형식이다. 한편 링커는 정적 링킹을 통한 목적 파일 생성 시, 정적 공유 라이브러리의 심볼 정보를 목적 파일 내 심볼 테이블에 복사한다. 이 때, 심볼 테이블은 공유 라이브러리가 제공하는 함수 이름을 포함하여 여러 가지 디버깅 관련 정보를 포함하는데, 프로그램 실행에 직접적인 영향을 미치지 않는다는 점을 이용하여 보안상 디버깅되는 것을 방지하기 위해 삭제될 수 있다. 본 논문은 심볼 테이블이 삭제된 ELF 목적 파일에서 정적 공유 라이브러리의 심볼 정보를 복구하는 방법을 제안하고 실제로 실험을 행하여 복구된 심볼 정보를 확인한다.

• Journal of Communications and Networks
• /
• 제8권1호
• /
• pp.59-69
• /
• 2006

Bluetooth is reputed as a wireless networking technology supplying ad-hoc networks between digital devices. In particular, Bluetooth scatternet is an essential part of dynamic ad-hoc networks. Yet, there have not been sufficient researches performed on scatternet environment. This paper proposes a scatternet reformation algorithm for ad-hoc networks for instances where some nodes enter or leave the scatternet. The proposed algorithm is a general algorithm that can be applied to many types of Bluetooth scatternet regardless of the topology. The proposed algorithm is made for two reformation cases, i.e., nodes leaving and nodes entering. For the reformation when nodes leave a scatternet, the recovery node vector (RNV) algorithm is proposed. It has short reformation setup delay because the process involves a single page process (not including inquiry process). For the reformation when nodes enter a scatternet, the entry node algorithm is proposed. This is a simple and easily implementable algorithm. In this paper, real hardware experiments are carried out to evaluate the algorithm's performance where the reformation setup delay, the reformation setup probability and the data transfer rate are measured. The proposed algorithm has shown improvement in the reformation setup delay and probability.

• Structural Monitoring and Maintenance
• /
• 제3권3호
• /
• pp.195-214
• /
• 2016

Monitoring of impact loads is a very important technique in the field of structural health monitoring (SHM). However, in most cases it is not possible to measure impact events directly, so they need to be reconstructed. Impact load reconstruction refers to the problem of estimating an input to a dynamic system when the system output and the impulse response function are usually known. Generally this leads to a so called ill-posed inverse problem. It is reasonable to use prior knowledge of the force in order to develop more suitable reconstruction strategies and to increase accuracy. An impact event is characterized by a short time duration and a spatial concentration. Moreover the force time history of an impact has a specific shape, which also can be taken into account. In this contribution these properties of the external force are employed to create a sample-force-dictionary and thus to transform the ill-posed problem into a sparse recovery task. The sparse solution is acquired by solving a minimization problem known as basis pursuit denoising (BPDN). The reconstruction approach shown here is capable to estimate simultaneously the magnitude of the impact and the impact location, with a minimum number of accelerometers. The possibility of reconstructing the impact based on a noisy output signal is first demonstrated with simulated measurements of a simple beam structure. Then an experimental investigation of a real beam is performed.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.161-167
• /
• 2002

For the purpose of applying to micro-actuator, thermal properties and displacement of electrostrictive polyurethane(PU) elastomers have been measured. In order to understand an effect of PU component, crosslinking agent are controlled by 0.5 wt% and 1 wt%. DMPA and anther chain extenders were used. PU sample that chain extenders are DMPA is added NaOH for comprehension of effect of ionic groups. The deposited electrode sire on PU films is equal to acrylic holder size when the displacement was measured. Dynamic response according to frequency, displacement and recovery time according to PU thickness were measured. 1 wt% crosslinking agent contents PU samples have higher displacement and lower recovery time than 0.5 wt% crosslinking agent contents PU. If the PU thickness is increased, the actuating voltage for generating of same displacement is increased, too.

• Korea-Australia Rheology Journal
• /
• 제20권1호
• /
• pp.27-34
• /
• 2008

Clay suspensions in liquid polymers exhibit a time-dependent behaviour that includes viscoelastic as well as thixotropic features. Because of the presence of interacting clay platelets, particulate networks can develop, which are broken down during flow and rebuild upon cessation of the flow. Here, the use of thixotropic techniques in probing flow-induced structures in nanocomposites is explored with data on a hectorite-poly(isobutylene) model system. By means of fast stress jump measurements the hydrodynamic contributions to the steady state stresses are determined as well as those caused by the stretching of the clay floes. Flow reversal measurements do not provide a clear indication of flow-induced anisotropy in the present case. The recovery of the clay microstructure upon cessation of flow is followed by means of overshoot and dynamic measurements. The development of a particulate network is detected by the appearance and growth of a low frequency plateau of the storage moduli. The modulus-frequency curves after various rest times collapse onto universal master curves, regardless of the pre-shear history or temperature. The scaling factors for this master curve are the crossover parameters. The crossover moduli are nearly a linear function of the crossover frequency, the relation being identical for recovery after shearing at different shear rates. This function depends, however, on temperature.