• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.427-430
• /
• 2008

The influence of subsequent annealing treatment on the dynamic deformation and the fracture behavior of submicrocrystalline Al-4.4%Mg alloy is investigated in this study. After inducing an effective strain of 8 via equal-channel angular pressing at $200^{\circ}C$, most of the grains are considerably reduced to nearly equiaxed grains of $0.3{\mu}m$ in size. With an increment of various subsequent heat treatments for 1 hour, resultant microstructures are found to be fairly stable at temperatures up to $200^{\circ}C$, suggesting that static recovery will be dominantly operative, whereas grain growth is pronounced above $250^{\circ}C$. The results of tensile tests show that yield and ultimate tensile strength decrease, but elongation-to-failure and strain hardening rate increase with an increase in annealing temperatures. The dynamic deformation and the fracture behavior retrieved with a series of torsional tests are explored with respect to annealed microstructures. Such mechanical response is analyzed in relation to resultant microstructure and fracture mode.

• Steel and Composite Structures
• /
• 제25권2호
• /
• pp.231-244
• /
• 2017

This paper presents the structural identification of an arch dam model for the damaged, repaired and strengthened conditions under different water levels. For this aim, an arch dam-reservoir-foundation model has been constructed. Ambient vibration tests have been performed on the damaged, repaired and strengthened dam models for the empty reservoir (0 cm), 10 cm, 20 cm, 30 cm, 40 cm, 50 cm and full reservoir (60 cm) water levels to illustrate the effects of water levels on the dynamics characteristics. Enhanced Frequency Domain Decomposition Method in the frequency domain has been used to extract the dynamic characteristics. The dynamic characteristics obtained from the damaged, repaired and strengthened dam models show that the natural frequencies and damping ratios are considerably affected from the varying water level. The maximum differences between the frequencies for the empty and full reservoir are obtained as 16%, 33%, and 25% for damaged, repaired and strengthened model respectively. Mode shapes obtained from the all models are not affected by the increasing water level. Also, after the repairing and strengthening implementations, the natural frequencies of the arch dam model increase significantly. After strengthening, between 46-92% and 43-62% recovery in the frequencies are calculated for empty and full reservoir respectively. Apparently, after strengthening implementation, the mode shapes obtained are more acceptable and distinctive compared to those for the damaged model.

• Journal of Astronomy and Space Sciences
• /
• 제36권3호
• /
• pp.133-147
• /
• 2019

Challenging Minisatellite Payload (CHAMP) satellite magnetic data are used to investigate the latitudinal variation of the storm-time meso-scale field-aligned currents by defining a new metric called the FAC range. Three major geomagnetic storm events are considered. Alongside SymH, the possible contributions from solar wind dynamic pressure and interplanetary magnetic field (IMF) $B_Z$ are also investigated. The results show that the new metric predicts the latitudinal variation of FACs better than previous studies. As expected, the equatorward expansion and poleward retreat are observed during the storm main phase and recovery phase respectively. The equatorward shift is prominent on the northern duskside, at ${\sim}58^{\circ}$ coinciding with the minimum SymH and dayside at ${\sim}59^{\circ}$ compared to dawnside and nightside respectively. The latitudinal shift of FAC range is better correlated to IMF $B_Z$ in northern hemisphere dusk-dawn magnetic local time (MLT) sectors than in southern hemisphere. The FAC range latitudinal shifts responds better to dynamic pressure in the duskside northern hemisphere and dawnside southern hemisphere than in southern hemisphere dusk sector and northern hemisphere dawn sector respectively. FAC range exhibits a good correlation with dynamic pressure in the dayside (nightside) southern (northern) hemispheres depicting possible electrodynamic similarity at day-night MLT sectors in the opposite hemispheres.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.105-112
• /
• 2020

The increase in the edentulous jaw which occurs in the aged population has led to personal dental health concerns. In the case of dental implant surgery, the duration of a patient's recovery depends on the surgical plan and their physicical ability. A device may be required to assist a physician in controlling vibration reduction of free-hand drilling and prescribing a good treatment plan that is suitable for the patient's condition. In this work, an artificial tooth-root implant assistant manipulator was studied. The structure and the vibration analysis of the dynamic restraint manipulator that is for drilling the alveolar bone in the mandible bone were performed, and the structural stability was analyzed. Further, a virtual prototype of an artificial tooth-root implant assisted manipulator was fabricated and tested. Hence, the state of the Remote Center of Motion (RCM) point and the driving state of the manipulator were confirmed. Furthermore, the drilling experiments were performed by using materials similar to a human jawbone in order to evaluate the performance of the drilling process that is operated using the assistant manipulator.

• 공업화학
• /
• 제8권5호
• /
• pp.729-736
• /
• 1997

산업폐열을 활용하기 위해 금속염화물-암모니아계 화학열변환기를 설계하고 1kW-1hr 용량의 장치개발을 하였다. 이는 $170^{\circ}C$ 열원을 $210^{\circ}C$ 이상으로 승온시키는 화학열펌프 시스템으로서, 효율적인 화학반응기의 설계를 위하여 필요한 반응물의 양과 반응물의 조건 등을 산출하는 정적계산과 동적모사를 수행하였다. 모사결과 열교환면적이나 반응기내 염의 양 등의 변수에 따라 시스템의 온도와 출력이 변함을 알 수 있었고 또한 반응물질의 양과 겉보기밀도 및 장치구조의 영향을 고찰하고 최적조건을 결정할 수 있었다. 4단계 작동사이클에 따라 운전한 결과 온도 및 출력의 실험치는 모사치와 비교하여 양호한 결과를 얻었으며 이 화학열변환기는 일정온도로 승온시킬 수 있는 특징으로 인해 앞으로 산업공정에서 배출되는 폐열원을 활용할 수 있는 시스템으로서의 가능성을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제37권4호
• /
• pp.134-139
• /
• 2016

US Food and Drug Administration (FDA) approved as a innovative cure for cancer, 1996. The effect is death of cancer cells through necrosis, apoptosis. Mainly the Continuous Wave mode (CW) use for PDT Laser. It sting, the question including itch, and etc. Reportedly, the increase of temperature with the perforated edema, ulcer, necrosis. The Thermal relaxation time and Oxygen recovery time is necessary. To give a normal oxygen recovery time of the cell, used Pulse mode. Progress, it was Burst Pulse mode when easing the thermal wake, the simplicity was secured, the PDT effect is good. Excepted in control group CW, Pulse, Burst pulse mode were incubated with various concentrations of 5-aminolevulinic acid hydrochloride (ALA-5). The tumor size reduction CW mode (44%), Pulse mode (48%), Burst pulse mode (53%) at 4 week after PDT with 0.3, 0.3, 0.3 mg/ml of ALA-5. After 4 hours, investigation of 100, 100, $100J/cm^2$ laser irradiation. The pulse mode was superior in expirimental data analysis. And it was the Burst pulse mode edge head of a family effect.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.337-341
• /
• 2001

A new method to extract gold from pyrite roster cinder, which combines ultra-fine-grinding with resin-in-pulp, has been studied in this paper. Compared with traditional leaching technology, it can short leaching time, avoid complex filter process, lower sodium cyanide consumption and increase gold recovery by 35%. During leaching, aluminium oxide ball was used as stirred medium, hydrogen peroxide as leaching aid and sodium hexametaphosphate as grinding aid. With the high efficiency and chemistry effect of ultra-fine-grinding, the leaching process was developed and the gold leaching rate may reach 88%. With AM-2 Б resin as abosorber and sulfocarbamide (TU) as eluent, gold was recovered from cyanide pulp by resin-in-pulp. AM-2 Б resin has good adsorbability in cyanide solution(pH=10). It was easy to elude gold from the loaded resin with 0.1㏖/L cholhydric acid and 1㏖/L sulfocabamide. The effect of contact time, temperature and acidity etc. on the gold absorption had been examined with static methods. The results showed that the adsorption and desorption of gold could both reach over 98%. The effects of flow rate of solution on dynamic adsorption and elution of gold had been examined with dynamic methods. Breakthrough curve and elution curve had been drawn in this paper. A mild condition was determined through a number of experiments: leaching time 2 hours, liquid solid ratio 4:1, sodium cyanide 3kg/t, hydrogen peroxide 0.05%, sodium hexametaphosphate 0.05%; adsorption time 30 minutes, temperature 10-3$0^{\circ}C$, resin($m\ell$) solid(g) ratio 1:10, eluent resin ratio 10-20:1, velocity of eluent $1.5m\ell$/min. Under the mild condition, the gold recovery may reach 85%.

• 한국컴퓨터정보학회논문지
• /
• 제17권3호
• /
• pp.41-50
• /
• 2012

웹 서비스 어플리케이션 기반 모니터링 시스템에서 빈번히 발생되는 데이터 구조 변경에 따른 코드 재생산에 확장성 및 오류 복구능력 향상을 위하여 DTD(Document Type Definition)자동 생성 기법을 이용한 모니터링 시스템 설계방법을 제안하였다. 제안한 DTD자동 생성 기법은 센서 데이터 구조가 수정되어도 서버 측에서 동적 서버사이드 스크립트(Dynamic Server-side Script)로 DTD정보를 자동으로 생성해 주기 때문에 데이터 손실과 오류에 대한 능동적인 대처가 가능하며, AJAX(Asynchronous JavaScript and XML)를 이용한 XML데이터 파싱(Parsing)을 구성하여 대단위 데이터 전송이나 다양한 모니터링 시스템 분야에 데이터 손실이나 손상 확인 등의 예외처리 및 데이터 구조의 확장과 축소가 용이하였다. 제안된 시스템은 일시적인 데이터 깨짐 상황에서 정상화 복구에 필요한 평균시간이 기존의 XML을 이용한 방법보다 약 44.8ms감소되어 오류 복구처리 속도가 향상됨을 알 수 있었다.

• 한국정보과학회논문지:시스템및이론
• /
• 제29권2호
• /
• pp.75-86
• /
• 2002

분산 시스템에 결함 내성 기능을 제공하는 기법의 하나인, 검사점을 이용한 회복 기법을 효율 적으로 구현하기 위해서는 최적화된 검사점 설정 구간의 선택이 매우 중요한 문제로 인식되고 있다. 본 논문은 분산 시스템내의 각 프로세스 적절한 검사점 설정 구간을 프로세스의 연산 중에서 동적으로 스케 쥴링 하는 기법을 제안한다. 제안된 기법에서는 시스템내에의 각 프로세스가 현 검사점 구간 동안으 검사점 설정 비용과 가능한 롤백 회복 비용을 비교 평가하고, 다음 검사점 설정을 위한 적절한 구간을 계산한다. 대부분의 기존 기법들과는 달리 제안된 기법은 검사점과 롤백 두 가지 비용 모두를 최소화는 구간 값 을 선택하여 , 현 검사점 구간 동안의 통신 형태를 고려한 구간 값을 선택한다. 또한 검사점 설정 구간 선 택을 위한 별도의 통신비용의 요구되지 않으며, 제안된 기법의 기존의 검사점 조정 기법들과 쉽게 통합되어 사용될수 있다.

• 한국통신학회논문지
• /
• 제40권11호
• /
• pp.2305-2315
• /
• 2015

무선통신의 발전에 따라 주파수 자원 가치는 더욱 커지고 있다. 또한 정보화 사회 발전에 따라 주파수 자원의 수요가 공급에 비하여 매우 크기 때문에 주파수 부족 현상이 심각한 실정이다. 따라서 사용하지 않는 주파수 자원을 효율적으로 이용하기 위한 기술로서 최근 Cognitive Radio (CR) 기술이 각광 받고 있다. 본 논문에서는 주파수 홉핑 기반 인지무선 애드 혹 네트워크에서 새로운 out-of-band 주파수 센싱 기법과 동적 채널 엑세스 방법에 대해 제안한다. 제안된 방법에서 CR 멤버노드들은 현재 홉핑 시간의 초반부에 다음 홉핑 채널에 대한 센싱을 수행하고, 제안된 주사용자 감지 신호 방송 기법에 따라 각 노드는 현재 채널에 대한 홉핑 시간 연장여부를 결정한다. 주사용자가 발견되어 잠정적으로 사용하지 않았던 채널이 다시 사용가능한 상태가 되면 해당 채널을 원래의 홉핑 패턴에 포함시키는 채널 복구절차를 수행한다. 본 논문에서는 제안된 동적 주파수 센싱과 홉핑 채널 연장 메커니즘에 대해 다양한 무선 환경에서의 성능평가를 수행하였다. 제안된 방식은 기존 방식에 비하여 채널 효율을 높이고 신뢰할 수 있는 채널 관리를 수행할 수 있음을 확인하였다.