• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.788-793
• /
• 2002

Hybrid type slim tilt actuator and 6-wire supported are developed for DVD recording in the optical disc drive of notebook PC, which can compensate the inclination of disc and objective lens. The hybrid actuator uses the actuating method of moving coil in the focus and track direction and that of moving magnet in the tilt direction. Comparing with 6-wire supported actuator and hybrid type actuator, we can choose an actuator for slim super combo pickup. Two actuator are designed through the modal analysis and magnetic field analysis and experimental results shows dynamic characteristics. Finally, it is verified that the actuator can compensate the disc tilt of ${\pm}0.4^{\circ}$.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.238-241
• /
• 2012

모든 기록매체의 장기보존성과 신뢰성은 보존에 있어 중요한 요소 중 하나이다. DVD 광기록매체 또한 신뢰성을 평가하기 위한 다양한 국제표준 및 연구가 진행되었다. 국가기록원은 각급 기관에서 생산되어 이관된 다양한 종류의 DVD 광매체를 보존하고 있으며, 이에 대한 상태평가를 위해 선행된 표준 및 연구 내용을 바탕으로 이관된 광매체에 대한 상태를 측정을 하였다. 본 연구에서는 이관된 DVD 매체에 대한 평가 기준을 8개의 연속된 ECC블럭의 PI 에러값을 사용하였다. 측정된 PI 에러 값은 생산년도, 제조회사, 에러 발생 위치로 분류하였으며 시간에 따른 열화 정도, 기록 품질 그리고 에러 발생 위치에 따른 매체 상태와의 연관성을 연구하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.484-489
• /
• 2001

Recent trends in information storage devices disk are the transition from CD drives to high density DVD drives, the development of writable disk drives and the appearance of several high-density portable disk drives. In some flexible disk drives, self-excited disk vibrations become severe as rotation speed increases near or above critical speed. Critical speeds of CD/DVD, ASMO and floppy disks are experimentally measured and compared with analytical predictions. Flutter instability caused by aero-induced disk vibration at high speeds are experimentally observed. In ASMO, three nodal-diameter mode experiences its flutter at 8750 rpm with the frequency lock-on phenomenon. The CD/DVD disk does not have the aero-induce flutter up to 14,000 rpm.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.340-343
• /
• 1999

In this paper, we propose a wide range PLL(Phase Locked Loop) for 64X CD-ROMs & l0X DVD-ROMs. The frequency locking range of the Proposed PLL is 75MHz~370MHz. To reduce jitters caused by large VCO gain and supply voltage noise, a new V-I converter and a differential delay cell are used in 3-stage ring VCO, respectively. The new V-I converter has a 0.6V ~ 2.5V wide input range. In addition, we propose a new charge pump which has perfect current matching characteristics for the sourcing/sinking current. This new charge pump improves the locking time and the locking range of the PLL. This Chip is implemented in 0.25${\mu}{\textrm}{m}$ CMOS process. It consumes 55㎽ in worst case with a single 2.5V power supply.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.378-380
• /
• 2002

There has been lower the tilt margin by the increase of coma aberration due to the reduction of wave-length and the increase of numerical aperture for high density recording. The RF signal degradation is increased as the decrease of tilt margin. To compensate the tilt margin, the optical pick-up actuator for high-speed CD/DVD re-writable system should be able to drive the radial-tilt motion. We announce that the 3-axis drive actuator for high-speed CD/DVD rewritable system. And what was more, the DC/AC sensitivities of this actuator are suitable fur the low-speed playability, the high-speed readability and the high-speed rewritability.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.365-367
• /
• 2002

A parallelized topology optimization is applied to the design of a DVD-pickup bobbin, for which the design objective is to maximize the fundamental frequency within a given mass limit. Unlike the existing serial topology optimization, the present method can deal with a large number of design variables, and thus can yield practical and realistic results. The structural member-sizing filter is also employed to control the topological complexity of the optimized bobbin structure.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.1
• /
• pp.179-198
• /
• 2005

The purpose of this study is to propose a strategic approach to improve firms competitive advantages by selecting main business body and business sector at the same time. In this study the strategy of an efficient business model for joint logistics is suggested by means of searching for a joint program. The methods applied to this study were literature survey, questionnaire and internet information as well as case studies on advanced domestics and foreign logistics enterprises. The research scope of this study has focused on the joint logistics of SMEs being in the DVD(Digital Video Disk) industry sector. The results of this study are shown as follows ; first, in short terms, main business operating body has, second, in long terms, logistics operating enterprise has a direct effect on the joint logistics operation strategy of the DVD(Digital Video Disk) industry in Korea. The conclusion of this study shows that this method as a model of consequence to increase the joint logistics implementation successfully.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.04a
• /
• pp.248-253
• /
• 2000

대용량의 연속 매체(continuous media)를 서비스하기 위한 멀티미디어 저장 서버는 실시간 검색과 대용량의 저장 장치 요구를 만족해야 한다. 그러나 기존에 연구되고 있는 디스크 배열(disk array)을 이용한 저장 서버는 성능 면에서 멀티미디어 응용에 바람직한 면이 있지만, 대규모 서버를 위한 저장 장치 전체를 디스크로 구성하는 것은 비용 면에서 비현실적일 뿐만 아니라 저장 용량과 대역폭에도 한계가 있다. 따라서 본 논문은 저가의 대용량 DVD-ROM을 사용한 계층적 저장 서버에서 파이프라인 로딩 기법을 제안한다. 제안된 기법은 시뮬레이션 성능분석을 통하여 파이프라인 상황하최대 허용 스트림 수가 크게 증가될 수 있음을 보인다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.1 s.343
• /
• pp.17-26
• /
• 2006

The analog Viterbi decoder for the PR (1 2 2 1) which is used for BVD read channel is designed with circular analog parallel circuits. Since the inter symbol interference is serious problem in the high density magnetic storage device or DVD, the PRML technology is normally employed for the purpose of minimizing the decoding error. The feature of the PRML technology is with the multi-level coding according to the predetermined combining rule among the neighboring symbols and with the decoding according to the known combining rule. Though the conventional PRML technology is implemented with the digital circuits, the recent trend towards this end is with the utilization of the analog circuits due to the requirements of higher speed and lower power in the DVD read channel. In this study, the Viterbi decoder which is the bottleneck of the PRML implementation is designed with the analog parallel circuit structure. The designed Viterbi decoder for the PR (1 2 2 1) signal shows 3 times faster in the speed and 1/3 times less in the power consumption than thoseoftheconventionaldigitalcounterpart.

• Atmosphere
• /
• v.24 no.2
• /
• pp.173-188
• /
• 2014

The KMA has cooperated with the Oklahoma University in USA to develop a Polarimetric Radar Data (PRD) simulator to improve the microphysical processes in Korea Local Analysis and Prediction System (KLAPS), which is critical for the utilization of PRD into Numerical Weather Prediction (NWP) field. The simulator is like a tool to convert NWP data into PRD, so it enables us to compare NWP data with PRD directly. The simulator can simulate polarimetric radar variables such as reflectivity (Z), differential reflectivity ($Z_{DR}$), specific differential phase ($K_{DP}$), and cross-correlation coefficient (${\rho}_{hv}$) with input of the Drop Size Distribution (DSD) and scattering calculation of the hydrometeors. However, the simulator is being developed based on the foreign observation data, therefore the PRD simulator development reflecting rainfall characteristics of Korea is needed. This study analyzed a potential application of the 2-Dimension Video Disdrometer (2DVD) data by calculating the raindrop axis ratio according to the rain-types to reflect Korea's rainfall characteristics into scattering module in the simulator. The 2DVD instrument measures the precipitation DSD including the fall velocity and the shape of individual raindrops. We calculated raindrop axis ratio for stratiform, convective and mixed rainfall cases after checking the accuracy of 2DVD data, which usually represent the scattering characteristics of precipitation. The raindrop axis ratio obtained from 2DVD data are compared with those from foreign database in the simulator. The calculated the dual-polarimetric radar variables from the simulator using the obtained raindrop axis ratio are also compared with in situ dual-polarimetric observation data at Bislsan (BSL). 2DVD observation data show high accuracies in the range of 0.7~4.8% compared with in situ rain gauge data which represents 2DVD data are sufficient for the use to simulator. There are small differences of axis ratio in the diameter below 1~2 mm and above 4~5 mm, which are more obvious for bigger raindrops especially for a strong convective rainfall case. These differences of raindrop axis ratio between domestic and foreign rainfall data base suggest that the potential use of disdrometer observation can develop of a PRD simulated suitable to the Korea precipitation system.