• Journal of the Korea Institute of Building Construction
• /
• v.3 no.3
• /
• pp.73-81
• /
• 2003

In this paper, salt damage resistance of high durable concrete was tested. High durable concrete was made by using low water cement ratio, chemical admixture called super-durable admixture and mineral admixtures such as fly-ash, ground granulated blast-furnace slag, silica fume. Two kinds of salt damage resistance test were carried out. One method is chloride ion penetration test(ASTM C1202), and the other one is depth of chloride penetration test in saline solution. Test results were as followers: 1) The depth of chloride ion penetration increased exponentially as water cement ratio was increased and time passed. 2) Super-durable admixture had little effect on the improvement of salt damage resistance of concrete. 3) Silica fume and ground granulated blast-furnace slag were effective on salt damage resistance because of pozzolanic reaction, but fly-ash had a little effect.

• Research in Plant Disease
• /
• v.21 no.1
• /
• pp.20-23
• /
• 2015

A sequential planting method was developed to screen rice plants with durable resistance against rice blast in a short time, and applied for several years in Korean rice breeding program. In this study, we showed the advantages of a sequential planting method compared to other pathogenicity tests. The correlation analysis among three pathogenicity tests and other factors demonstrated that durable resistance depended on the average of diseased leaf area and the number of compatible pathogens. Significant correlations were found in the nursery test but not in the field test result. In addition, we traced changes in the pathogen population during sequential planting stages through re-isolation of the pathogen. The portion of compatible pathogens was increased during sequential planting. Through this study, we provide an effective sequential planting method and direction of durable resistance in a breeding program.

• Korean Journal Plant Pathology
• /
• v.13 no.2
• /
• pp.85-89
• /
• 1997

Etiological components of the rice cultivars possessing durable resistance to rice blast were evaluated. In the greenhouse test by artificial inoculation, number of leaf blast lesion in Dongjinbyeo was not increased by any race of the pathogen, while the lesion number on the resistant cultivar Palgongbyeo and susceptible cultivar Jinmibyeo was increased rapidly. Size of the lesion in Dongjinbyeo was smaller and progressed more slowly than the resistant cultivar Palgongbyeo until 11 days after inoculation. Latent period in Dongjinbyeo was intermediate. However, the period was significantly variable depending upon the races. Least amount of conidia was produced in Dongjinbyeo by race KJ-107 and the number of conidia was decreased rapidly from 11 days after inoculation.

• Journal of Korea Foundry Society
• /
• v.28 no.5
• /
• pp.237-241
• /
• 2008

This study has been carried out to investigate the wear and heat resistant properties of durable moldwash agent for Al gravity casting according to mold washing process conditions. The wear properties of coated specimen were performed by sliding wear testing machine and heat resistance were evaluated by measuring the loss of coated moldwash agent during emerging of coated specimen in Al melts. During testing, experimental variables were mold surface temperature, moldwash agent/distilled wear, and additive concentrations. The lower additive concentration and mold temperature caused the smooth surface roughness of coated specimen, It was found that the specimen coated with moldwash/water ratio 1:3, additive concentration 9wt% and mold temperature higher than $200^{\circ}C$ showed superior wear and heat treatment. Also, these results were supported by fluidity test.

• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.150-157
• /
• 2020

Hexachloro-cyclophosphazene(HCCP), a formaldehyde-free flame retardant (FR), was steam-cured with triethanol amine(TEA) to impart durable flame-retardancy to cotton fabrics. While the HCCP treatment alone showed very limited resistance to repeated laundering cycles, the addition of TEA substantially improved the laundering durability of the FR cotton up to twenty laundering cycles. The extended washing resistance was accomplished by the increased nucleophilic substitution of unreacted P-Cl groups in HCCP by the TEA resulting in the more densely crosslinked FR networks. With increasing molar ratio of TEA to the HCCP up to 2, the flame retarding effectivity and the synergistic effectiveness improved to 2.8 and 1.8 respectively. TGA and microscale combustion calorimetry verified the pyrolysis and combustion behaviors of the FR-cotton, which showed lower maximum pyrolysis and combustion temperatures together with substantially decreased peak pyrolysis and heat release rate, synergistically yielding larger amounts of carbonaceous chars. The formaldehyde-free HCCP and TEA can be a durable FR finishing agents for cotton fabrics acting through a solid-phase flame-retarding mechanism.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2004.10a
• /
• pp.61-62
• /
• 2004

See Full Text

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.4
• /
• pp.291-296
• /
• 2002

Fatty polyamide that gives softness, lubrication and bulky property and alkyl imidazoline that gives durable softness and antistatic property were synthesized. then, an O/W-type durable softener (DSN) was prepared by the emulsion of the synthesized fatty polyamide and alkyl imidazoline. Emulsion stability of the DSN was good, and the mixed HLB value was 11.2. From the measurement of softness, lubrication, antistatic property, bending resistance, and color fastness, it was proved that the prepared DSN was a good durable softener for nylon.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.401-404
• /
• 2008

Crack is a penetration path of harmful material such as chloride ion, and causes a serious deterioration in durability. So, the characteristics of chloride penetration are investigated for the cracked flexural concrete members using high-durable materials. For these, the flexural crack of beam specimen is introduced by transverse loading. And, Rapid Chloride Penetration Test (RCPT) and Long-term chloride penetration test are carried out to compare the chloride penetration depth. From test results when crack is happened, the chloride penetration resistance of the durable member was superior than that of the normal member. Blast furnace slag concrete member has a excellent chloride penetration resistance in long-term chloride penetration test.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.3 s.25
• /
• pp.57-65
• /
• 1987

The purpose of this study was to investigate the optimum treatment [condition for the Durable press finish of viscose rayon fabrics. Three types of commercial N-methylol crosslinking agents were applied to the fabric utilizing the pad-dry-cure technique. Changes in physical properties were evaluated for the various resin and catalyst concentrations. For DMU, the effect of different catalysts, $MgCl_2$ and $NH_4Cl$, were also compared. DMU treated fabrics showed in crease recovery angle, tensile strength and tearing strength but drastic decrease in abrasion resistance. DMDHEU and MDMDHEU treated fabrics were similar in most physical properties. However, DMDHEU treated fabrics were better in crease recovery angle and stiffness, and MDMDHEU treated fabrics were better in tensile strength, tearing strength and abrasion resistance. For a given resin system, crease recovery angle, tensile strength and stiffness increased with a increase in resin concentration. Tearing strength showed very little change, while abrasion resistance was decreased significantly as the crease recovery angle was increased. For the treatment of DMU, $MgCl_2$ catalyst was much better than $NH_4Cl$ in all physical properties. When $NH_4Cl$ catalyst was used, strength reduction and discoloration were observed. As the catalyst concentration increased, crease recovery angle, stiffness were increased. Tensile strength and tearing strength were increcased than control but at high catalyst concentration, the strength were decreased and abrasion resistance was significantly lowered. DMDHEU and MDMDHEU were more sensitive to catalyst concentrations than DMU.

• Korean Journal Plant Pathology
• /
• v.12 no.2
• /
• pp.231-236
• /
• 1996

한국에서 재배되고 있는 벼 품종의 도열별에 대한 지속저항성 품종을 조기에 선발, 보급할 수 있는 방법을 보색하기 위하여 1985년부터 1994년까지 온실 유묘검정, 밭못자리 및 포장검정을 통하여 저항성 정도를 평가하고 재배면적과 재배기간을 참고로 하여 지속저항성 품종을 선발하였다. 도열병에 대한 저항성 품종으로는 다양한 레이스에 침해되면서 개체당 병반수 20개 이내, 밭못자리검정에서는 평균 발병정도 5이하, 본답에서의 잎도열병은 병반면적율 0.5%이하, 이삭도열병 발생은 이병수율 5% 이내로 병발생이 비교적 적은 섬진벼, 팔공벼 및 동진벼를 선발하였고, 지속저항성 품종으로는 재배기간이 10년 이상 유지되면서 재배면적은 전체재배 면적의 20% 이상을 차지하고 있는 품종 중 장기간 동안 저항성을 발현하는 동진벼를 선발하였다.