• 한국통신학회논문지
• /
• 제38C권10호
• /
• pp.841-851
• /
• 2013

모바일 RFID/NFC 연동기술이란, 900 MHz 기반의 모바일 RFID 리더와 NFC 리더/태그를 하나의 SoC로 개발하여 USIM 카드에 탑재함으로써 현존하는 2가지 모바일 RFID 서비스를 통합 제공하기 위한 기술을 의미한다. 본 논문에서는 NFC기술과 유사한 서비스를 제공하는 모바일 RFID 기술과 관련 표준을 분석하여 NFC 기술과의 연동 가능성을 파악하고 연동 시 필수적으로 고려되어야 할 연동 요구사항을 도출하였다. 또한 듀얼태그의 도입과 코드체계의 연동을 통해 기존의 인프라를 최대한 활용할 수 있는 연동방안을 제안하였고 연동방안의 연동 요구사항 만족 여부를 분석하였다. 마지막으로 분석된 내용을 바탕으로 서비스 연동 환경 구축에 필요한 새로운 표준 설계의 방향성을 제시하였다.

• Earthquakes and Structures
• /
• 제12권3호
• /
• pp.263-270
• /
• 2017

In this study, two geometrically identical multi-storey steel buildings with different lateral load resisting systems are structurally analyzed under same earthquake conditions and they are compared with respect to their construction costs of their structural systems. One of the systems is a steel structure with eccentrically steel braced frames. The other one is a RC wall-steel frame system, that is a steel framed structure in combination with a reinforced concrete core and shear walls of minimum thickness that the national code allows. As earthquake resisting systems, steel braced frames and reinforced concrete shear walls, for both cases are located on identical places in either building. Floors of both buildings will be of reinforced concrete slabs of same thickness resting on composite beams. The façades are assumed to be covered identically with light-weight aluminum cladding with insulation. Purpose of use for both buildings is an office building of eight stories. When two systems are structurally analyzed by FEM (finite element method) and dimensionally compared, the dual one comes up with almost 34% less cost of construction with respect to their structural systems. This in turn means that, by using a dual system in earthquake zones such as Turkey, for multi-storey steel buildings with RC floors, more economical solutions can be achieved. In addition, slender steel columns and beams will add to that and consequently more space in rooms is achieved.

• 한국전자파학회논문지
• /
• 제14권9호
• /
• pp.912-918
• /
• 2003

본 논문에서는 셀룰러 CDMA와 IMT-2000 중계기 에 사용되는 이중대역 모노폴 안테나를 설계 및 구현하였다.3차원 전산모의실험 프로그램인 HFSS(High Frequency Structure Simulator)를 사용하여 안테나론 설계하였으며, 전기적 특성 측정은 HP 8720C네트웍 분석기론 사용하였다. 측정된 S$_{11}$값은 셀룰러 CDMA와 IMT-2000 전 대역에서 -l0.9 dB 이하의 특성을 보였으며, 859 MHz와 2027.5 MHz에서 각각 2.38 dBi와 4.02 dBi의 이득을 갖는 전방향 복사패턴을 전산모의실험 결과로 확인하였다. 구현된 안테나는 소형으로서 상용화시 낮은 가격으로 생산할 수 있다.다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권1호
• /
• pp.8-14
• /
• 2013

A low density parity check (LDPC) decoder provides a most powerful error control capability for mobile communication devices and storage systems, due to its performance being close to Shannon's limit. In this paper, we introduce an efficient overlapped LDPC decoding algorithm using a upper dual-diagonal parity check matrix structure. By means of this algorithm, the LDPC decoder can concurrently execute parts of the check node update and variable node update in the sum-product algorithm. In this way, we can reduce the number of clock cycles per iteration as well as reduce the total latency. The proposed decoding structure offers a very simple control and is very flexible in terms of the variable bit length and variable code rate. The experiment results show that the proposed decoder can complete the decoding of codewords within 70% of the number of clock cycles required for a conventional non-overlapped decoder. The proposed design also reduces the power consumption by 33% when compared to the non-overlapped design.

• 정보처리학회논문지C
• /
• 제13C권1호
• /
• pp.75-82
• /
• 2006

본 논문에서는 이중 Viterbi 복호기를 가지는 공간-주파수 부호화된 직교 주파수분할다중화 방식을 제안하고 분석한다. 여기서는 이진 정보원 부호를 컨볼루션 부호화한 후 서로 독립적인 두 개의 반을 직교 주파수분할다중화 심볼이 생성된다. 수신기는 복조된 신호를 이중 Viterbi 복호기를 이용하여 독립적으로 복호하고, 이들의 경로 메트릭을 비교한다. 따라서 기존 시스템에서의 복구된 이진 데이터는 단순한 Viterbi 복호기의 출력으로 나타나는 반면 제안된 방식에서는 분절길이 내에서 큰 경로 메트릭을 가지는 부호열의 조합이 된다. 그 결과, 제안된 공간-주파수 부호화된 직교 주파수분할다중화 방식은 기존의 시스템에 비하여 모든 신호대 잡음비 영역에서 향상된 성능을 갖는다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.111-118
• /
• 2004

For the precise analysis of high velocity impact problem though FEM with element erosive method, the adequate mesh size and critical equivalent plastic strain(EQPS) is chosen prior to the simulation. In this research, it is strongly required from a standpoint that critical EQPS is used to decide whether perforation occurs or not. The optimization of dual armor plate consisting of 4340 steel and 2024 aluminium against a die steel sphere with high-velocity has been suggested using Lagrangian explicit time-integration code, NET2D. The response surface method based on the design of experiment is utilized for the size optimization. The optimized thickness of each layer, in which perforation does not occur, the strength of multi-layer is maximized and total weight is minimized, is obtained at a constant velocity of a pellet with a designated total thickness.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
• /
• pp.51-54
• /
• 2000

This paper describes the fixed-point DSP implementation of a CELP(code-excited linear prediction)-based speech coder. The effective realization methodologies to maximize the utilization of the DSP's architectural features, specifically Parallel movement and pipelining are also presented together with the implementation results targeted for the ITU-T standard G.723.1 using Motorola DSP56309. The operation of the implemented speech coder is verified using the test vectors offered by the standard as well as using the peripheral interface circuits designed for the coder's real-time operation.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.729-737
• /
• 1994

A three-dimensional finite element model of a 20-pin plastic dual-in-line package(PDIP) plugged into a PCE has been developed by using the finite element code ANSYS. The model has been used for thermal characterization of the package during its normal operation under natural convection cooling. Temperature distributions in the package and PCB are obtained from numerical analysis and compared with experimentally measured data. Various cases are assumed and analyzed to study the effects of package and PCB materials on thermal characteristics of PDIP with and without aluminum heatspreader. Thermal dissipation capability of PDIP is greatly increased due to copper die pad/lead frame and heatspreader. However, thermally induced stresses in the package and fatigue life of chip are improved for PDIP with Alloy 42 die pad/lead frame and no heatspreader. It is also found that the role of PCB on thermal characteristics of PDIP is very imporatant.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.57-61
• /
• 2002

In this paper, the structural and thermal integrity of a Dual Mass Flywheel (DMFW) being developed by HMC is assessed with conventional FEM code. Some parts were modified in order to satisfy the SAE and RICARDO's assessment limit, and we found that FEM was valuable tools in developing new DMFW system.

• Earthquakes and Structures
• /
• 제15권4호
• /
• pp.383-393
• /
• 2018

In this study, seismic performance of low and medium-rise RC buildings with wide-beam and ribbed-slab were evaluated numerically. Moment resisting systems consisting of moment and dual frame were selected as structural system of the buildings. Sufficiency of moment resisting wide-beam frames designed with high ductility requirements were evaluated. Upon necessity frames were stiffen with shear-walls. The buildings were designed in accordance with the Turkish Earthquake Code (TEC 2007) and were evaluated by using the strain-based nonlinear static method specified in TEC. Second order (P-delta) effects on the lateral load capacity of the buildings were also assessed in the study. The results indicated that the predicted seismic performances were achieved for the low-rise (4-story) building with the high ductility requirements. However, the moment resisting frame with high ductility was not adequate for the medium-rise building. Addition of sufficient amount of shear-walls to the system proved to be efficient way of providing the target performance of structure.