• Journal of Haehwa Medicine
• /
• v.13 no.2
• /
• pp.187-196
• /
• 2004

Now many sustitution and false articles is used in korea instead of shanyao. To use shanyao correctly, we will make a quilitative certificational plan of shanyao to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source About a source of shanyao, though korea and china has a each other source, we think there is no problem in use of both. 2) Process In our country producing shanyao as medical use is a 'duanma', we can divide into peeling and non-peeling, drying at bulks and at briquets, steaming shanyao and fresh shanyao. Regardless of existence for peeling and steaming, a distributing shanyao is received a proper judgment. Like this result was expressed by insufficiency of standards about medical components or indicating components. We detected a reminding S02 more than 10 ppm. And this expresses that there ia a problum at a drying method. To suggest proper processing methods, a standard of quility will have to be made which the existence of peeling, difference of quility between 'changma' and 'duanma', drying method and exudation test with cutted thickness are adaptable. Besides, 'maoshanyao' and 'guangshanyao' of china is processed by various methods which decrease a medical effect such as too much soaking shanyao in water, steaming with a sulfur, too much peeling, So we must process shanyao like the next methods. (1) When harvesting, dig deeply not to cut off roots. (2) Not to peel, wash shanyao in a washing machine. (3) Dry to 50-60% degree at sunny place or drying machine. (4) To be easy for drying and exudation, cut off a thick piece with 5 mm (5) Dry perfectly at ding machine. 3) Quality3) Quality (1) Functional standards It is not Proper that 'guangshanyao' is used in china because it has a problem with quility on process of working, If they did not soak shanyao in water or heat with steam, it is the real situation that they cannot cutt off shanyao evenly. In conclusion, shanyao must be heavy, powdery with a perfectly non-peeling surface, section surface is yellow-white color, unequal and has no holes. (2) Physicochemical standards It is the real situation that we can not distinguish into quility of shanyao with established test because various workings which decrease medical effects is used. Therefore we suggest a testing standard of S02 which is used in bleaching. And testing standards relatived with decrease of medical effects must be established at once. It must that Dry on loss is less than 14.0%, content of ash is less than 6.0%. Content of acid-nonsoluble ash is less than 0.5%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agricultural medince.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.60-65
• /
• 2021

The recycling of titanium turning scraps requires the removal of cutting oil and other contaminants remaining on the surface. In this study, an experiment was conducted in which titanium scraps were cleaned by a combination of ultrasonic immersion-steam cleaning and subsequent drying at high temperature. To determine the removal mechanism of cutting oil, the contact angle between titanium surface and cutting oil was measured. The result confirmed the optimum condition of the immersion solution of the titanium turning scraps. In the case of immersion cleaning of Na4P2O7 aqueous solution, the degree of carbon removed in the cutting oil was the highest at 50℃, and it was confirmed that the carbon content obtained from the combination of steam cleaning and ultrasonic immersion-steam cleaning was lower than that from steam cleaning after ultrasonic immersion. The oxidation and decomposition behaviors of cutting oil were investigated using Thermogravimetric analysis (TGA) and the result was applied in the high temperature drying process. From the results of the high temperature drying tests, it was concluded that 200℃ is the optimal drying temperature.

• The Journal of Engineering Geology
• /
• v.22 no.2
• /
• pp.145-155
• /
• 2012

The matric suction and volumetric water content of Jumunin standard sand with a relative density of 60% were measured using an Automated Soil-Water Characteristic Curve (SWCC) apparatus during both drying and wetting processes. The test time for the drying process was longer than that for the wetting process, because the flow of water is likely to be protected by air trapped in voids within the soils during the drying process. Based on the matric suction and volumetric water content, the SWCC was estimated using the model proposed by van Genuchten (1980). For the drying process, the unsaturated fitting parameters ${\alpha}$, n, and m were 0.399, 8.586, and 0.884, respectively; for the wetting process, the values were 0.548, 5.625, and 8.220, respectively. The hysteresis phenomenon occurred in the SWCCs, which means the SWCC of the drying process is not matched with the SWCC of the wetting process. Using these unsaturated parameters, we estimated the Suction Stress Characteristic Curve (SSCC), based on the relationship between suction stress and the effective degree of saturation. The suction stress showed a rapid decrease when the matric suction exceeds the Air Entry Value (AEV). Therefore, the effective stress of unsaturated soils is different from that of saturated soils when the matric suction exceeds the AEV. The suction stress of the drying process exceeds that of the wetting process for a given effective degree of saturation. The hysteresis phenomenon was also recognized in SSCCs. The hysteresis phenomenon of SSCCs arises from that of SWCCs, which is induced by the ink bottle effect and the contact angle effect. In the case of a sandy slope, the suction stress is positive and acts to enhance the slope stability as the water infiltrates the ground, but is negative when the suction stress exceeds the AEV. The results obtained for the wetting process should be applied in analyses of slope stability, because the process of water infiltration into ground is similar to the wetting process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.4
• /
• pp.340-345
• /
• 2003

In order to choose the manufacturing method for extracting alginates from sea tangle, Laminaria japonica, three methods were applied. In Method I, alginates were extracted with NaOH solution from sea tangle powder and extracted alginates were precipitated and converted to alginic acid by $CaCl_2$ and HCI solution. Then alginic acid was converted to sodium alginates with $Na_2CO_3$ solution. Sodium alginates were precipitated with methyl alcohol and were resolved with hot water and this step was repeated three times. Method II was same to Method I except final step including that sodium alginates were precipitated and washed with methyl alcohol three times. Method III included that sodium alginates were extracted with $Na_2CO_3$ solution from sea tangle powder then sodium alginates were precipitated and washed with methyl alcohol three time. Extracting time increased with Increasing extracted alginates amounts but increasing rates were below $0.4\%/h.$ Alginates amounts recovered by Method III showed above 2 times more to those by Method I and II. Extracting time increased with increasing ash amount of sodium alginates but increasing rates were below $0.1\%/h.$ and that of sodium alginates extracted by Method III showed higher value $(5\%)$ than those by Method I and II. In the sodium alginates prepared by Method III, the amount of ash in alginates dried by air was $34.4\%,$ that by vacuum freeze drying was $47.8\%.$ Extracting time increased with decreasing average molecular weight (MW) and degree of polymerization (DP) of sodium alginates, MW and DP of alginates prepared by Method III were higher than those by Method I and II In same extracting time. Extracting time increased with decreasing rate of apparent viscosity change (SAV) of alginates solution, and SAV of alginates prepared by Method III showed higher value than those by Method I and II in same extracting time. SAV of alginates dried by air was higher than that by vacuum freeze drying. Relating equation among SAV MW and DP were MW = 60.066 (SAV) -93.950, DP =309.760 (SAV) -485.084 and MW = 0.914 (DP)+0.213.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.3
• /
• pp.53-63
• /
• 2008

The aim of this study was to validate the suitability of an digital image analysis (DIA) method to measure the degree of saturation in the unsaturated conditions. This study was carried out on the Joo-Mun-Jin standard sand. A one-dimensional sand column test was used in the constant water level condition to get the correlation equation between the color number ($C_n$) and the measured degree of saturation (5). In addition, the hanging wale. column technique to determine the soil-water charactenstic curve (SWCC) was performed in a Buchner funnel. The average degree of saturation ($S_{ave}$) in the SWCC could be obtained by substituting average color number at each suction head value with the $C_n\;-\;S$ correlation equation. Comparisons were made between the measured results by the hanging water column test and those obtained from DIA method. Results showed that the DIA method tested here provided fairly good saturation distribution values in the drying and wetting processes.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.155-159
• /
• 1983

Alpha-barley were prepared by means of soaking, heating, and drying treatment. The degree of gelatinization ${\alpha}-barley$ were determined. The yield of ${\alpha}-barley$ prepared by microwave heating, steaming, and autoclaving were in the range of 95-98%, whereas by boiling, only 74-89% of ${\alpha}-barley$ were obtained. The degree of gelatinization of ${\alpha}-barley$ prepared by 5 min microwave heating and 10 min and 20 min steaming were around 90%. Alpha-barley prepared by boiling, autoclaving and 30 min steaming showed above 95% of degree of gelatinization.

• Journal of the Korean housing association
• /
• v.1 no.2
• /
• pp.49-66
• /
• 1990

This study is a case study to grasp residents` trade-off preference and opinions for selected interior environmental attributes of muilti-family housing. Interiew with structured questionnaire was carried out through pilot and main survey. On the basis of the result of pilot survey, interior environmental attributes for the main survey were selected. Selected attributes were the size of each residential room, the degree of openness between two rooms and interior facilities. Among them, trade-off approach was applied to the size of each residential room and interior facilities. For the main survey. 45 housewives living in 31 pyung apartment of a selected construction company to grasp the residents` trade-off preference and opinions on the selected attributes. In terms of the size of each room, subjects wanted the room to be lager, whereas master bedroom smaller, and family bathroom larger, wheareas toilet near master bedroom smaller. In terms of the degree of openness between two rooms, the present degree of openness between private and service area such as living room and balcony, and second bedroom and adjacent balcony need to be more open, whereas the present degree of openness between living room and dining room and between living room and kitchen need to be more closed. The comparative orders of important intems were the ventilation facility in the bathroom, drying poles for clothes in the balcony, interior landscape, and workable for hand washing clothes. In conclusion, measurement of preference using trade-off approach about selected interior environmental attributes in post-occupancy evaluation was regarded as a promising evaluation method to grasp the practical and comparative preference under constraints comparing to the typical existing methods.

• Membrane Journal
• /
• v.15 no.4
• /
• pp.281-288
• /
• 2005

The hyaluronic acid (HA) with excellent biocompatibility can be combined with lactide, the ester dimer of polylactide, with good biodegradability to produce biocompatible materials applicable to drug delivery system. By freeze drying method, HA and lactide were crosslinked with crosslinking agent, 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide. Degree of lactide and EDC reaction was determined by the analysis of nuclear magnetic resonance (NMR) spectroscopy. The degree of lactide and EDC reaction increased and swelling ratio decreased as the mole ratio of lactide to HA or crosslinking agent concentration increased or reaction temperature decreased. The drug release experiment result from membranes having different degree of lactide reaction showed that drug release rate reduced in proportion to the degree of lactide reaction. The drug release experiment result from drugs having different hyrodphobicity showed that the more hydrophobic drug was released more slowly.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.2
• /
• pp.129-135
• /
• 2000

This study was attempted to develop dandelion tea under various roasting conditions. The quality properties of tea were evaluated by measuring soluble solid. total yield, pH, color value, turbidity, browning degree, and sensory evaluation induced by various roasting time and temperature. The total yield and soluble solid content were the highest at the roasting process at 23$0^{\circ}C$ for 10 min. pH value was higher in non-treatment than pre-drying treatment and was not different among the roasting times. L value was reduced with increasing roasting time. Turbidity and browning degree of dandelion tea were the highest at the roasting condition at 23$0^{\circ}C$ for 10 min. Palatability was the highest at the roasting condition at 23$0^{\circ}C$ for 5 min without pre-drying. The higher solid yield was obtained with an increase in roasting temperature. Turbidity and browning degree increased under the roasting conditions at 230 and 26$0^{\circ}C$, respectively. Palatability in sensory evaluation increased at the roasting condition at 26$0^{\circ}C$ for 10 min. The higher savory taste value was obtained with an increase in roasting temperature.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.375-380
• /
• 2008

We made an experiment of keeping extension of raw and semi-dried flounder (Pleuronectes herzensteini). Effect of with(WG) or without gill (OG), drying degree (20% drying：20D, 40% drying：40D) and storage temperature (5 and $10^{\circ}C$) and 0.1% chitosan-ascorbate (CA) treatment of vacuum packaging flounder on growth of contaminated microorganism during storage for 10 days were investigated. Total aerobacter (TA) in the OG-treated raw flounder was $0.3{\sim}0.5$ log cycle lower than that of WG-treated flounder and also, number of coliform (CF) and E. coli (CO) in OG were lower compared with WG. Number of TA,. Especially, the TA was $0.42{\sim}1.20$ log cycle lower compared with raw flounder. The TA of the raw flounder stored at $5^{\circ}C$ compared to $10^{\circ}C$ was $0.6{\sim}1.3$ log cycle lower. The growth of total aerobacter, coliform (and E. coli separated from raw flounder in tryptic soy broth were completely inhibited by 0.1% CA. But the growth of TA in the raw and 20% dried flounder was 1.5 log cycle inhibited by 0.1% CA, and the growth of CF and CO were also slightly inhibited. We did value raw sample that treated CA 0D and 20D, and did vaccum packaging at the $10^{\circ}C$ for 10 days, Sensory quality such as appearance, freshness, and texture and overall acceptability after cooking of the 0.1% CA-treated raw and 20% dried flounder were evaluated from good to very good, while CA non-treated products were evaluated to moderate.