• YAKHAK HOEJI
• /
• v.40 no.1
• /
• pp.25-35
• /
• 1996

Magaldrate. an antiacid was synthesized by reacting magnesium oxide, aluminum sulfate, and dried aluminum hydroxide gel. The optimum synthesis conditions based on the yield of t he product were established by applying Box-Wilson experimental design. It was found that the optimum synthesis conditions of Magaldrate were as follows: Reaction temperature; 61~$85{\circ}C$, concentration of two reactants. Mgo and $Al(OH)_3$: 16~19.8%, molar concentration ratio of two reactants, [MgO]/[$Al(OH)_3$]; 4.2~5.0, temperature of washing water; 36~$41^{\circ}C$ and drying temperature of the product: 76~$80^{\circ}C$. Magaldrate was synthesized under the optimum synthesis conditions and identified by analyzing the chemical composition, and by differential scanning calorimetry and X-ray diffraction method. The Magaldrate sample synthesis under these conditions was used to prepare 15.6% Magaldrate original suspension which was utilized to make 13% Magaldrate suspension dispered in various concentrations of eight types of suspending agents. The acid-neutralizing capacity of 13% Magaldrate suspension dispersed in 0.25% suspending agents was examined by Rosset-Rice method. The maximum pH was reached within 1 minute in all suspension tested, and duration maintained between pH 3~5 was decreased in the order of Na alginate Na silicate(meta) Veegum HV pectin agar>Na>CMC>xanthan gum>bentonite. It was found that the hysteresis loop area was increased with temperature in the case of Riopan Plus and the addition of agar, whereas the area was decreased with temperature in the case of the addition of Na alginate and xanthan gum. 13% Magaldrate suspension tends to sediment by the addition of bentonite.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.3
• /
• pp.287-299
• /
• 1997

Procurement, cutting, cleansing, freezing, freeze-drying, and demineralization of the allogeneic bone must be made under the germ-free stable condition without bacterial and/or viral contamination. Even thought the bone is procured under the germ free condition, we must have confidence on disinfection of all the solutions that come in contact with tissue during the whole procedure. Lots of antibacterial agents have been introduced for chemical sterilization. Recently ethylene oxide gas sterilization or radiation sterilization is frequently selected as a secendary sterilization procedure. The biological and biochemical response of the graft material differs with the type and concentration of the sterilizing agents, and various toxic reactions have been reported due to the graft material itself and the substance released by the chemicals. The authors conducted the Millipore filter test to observe the toxic effect on L929 fibroblasts according to the effect on activity of succinate dehydrogenase, during the secondary sterilization of the demineralized allogeneic bone powder with irradiation or ethylene oxide gas. The result were as follows : 1. Around the copper disk, positive control group, 10mm diameter discoloration was observed. 2. As same as the negative control group, the disk showed no discoloration. 3. The demineralized allogeneic bone which was sterilized with ethylene oxide gas or irradiation showed no cytotoxicity. 4. From this results, it is suggested that treatment with ethylene oxide gas or irradiation should be effective to sterilize the deminineralized allogeneic bone.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.35-44
• /
• 2005

In the world, most of the metal technologists were as called as adornment artists than other field of industrial arts strongly industrial characters functional materials and manufacturing technology many used in the present age. In the study, one of adornments researched and material character analyzed about Art Clay Silver. The shrinkage rate of shape was about 0.24%. A shrinking phenomenon drying time thought of evaporation of water linking bonding agents and powders. After calcination of Art Clay Silver, the EDX used that just Ag 100% analyzed a result from the surface assay in the room temperature. A binder with powder in the room temperature considered to disappear, because it was been fume and smoke at high calcined temperature. A study showed when handicrafted necklaces make by these characteristic as using in difficult and delicated operations rather than naturally and beautifully expressive products.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.11 no.1
• /
• pp.13-19
• /
• 2005

Biotechnological researches in Central Asian Research Institute of Sericulture were developed since 1981 when laboratory of artificial diets for mulberry silk­worm was created. The researches were directed not only to creation of accessible artificial diets (AD) for off-season mass rearing of economical beneficial insect and for industrialization of sericulture but also to obtaining of easy reproducible source of animal proteins, carbohydrates, lipids, enzymes, enzymes inhibitors and other metabolites - bioresource for manufacture of oriental medicine preparations. Space experiments with silkworms became possible with use of AD. These experiments used mulberry silkworm as high effective board test organism with outstanding developmental, reproductive and transgenic properties having impor­tant significance in future of cosmonautics. Introduction to practice of bioprotective and ecologically pure method of drying and sterilizing of green cocoons and by-products of silk manufacture allows to increase efficiency of cocoons reeling technology as well as to preserve nativity of biological active substances in mulberry silkworm pupae that is unachievable by traditional methods of raw material processing. New spheres of application of two important silk proteins - fibroin and sericin in medicine, cosmetics, for bio- and nanotechnology are opening with use of biotechnological approaches. At present the achievements and experience of R & D in these fields are used in creation of modern pests biocontrol agents. Schemes of efficient processing of cocoon raw material, by-products and wastes of sericulture and cocoon processing are devel- Institute of Physiology and Biophysics, Uzbek Academy of Sciences, I, Niyazov street, 700095, Tashkent, Uzbekistan. oped for obtaining of traditional and new consumer products.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.27-30
• /
• 2008

This study investigated the application of red muds, which were industrial wastes fired at 800℃, with a coloring agents. The results were summarized as following. The slumpflow, air content and unit weight volume were satisfied with each target values. The setting time was shortened on the case that 3 % of the red coloring agent and fired red mud were simultaneously replaced about 1 hour compared with the previous study which was 6 % of the red coloring agent was individually used. For the length change ratio caused by drying shrinkage and depth of neutralization on hardened concrete, they were declined when 3 % of the red coloring agent and fired red mud were simultaneously replaced compared with the previous study. On the measurement of forming colors, the case that 3 % of the red coloring agent and fired red mud were simultaneously replaced was similar to the previous study.

• KSBB Journal
• /
• v.31 no.4
• /
• pp.291-299
• /
• 2016

In this study, Indomethacin, the poorly water soluble drug, was selected and prepared dispersing oral disintegrating films according to the molecular weight of polyethylene glycol (PEG) which are sort of dispersing agents. Also the molecular weight and content of PEG were evaluated effect on the degree of dispersion, physical property and dissolution when making oral dispersing film containing indomethacin to find appropriate condition and suggested guidelines of making oral dispersing film. The appropriate dispersing ratio of the amount of surfactants and dispersing agent were 1% and 4%, also the stability dropped in the PEG molecular weight of 4000 or more. Drying time of oral dispersing film was $90^{\circ}C$ for 10 minutes to 12 minutes that dispersing film's property about flexibility, detachability were very good. The oral dispersion film's content used PEG 400 was $98.6{\pm}0.5%$ and the most uniform. As the molecular weight of PEG increased, dissolution time also increased. On the basis of evaluation parameter, PEG with 400~600 of molecular weight was selected as good dispersing agent in oral dispersing film. Therefore, it can be suggested guideline of preparation application study in oral dispersing film.

• YAKHAK HOEJI
• /
• v.35 no.4
• /
• pp.319-325
• /
• 1991

Aluminum phosphate gel was synthesized by reacting aluminum sulfate as a soluble aluminum salt to tribasic sodium phosphate in this study. The optimal synthesis conditions based on the yield of product were investigated by applying Box-Wilson experimental design. It was found that optimal synthesis conditions were as follows: Reaction temperature; $61~71^{\circ}C$, concentration of two reactants; 12.27~13.83%, concentration ratio of two reactants; [AI$_{2}$(SO$_{4}$)$_{3}$]/[Na$_{3}$PO$_{4}$]= 0.5, reaction time; 10.9~12.1 minutes, drying temperature of product; $60~72^{\circ}C$. Aluminum phosphate gel prepared by the optimal synthesis conditions was suspended with four types of natural and synthetic gums at the concentration of 0.375~1.5wv%. Their Theological properties of aluminum phosphate gels were examined with Haake-Rotovisco RV 20 rotational viscometer. It showed that the higher concentration of suspending agents and lower temperature, the higher viscosity. Aluminum phosphate gel suspended by pectin and agar showed plastic flow with rheopexy, and their gels suspended by sodium alginate and sod. CMC showed plastic flow with thixotropy.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.35-42
• /
• 2014

The efforts to reduce carbon emission have been made in many aspects and in road, the study to develop the construction method which will replace asphalt and cement is also underway. But given the low cost and high performance offered by cement, among many solidification agents, it's difficult to seek the competent alternative. Polymeric material has been used in various ways for its advantages including lightweight and easy process for complex function and generates less carbon emission, and thus it would possibly be efficient if it replaces soil pavement using cement. This study, using three different types of organic polymeric solidification agents with different solidification principle, is intended to identify the difference in strength depending on curing method, natural dry or oven dry. Applicability of organic polymeric solidification agents to walkway and bike lane was investigated and as a result of unconfined strength test, all of them satisfied the minimum strength requirements of bike lane. Furthermore, strength characteristics of soil pavement depending on variation of water content was evaluated to identify the relationship, thereby appropriate curing method using organic polymeric solidification agent is proposed.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.385-391
• /
• 2015

This study was conducted to develop a spray-dried garlic chives (Allium tuberosum) powder and to evaluate its quality characteristics depending on the treatment of steam blanching pretreatment $100^{\circ}C$, 3 min) and the addition of forming agents (dextrin (DE=10), ${\beta}$-cyclodextrin) during process. The steam blanching pretreatment showed an increase in $L^*$ value while a decrease in $-a^*$, $b^*$, $C^*$, and $h^o$ values of the powder. Moisture content and water soluble index were not affected by the treatment of steam blanching and the addition of forming agents, whereas the particle diameter was the smallest in the steam blanching treatment and dextrin addition. Chlorophyll, phenolic compound, and vitamin C content, and DPPH radical scavenging activity of non-pretreated powder were significantly higher than those of the steam blanching treated powders. However, there was no significant difference between the two forming agents. The sensory acceptability (color, smell, and overall acceptability) of powder treated with steam blanching were significantly higher than those of non-pretreated powders. Therefore, the steam blanching pretreatment of fresh garlic chives affected on the better quality characteristics of the spray-dried powders when compared with non-pretreated powder though it adversely affected the natural chemical quality of fresh garlic chives.

• Restorative Dentistry and Endodontics
• /
• v.35 no.3
• /
• pp.164-172
• /
• 2010

During a composite resin restoration, an anticipating contraction gap is usually tried to seal with low-viscosity resin after successive polishing, etching, rinsing and drying steps, which as a whole is called rebonding procedure. However, the gap might already have been filled with water or debris before applying the sealing resin. We hypothesized that microleakage would decrease if the rebonding agent was applied before the polishing step, i.e., immediately after curing composite resin. On the buccal and lingual surfaces of 35 extracted human molar teeth, class V cavities were prepared with the occlusal margin in enamel and the gingival margin in dentin. They were restored with a hybrid composite resin Z250 (3M ESPE, USA) using an adhesive AdperTM Single Bond 2 (3M ESPE). As rebonding agents, BisCover LV (Bisco, USA), ScotchBond Multi-Purpose adhesive (3M ESPE) and an experimental adhesive were applied on the restoration margins before polishing step or after successive polishing and etching steps. The infiltration depth of 2% methylene blue into the margin was measured using an optical stereomicroscope. The correlation between viscosity of rebonding agents and mciroleakage was also evaluated. There were no statistically significant differences in the microleakage within the rebonding procedures, within the rebonding agents, and within the margins. However, when the restorations were not rebonded, the microleakage at gingival margin was significantly higher than those groups rebonded with 3 agents (p < 0.05). The difference was not observed at the occlusal margin. No significant correlation was found between viscosity of rebonding agents and microleakage, except very weak correlation in case of rebonding after polishing and etching at gingival margin.