• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.3
• /
• pp.297-306
• /
• 2022

The acoustic emission (AE) is proposed as a feasible method for the real-time monitoring of the structural damage evolution in concrete materials that are typically used in the storage of nuclear wastes. However, the characteristics of AE signals emitted from concrete structures subjected to various environmental conditions are poorly identified. Therefore, this study examines the AE characteristics of the concrete structures during uniaxial compression, where the storage temperature and immersion conditions of the concrete specimens varied from 15℃ to 75℃ and from completely dry to water-immersion, respectively. Compared with the dry specimens, the water-immersed specimens exhibited significantly reduced uniaxial compressive strengths by approximately 26%, total AE energy by approximately 90%, and max RA value by approximately 70%. As the treatment temperature increased, the strength and AE parameters, such as AE count, AE energy, and RA value, of the dry specimens increased; however, the temperature effect was only minimal for the immersed specimens. This study suggests that the AE technique can capture the mechanical damage evolution of concrete materials, but their AE characteristics can vary with respect to the storage conditions.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3898-3906
• /
• 2023

The paper notes that the most common way of handling spent nuclear fuel (SNF) of power reactors is its temporary long-term dry storage. At the same time, the operation of the dry spent fuel storage facilities almost never use the modern capabilities of information systems in safety control and collecting information for the next studies under implementation of aging management programs. The author proposes a structure of an information system that can be implemented in a dry spent fuel storage facility with ventilated storage containers. To control the thermal component of spent fuel storage safety, a database structure has been developed, which contains 5 tables. An algorithm for monitoring the thermal state of spent fuel was created for the proposed information system, which is based on the comparison of measured and forecast values of the safety criterion, in which the level of heating the ventilation air temperature was chosen. Predictive values of the safety criterion are obtained on the basis of previously published studies. The proposed algorithm is an implementation of the information function of the system. The proposed information system can be used for effective thermal monitoring and collecting information for the next studies under the implementation of aging management programs for spent fuel storage equipment, permanent control of spent fuel storage safety, staff training, etc.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.22 no.3
• /
• pp.377-385
• /
• 2024

The concrete silo dry storage system, which has been in operation at the Wolsong NPP site since 1992, consists of a concrete structure, a steel liner plate in the inner space, and a fuel basket. The silo system's concrete structure must maintain structural integrity as well as adequate radiation shielding performance against the high radioactivity of spent nuclear fuel stored inside the storage system. The concrete structure is directly exposed to the external climatic environment in the storage facility and can be expected to deteriorate over time owing to the heat of spent nuclear fuel, as well as particularly cracks in the concrete structure. These cracks may reduce the radiation shielding performance of the concrete structure, potentially exceeding the silo system's allowable radiation dose rate limits. For specimens with the same composition and physical properties as silo's concrete structures, cracks were forcibly generated and then irradiated to measure the change in radiation dose rate to examine the effect of cracks in concrete structures on radiation shielding performance, and in the current state, the silo system maintains radiation shielding performance.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.103-107
• /
• 1989

To determine optimal sowing time of forage rape in southern areas of Korea, forage rape cv. Velox, the highest yielding variety among seventeen introduced varieties of forage rape, was grown under five different sowing times. The results obtained are summarized as follows: 1. Yield components such as plant length, number of branches and number of leaves etc. were highest at the sowing time of Sep. 14 and Sep. 24. 2. Plants sown at Sep. 14 and Sep. 24 also showed highest'fresh and dry matter yield. 3. As plants were grown under later sowing time, they showed higher values in content of crude protein and lower values in contents of crude fiber such as NDF, ADF, cellulose and lignin. 4. There was no relationship between variation of IVDMD and sowing time. Plants sown at Sep. 14 and Sep. 24 showed highest digestible dry matter yields.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.10
• /
• pp.1394-1398
• /
• 2000

This experiment was carried out to examine the seasonal changes in feed intake and feeding behavior in Korean spotted deer under farmed condition to obtain basic information for efficient feeding management. The seasonal daily gain was the highest (p<0.05) in summer and the lowest (p<0.05) in winter. Dry matter intake (DMI) was the highest (p<0.05) in spring (2,685 g/day) and the lowest in winter (1,929 g/day). Intake of roughage in the DMI was the greatest in spring and that in winter was significantly lower (p<0.05) than in spring. Also DMI, expressed in terms of metabolic body weight ($kgW^{0.75}$), was 85.5 g, 70.6 g, 70.9 g and 65.1 g for spring, summer, autumn and winter, respectively, and thus was the highest in spring and the lowest in winter (p<0.05). Deer exhibited similar eating patterns, comparatively short and frequent periods, in all seasons. They showed comparatively intensive patterns of rumination during midnight for autumn and winter and relatively continuous patterns of chewing activity during spring and summer. There were no significant differences in seasonal eating time and ruminating time. However, exercise time was the greatest for winter and the lowest for summer and there was a significant difference (p<0.05) between summer and winter. Although not significant, eating time per 100 gDM ingested tended to be short in spring and summer and long in autumn and winter. Ruminating time per 100 gDM ingested was the shortest (p<0.05) in spring compared with in other seasons. The conclusion can be drawn that since deer have seasonal differences in feed intake and feeding habits, it is necessary to establish and develop an efficient feeding system for deer.

• The Korean Journal of Malacology
• /
• v.15 no.1
• /
• pp.41-47
• /
• 1999

From September 1994 to April 1996, we observed the suspending time dependant meat increase (dry weight) for oysters at Pukman Bay in Korea. The oysters which suspended in September increased to 5 g in meat weight (dry weight) by January. Ones in June increased rapidly but lessened during summer and this stagnation of meat increase extended to autumn. It took long time to compensate for the loss of meat weight owing to spawning. Oysters suspended in July or August showed low growth or stagnation due to the high water temperature and spawning activities after suspending. However, meat weight showed sudden increasement after December and achieved 5 g at the late farm period. The meat increase of oysters suspended in October or November was very slow during entire growing period. Most of them did not achieved 5 g during farm period. The negative correlation was observed between meat growth and water temperature in September. Also, there was a high correlation between meat growth and chlorophyll-a. It was believed that deficiency of food organisms in the water column lead slow growth in terms of meat growth, particularly right after transplanting seed oysters to the farm. Our study suggests that proper time for transplanting oysters is between August and mid-September. However, the data indicate that good growth of oysters is depending upon amount of food available in the water column.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2000.10b
• /
• pp.53-59
• /
• 2000

This study was carried out to determine the effect of sowing time on the flowering, growth and yield of Schizonepeta tenutfozia Briquet. Emergence and flowering dates in the sowing time from March 30 to April 30 were earlier than those of the other sowing times. In the sowing time from March 30 to April 30, length and diameter of main stem, number of node per main stem, number of branch per plant and fresh and dry weight of stem were greater than those of the other sowing times. Yield components such as ear length, main stem length and diameter, branches per plant, number of node and ears per plant, yield of stem in fresh and dry were the highest at the sowing time from March 30 to April 30. Optimum sowing time of Schizonepeta tenuifolia Briquet were from March 30 to April 30 in southern areas of Korea.

• Journal of Animal Science and Technology
• /
• v.61 no.3
• /
• pp.170-181
• /
• 2019

This study aimed to investigate the effects of temperature and retention time of the pressurized steam chamber on the ruminal fermentation characteristics and nutrient degradability of corn flakes in three Korean native Hanwoo cows and three Holstein cows implanted with a ruminal fistula. Corn kernels were categorized into 13 groups based on the chamber temperature (range, $100^{\circ}C-116^{\circ}C$) and retention time (range, 700-950 s). The pH value was lowest in T1 regardless of breed. Propionate concentration was the highest in T2 (p < 0.05). Total-volatile fatty acid (VFA) concentration was slightly but not significantly greater in T2 than in other conditions. Dry matter (p < 0.05), starch, and crude protein (p < 0.05) degradability were the highest in T1. At different incubation times and with different breeds, dry matter, starch, and crude protein degradability of corn flakes were the highest in T1. Thus, the present results indicate that the optimal temperature and retention time of the pressurized steam chamber should be $100^{\circ}C-105^{\circ}C$ and 700-720 s.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.16-20
• /
• 2021

Since the durability evaluation for improving the durability of PEMFC polymer membranes is very important for the development of PEMFC, research and development of the polymer membrane durability evaluation protocol (AST) continues. Recently, DOE's polymer membrane chemical/mechanical durability evaluation AST was developed and applied to Nafion XL for review. In order to shorten the evaluation time, oxygen was used as a cathode gas instead of air, and it was finished in 144 hours. Since DOE AST has a large number of voltage changes with 45 seconds of humidification and 30 seconds of drying, the degradation of the electrode has more influence on the MEA durability. Therefore, one cycle time was lengthened with 60sec of wet/300sec of dry, and the drying time was made longer than the humidification time to further deteriorate the polymer membrane, and it was finished in 240 hours. It was confirmed that the DOE AST for evaluation of the durability of the polymer membrane was accompanied by electrode degradation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.26-34
• /
• 2008

This study focus on segmentation process that classifies road surfaces into 5 different categories, dry, wet water, icy, and snowy surfaces by analyzing asphalt-paved road images taken in daylight. By using the polarization coefficients, the proportions of horizontally polarized components to vertically polarized components, regions with over 1.3 polarization coefficients are classified as wet surfaces. Except for wet surfaces, the decision process a lies time-frequency analysis to other parts by using the third order wavelet packet transform. In addition, by using the average frequency characteristics of dry and icy surfaces from image templates, decide which is closer to a test image, and finally identify dry and icy surfaces. It is confirmed that the reposed estimation and segmentation of recognition on various images. This can be interpreted as an indication that image-only mad surface condition supervision is probable.