• Elastomers and Composites
• /
• v.43 no.3
• /
• pp.147-156
• /
• 2008

In this work, epoxy/carboxyl-terminated butadiene acrylonitirile (EP/CTBN) composites were prepared by employing a reinforcing filler, silica treated with silane coupling agent in different ratio by dry and wet method. Their curing characteristics, surface free energy, interface morphologies and mechanical properties such as tensile strength and impact resistance were carefully investigated. Differential scanning calorimetry(DSC) results showed that curing temperature was lowered with the increase of silane coupling agent because of the increase of relative curing agent cotent by filling the pores of silica. Wet method was proved to be more effective for lowering curing temperature of EP/CTBN composite. In general, surface free energy and impact resistance were increased with the increase of silane coupling agent in this work. Tensile strength, however, was observed to be decreased at 4 wt% of silane coupling agent. It was found that the dry method was proved to be preferable for pretreatment of silica with coupling agent.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.46-53
• /
• 2015

Paper strengthening system of PVAm (polyvinylamine) has been used with strong negative charge polymer for electrostatic neutralization due to strong positive charge of PVAm. Recently, because of the controversy caused by the possibility of remaining PAM monomers in white water, a search for paper strength agent that can substitute for PAM was suggested. Therefore, this study was carried out to evaluate a dry strength polymer of PVAm. Starch and CMC were used as a substitute for PAM. The dual polymer system of PVAm and anionic charge control agent such as anionic starch or CMC (carboxy methyl cellulose) were found to be very effective as strength agent compared to the chemicals based on acrylamide.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.21-29
• /
• 2011

Recently, the use of recycled fibers was increased in order to replace the virgin pulp for low production cost and forest conservation. However, the recycled fibers decreases drainage rate, papermaking efficiency and product quality by short fibers and low wettability because of hornification. To overcome the limitation of low drainage rate, the technology of organic fillers were applied. Wooden fillers gave high bulk and stiffness of paper, but they reduced the strength of paper. In order to improve strength properties 4 types of strength additives were added and analyzed. Cationic starch, branched strength additive, linear wet strength additive, and linear dry strength additive were used. The drainage rate and paper properties such as bulk, air permeability and tensile strength were measured. As results of analysis, addition of branch type of strength agent such as C-starch was effective than linear type of strength agent in the drainage rate. Nevertheless there was no effect on the drainage rate by adding the pretreated wooden fillers. By adding the pretreated wooden fillers, bulk, air permeability and tensile strength of handsheets were improved with low dosage than non-pretreated fillers.

• Geomechanics and Engineering
• /
• v.8 no.1
• /
• pp.17-31
• /
• 2015

An experimental program was performed to study the effects of cement stabilization on the geotechnical characteristics of sandy soils. Stabilizing agent included lime Portland cement, and was added in percentages of 2.5, 5 and 7.5% by dry weight of the soils. An analysis of the mechanical behavior of the soil is performed from the interpretation of results from unconfined compression tests and direct shear tests. Cylindrical and cube samples were prepared at optimum moisture content and maximum dry unit weight for unconfined compression and direct shear tests, respectively. Samples were cured for 7, 14 and 28 days after which they were tested. Based on the experimental investigations, the utilization of cemented specimens increased strength parameters, reduced displacement at failure, and changed soil behavior to a noticeable brittle behavior.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.166-167
• /
• 2013

Bottom ash, which is discharged through a wet process in a thermal power plant, contains much unburned coal due to quenching and much salt due to seawater. However, dry bottom ash discharged through a dry process contains low unburned coal and salt, and has light -weight due to many pores. Therefore, it is expected that it can be used as lightweight aggregate. This study deals with the basic properties of concrete used dry bottom ash as coarse aggregate. As a results, the concrete having high content of dry bottom ash aggregate showed high slump by using water reducing agent and its air content was within 5±1.5% as designed value, similarly to normal weight concrete. It also showed a lower compressive strength than 100% of crushed stone.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.300-303
• /
• 2004

In this study, the mixing contents of ceramic powder and of shrinkage-reducing agent (SRA) influencing on the strength properties of MMA-modified polymer paste were examined. Regardless of SRA content, the flexural. the compressive and the adhesive strengths of the MMA-modified polymer paste tended to increase as the mixing content of ceramic powder increased. On the other hand, those strengths of the polymer paste tended to decrease as the mixing content of SRA increased without regard to the paste content. Furthermore. the adhesive strength of MMA-modified polymer paste in a wet condition decreased about $30-40\%$ of that in an air-dry condition without regard to the mixing content of ceramic powder and SRA.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.318-326
• /
• 2015

A pre-treatment process is essential for getting high quality of digital textile printing(DTP). In this study, we have studied three kinds of carrageenan polymer(k-, ${\lambda}$-, i-Carrageenan) as a pre-treatment thickening agent for the first time. Alginate polymer was also examined and its results were compared with that of the three kinds of carrageenan polymer. To confirm the performance of each thickening agent, we examined for a sharpness, color strength and fastness(washing, rub, light). The result showed that ${\lambda}$-Carrageenan has superior property in sharpness with low viscosity and i-Carrageenan was excellent in the color strength among the pre-treatment agents. Washing fastness to color change and staining for the all samples were 4 or 4-5 grade. Both dry and wet rubbing fastness of the samples were 4-5 grade. However, ${\lambda}$-Carrageenan coated sample has the lowest grade in light fastness. As a result, we found the possibility of carrageenan polymer as pre-treatment agent.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.87-95
• /
• 2017

PURPOSES : The objectives of this study are to evaluate moisture sensitivity of various asphalt mixtures and to suggest an alternate method for the dynamic immersion test, which is used to determine the application of anti-stripping agent, by analyzing bond strength. METHODS : The bond strength of various asphalt mixtures such as hot mix asphalt, warm mix asphalt, and polymer-modified asphalt was evaluated by the ABS test. In order to characterize moisture sensitivity at different temperatures of the mixtures, the ABS test was conducted at $-10^{\circ}C$, $5^{\circ}C$, $20^{\circ}C$, $40^{\circ}C$, and $54^{\circ}C$ under both dry and wet conditions. The concept of the bond strength ratio was applied for objective moisture sensitivity analysis. Moreover, the bond strength characteristic was compared to the dynamic immersion test to suggest an alternate method to determine the application of anti-stripping agent. RESULTS AND CONCLUSIONS : Overall, the polymer-modified asphalt demonstrates the highest bond strength characteristic regardless of moisture condition and temperature. The bond strength characteristic displays a highly reliable linear relationship from $5^{\circ}C$ to $40^{\circ}C$, and the relationship could be used to predict bond strength at any intermediate temperature. Based on the analysis of bond strength and retained asphalt ratio, the bond strength value of 1254 kPa could be applied as a criterion for anti-stripping agent.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.241-248
• /
• 2019

In this study, improving the wash and rubbing fastness of a natural coloring matter from Madder extract dyed on Tencel nonwoven. The cationic finishing agent(RBP), nonionic finishing agent(HPX) and mordant(PAW) were used to improving the color fastness. The two types(exhaustion and pad-dry-cure) finishing process were investigated with various finishing agent concentration. The color strength, wash and rubbing fastness of Tencel nonwoven dyed with Madder extract have been evaluated by various dye concentration and finishing agent. The exhaustion process treated with the cationic finishing agent(RBP) was effective to improving washing and rubbing fastness.

• Fashion & Textile Research Journal
• /
• v.3 no.1
• /
• pp.48-52
• /
• 2001

The study was conducted to find out suitable flame proofing on silk fabrics and to examine closely the flame retardancy effect and the physical properties changes of the silk, which was dyed by natural dyes and synthetic dyes, treated with agent (Diphenylbutylamidophosphate (DPBAP)). The results of the study were as follows: 1) Silk could be treated with DPBAP easily soluble in water by means of simple Pad-Dry-Cure. 2) The add-on of silk fabrics dyed by natural dyes was more than that of silk fabrics dyed by synthetic dyes. 3) The silk fabrics dyed by india ink among natural dyes has more flame retardancy effect in before treating with flame proofing agent than in after treating with it. 4) The physical properties (stiffness and tensile strength) of the silk fabrics treated with flame retardancy agent were little changed.