• 제목/요약/키워드: dry construction

검색결과 711건 처리시간 0.022초

슬릿휜-관 열교환기의 설계조건에서 공기측 압력강하 산출 (Evaluation of Air-side Friction Characteristics on Design Conditions of Slit Fin and Tube Heat Exchanger)

  • 조성철;김창덕;김창업;권정태;임효재
    • 에너지공학
    • /
    • 제16권3호
    • /
    • pp.149-154
    • /
    • 2007
  • 본 연구에서는 슬릿 휜-관 열교환기의 공기측 압력강하 특성을 실험적으로 고찰하였다. 물을 작동유체로 사용한 기존의 실험은 공기측 압력강하에 대해 일관된 방법을 제시하지 못하고 있다. 따라서 본 연구에서는 R22를 적용하여 휜-관 열교환기의 전표면과 습표면에 공기측의 압력강하 특성을 나타내는 표준 방법을 제시하고자 하였다. 기존의 실험 상관식과 본 연구에서 제시한 실험 데이터를 증발기와 응축기의 설계조건에서 레이놀즈수와 f-factor의 관계식으로 나타내었다. 본 실험은 공기의 속도가 $0.38{\sim}1.6\;m/s$ 일 때 냉매의 질량 유속 범위를 $150{\sim}250\;kg/m^2s$하여 수행하였다.

소하천 수질평가를 위한 부착생물 조사 (Periphyton Survey for the Evaluation of Water Quality in a Small Stream before the Construction of an Artificial Lake)

  • 신재기;조경제
    • 환경영향평가
    • /
    • 제9권2호
    • /
    • pp.109-117
    • /
    • 2000
  • The dynamics of physico-chemical factors and biomass of epilithic attached algae was determined by bimonthly sampling in the Kyechon and Yudongchon situated in the upper part of Som River from March 1998 to February 1999. Among environmental factors, average of $NH_4$, $NO_3$, SRP and SRSi concentration ranged $8.9{\sim}86.6{\mu}g$ N/l, $663.9{\sim}2,018.1{\mu}g$ N/l, $0{\sim}15.0{\mu}g$ P/l and 1.6~2.6 mg Si/l, respectively. The contents of chlorophyll-a and organic matter per unit area, which ranged from 21.1 to 231.8 $mg/m^2$ and ranged from 5.2 to 52.6 $g/m^2$, respectively, showed very high in the spatial and temporal variations. Both were high in February and May and low in March seasonally. The fluctuation of epilithic biomass related the concentration of $NH_4$, SRP and current velocity. In relationship between biomass and current velocity, >200 and 100~200 mg chl-a/$m^2$ corresponded to <0.2 and <0.8 m/s, respectively. The evaluation of water quality with chl-a and organic matter of periphyton resulted on over eutrophic condition. Periphytic algae in a small stream were more effective as indicator of water quality than planktonic algae. More researches on periphytic algae in relation to water quality evaluation are needed.

  • PDF

물이끼(Sphagnum palustre) 생육이 가능한 인공습지 사례보고 (A Case Report on the Constructed Wetland for the Growth of Sphagnum palustre)

  • 홍문기;김재근
    • 한국환경복원기술학회지
    • /
    • 제16권6호
    • /
    • pp.93-107
    • /
    • 2013
  • Construction of an artificial wetland for the growth of Sphagnum palustre with emergent macrophytes (Phragmites australis, Typha angustifolia, and Zizania latifolia) was firstly tried and the growth of those plant components according to various environmental combinations has been monitored for three years. Above-ground dry weight of Z. latifolia ($1,500g/m^2$) was higher than T. angustifolia ($900g/m^2$) and P. australis ($500g/m^2$) under most environmental conditions. In overall, planted emergent macrophytes seemed to prefer polishing sand without moss peat as a substrate and relatively deep water-depth condition (20cm) rather than shallow water-depth (5cm). Despite of high calcium content in inflow water (> 15ppm) into the constructed wetland, S. palustre populations have survived in most experimental plots during the monitoring period. Substrate layer including moss peat with high surface-area might play a role as an ion-filter. After three years, relatively thicker litter-layer in Z. latifolia plots due to vigorous growth appeared to heavily depress S. palustre by physical compressing and complete shading processes. Most of all, for the continuous growth of S. palustre, physio-chemical characteristics of water and substrate must be carefully managed. In addition, companion emergent species should be also cautiously selected not to depress S. palustre by much litter production. We suggest P. australis and T. angustifolia as companion species rather than Z. latifolia.

수치사진측량기법을 이용한 토량환산계수 산정 (The Estimation of Soil Conversion Factor Using Digital Photogrammetry)

  • 김진수;서동주;이종출
    • 한국측량학회지
    • /
    • 제22권4호
    • /
    • pp.339-347
    • /
    • 2004
  • 본 연구에서는 택지조성공사가 실시되고 있는 대규모 현장을 대상으로 절$.$성토부 풍화암의 정확한 토량환산 계수를 산정하고자 한다. 이를 위해, 먼저 대상지 내의 절 성토부 각각 20개소를 굴착하고 굴착 후의 체적을 계산하였다. 그 결과, 교차에 대한 체적의 상대정확도는 평균 0.5%로 산출되었다. 또한, 계산된 체적에 의한 습윤 단위중량과 실내토질시험에 의한 함수비를 이용하여 정확한 토량환산계수를 산정하였다. 산정된 토량환산계수를 모래치환법에 의한 건조단위중량시험에 의해 결정된 토량환산계수와 비교 $.$분석한 결과, 미소한 차이를 나타내었다. 이는 불규칙한 굴착부분의 체적측정을 정밀수치사진측량기법을 적용하였으므로 현장시험의 신뢰성이 높고 토량환산계수 산정을 위한 합리적인 설계방법이라 판단된다.

초고층 건축물용 내화벽체 요구성능 및 개발방향 설정을 위한 기초연구 (A Basic Study on Required Performance and Development Direction of Fire Resistance Wall on High-rise Building)

  • 김대회;박수영
    • 한국화재소방학회논문지
    • /
    • 제25권4호
    • /
    • pp.1-7
    • /
    • 2011
  • 최근 초고층 건축물의 방재분야에 대한 관심이 증가하고 있으며, 특히 화재발생 시 고층으로 인한 피난시간의 증가에 대비하여 건축물내의 화재전파를 최소로 억제하고자 노력하고 있다. 방화구획은 건축물에서 화재전파를 억제하는 대표적인 방법으로 내화성능이 있는 벽체와 방화문을 이용하여 화재발생 시 해당구획내에서 연소가 종료되거나 타 구획으로의 화재전파시간을 증가시킴으로써 피난시간을 확보하게 된다. 그러나 현행 건축법에는 초고층건축물을 고려치 않은 최대 2시간 내화성능만은 요구하고 있어 초고층 건축물용 방화벽의 개발에 걸림돌이 되고 있다. 따라서 본 연구에서는 내화벽체의 성능등급에 대하여 검토하였으며, 향후 초고층 건축물용 내화벽체 개발을 위하여 내화성능, 시공성, 사용성 등을 고려한 제품개발 방향을 제시하였다.

SMAW 수중 다층용접시 용접부 특성에 관한 연구 (A Study on the effect of the multi-pass SMAW welding on the characteristic of the underwater welding areas)

  • 최기용;이상율;이보영;이병훈;이상용;박성두
    • Journal of Welding and Joining
    • /
    • 제16권4호
    • /
    • pp.55-62
    • /
    • 1998
  • While excellent joint quality has been obtained using dry chamber underwater welding methods, the size limitations imposed by this process restrict its use for underwater construction work. The wet underwater shielded metal-arc welding eliminates this restriction but suffers from poor weld properties by the 1-pass bead-on-plate welding due to the excessive diffusible hydrogen. On the other hand, in the wet underwater welding, it is well known that the quantity of diffusible hydrogen in multi-pass welded parts reduce to less than that in 1-pass welded parts. Therefore, in this paper, welding experiments are made the 3-pass bead-on-plate welds by using TMCP and normalized steel plates and E4301 and cellulose coated electrode. After that, The amounts of the hydrogen absorbed into the 3-pass welded area were measured according to the JIS Z 3118 specification. The microstructural changes as well as the microhardness distribution after the underwater 3-pass welding were also investigated using Vickers microhardness tester and S.E.M and O.M. The results indicated that the quantity of diffusible hydrogen in 3-pass welded areas was reduced little less than a half of one of that in 1-pass welded areas at the specific welding condition. As a result, the cold cracking of 3-pass welded areas decreased by reduced effect of diffusible hydrogen. In the underwater 3-pass welding, the micrography of cold cracking fracture surface showed mainly the cleavage of hydrogen embrittlement.

  • PDF

기후변화 시나리오 편의보정 기법에 따른 강우-유출 특성 분석 (Analysis of Rainfall-Runoff Characteristics on Bias Correction Method of Climate Change Scenarios)

  • 금동혁;박윤식;정영훈;신민환;류지철;박지형;양재의;임경재
    • 한국물환경학회지
    • /
    • 제31권3호
    • /
    • pp.241-252
    • /
    • 2015
  • Runoff behaviors by five bias correction methods were analyzed, which were Change Factor methods using past observed and estimated data by the estimation scenario with average annual calibration factor (CF_Y) or with average monthly calibration factor (CF_M), Quantile Mapping methods using past observed and estimated data considering cumulative distribution function for entire estimated data period (QM_E) or for dry and rainy season (QM_P), and Integrated method of CF_M+QM_E(CQ). The peak flow by CF_M and QM_P were twice as large as the measured peak flow, it was concluded that QM_P method has large uncertainty in monthly runoff estimation since the maximum precipitation by QM_P provided much difference to the other methods. The CQ method provided the precipitation amount, distribution, and frequency of the smallest differences to the observed data, compared to the other four methods. And the CQ method provided the rainfall-runoff behavior corresponding to the carbon dioxide emission scenario of SRES A1B. Climate change scenario with bias correction still contained uncertainty in accurate climate data generation. Therefore it is required to consider the trend of observed precipitation and the characteristics of bias correction methods so that the generated precipitation can be used properly in water resource management plan establishment.

MOVE.2 확장기법 적용을 통한 장기 부하지속곡선 구축 및 유황조건별 수체손상평가 (Construction of Long-term Load Duration Curve Using MOVE.2 Extension Method and Assessment of Impaired Waterbody by Flow Conditions)

  • 김경훈;권헌각;임태효;이규동;신동석;나승민
    • 한국물환경학회지
    • /
    • 제33권1호
    • /
    • pp.51-62
    • /
    • 2017
  • The purpose of this study is to evaluate on the applicability of Load Duration Curve (LDC) method using Maintenance of Variance Extension types 2 method and sampling data for efficient total maximum daily loads at the Nakbon-A unit watershed in Korea. The LDC method allows for characterizing water quality data such as BOD, TOC, T-N and T-P in this study at different flow regimes(or quarters). BOD usually exceeded the standard value (exceedance probability 50%) at low flow zone. On the other hand, TOC, T-N, T-P usually exceeded the standard value at dry and low flow zone. Seasonally all water quality variables usually exceeded the standard value at Q1(Jan-Mar) and Q2(Apr-Jun) zones. Improvement of effluent control from wastewater treatment plants are effective to improve BOD and T-P.

우리나라 수입(輸入) 침엽수재(針葉樹材) 시장구조(市場構造) 및 수종별(樹種別) 경쟁력(競爭力) (Structures and Competitiveness of Softwood Products in Korean Import Market)

  • 김외정
    • Journal of the Korean Wood Science and Technology
    • /
    • 제19권4호
    • /
    • pp.34-42
    • /
    • 1991
  • Protection of tropical forest affects on significant reduce of tropical hardwood supply, and softwood resources will be increasingly important for the timber security in Korea. U.S. softwood log was most favorite species for Korean softwood log importers in overall import conditions except price stablization and consistency of export policy. Reduced export volume from Pacific Northwest to Korean market has been immediately replenished by rediata pine from New Zealand and Chilean plantation. Siberian timber will hardly play major roles in Korean timber market unless budding structure. softwood plywood and softwood furniture uses are enhanced. Recent rapid rise of labor cost and reducing tariff rrate in Korea provided better opportunities for import lumber in building materials market. Dry dimension lumber was relatively profitable when processed from import U.S. soft-wood log while green lumber was favorable products processed from radiata pine log in Korean lumber market. This means U.S. softwood lumber would have better opportunity to market for '2${\times}$'4 studs when wood frame housing is introduced. On the other hand while radiata pine is competitive on temporary construction lumber such as supporter and concrete forming frame in Korea. Shortage of raw material for the new capacity of board plants in Korea will be it bottle neck. Major log export countries to Korea as U.S. New Zealand and Chile showed high trade intensity indices of composite hoard produces for Korean market. As Korea efforts to diversify import sources, and tariffs are reduced to 8% as scheduled by 1994. countries of scoring higher comparative advantages as Portugal. Brazil, Austria as well as New Zealand will have better opportunity to penetrate into promised Korean composites hoard market.

  • PDF

유수소통을 통한 태화강 적조해결 방안 연구 (A Study on Taehwa River Red Tide Solution through Stream Flow)

  • 조홍제;윤성규
    • 한국습지학회지
    • /
    • 제13권2호
    • /
    • pp.363-375
    • /
    • 2011
  • 최근 하수관거 매설과 하수종말처리장 등의 건설로 인해 도시하천의 수질이 크게 개선되고 있으나, 하 폐수 처리시설의 부족으로 하천으로 유입되는 다양한 오염물질은 수중생태계 교란과 적조를 발생시키고 있다. 울산 태화강의 하류부는 하폭이 크고 하상경사가 매우 완만한 감조하천으로써 갈 저수기에는 유속이 매우 느리게 된다. 게다가 약 1.2km 떨어져 있는 2개 교량의 전면기초로 된 교각보호공으로 인해 흐름이 정체되고 오염물질이 퇴적되어, 수년전부터 발생하고 있는 태화강 적조의 원인이 되거나 적조를 활성화 시키고 있다. 본 연구에서는 RMA2모형을 이용하여 두 교량의 교각을 독립기초로 개선하고 흐름을 소통시킬 수 있는 통수단면을 확보했을 때, 수리학적으로 개선될 수 있는 유속과 유량의 변화폭을 모의하였다. 그 결과 유속은 최대 약 103%, 유량은 최대 61% 증가하는 것으로 나타났다. 이는 적조를 직접 소멸시킬 수는 없으나 적조발생을 억제하거나 감소시킬 수 있으며, 오염물질의 퇴적을 막아 적조발생 원인을 근원적으로 제어할 수 있는 것으로 판단된다.