• 제목/요약/키워드: dry and wet milling

검색결과 65건 처리시간 0.03초

건식 및 습식 쌀가루에 쑥가루를 첨가한 쑥쌀빵의 품질 특성 (The Quality Characteristics of Rice-Mugwortbreads)

  • 김영인;한경선
    • 한국지역사회생활과학회지
    • /
    • 제11권1호
    • /
    • pp.1-8
    • /
    • 2000
  • The characteristics of rice-breads with wet-milling and dry-milling rice-flours were investigated. Rice-breads by wet-milling had a good fermentation than the breads by dry-milling. Also, the fermentation of mugwort rice-breads was lower than those. Rice-breads by dry-milling indicated the higher value in hardness and the lower value in springiness, cohesiveness and chewiness than rice-breads by wet-milling. Also, mugwort rice-breads was the higher value in hardness, springiness, chewiness and the lower value in cohesiveness than rice breads. The test of the sensory characteristics for rice-breads showed that moistness, springiness, chewiness was higher for rice-breads by wet-milling. The sensory characteristics of mugwort rice-breads were lower than those, of rice-breads except the chewiness. Overall quality of rice-breads by wet-milling was higher than that of rice-breads by dry-milling. The overall quality of mugwort rice breads was higher than that of rice-breads by wet-milling, but lower than that of rice-breads by dry-milling.

건식 및 습식제조 쌀가루로 제조한 증편의 팽화특성 (Expansion Characteristics of Jeungpyun by Dry and Wet Milling Rice Flours)

  • 김영인;김기숙
    • 한국식품조리과학회지
    • /
    • 제10권4호
    • /
    • pp.329-333
    • /
    • 1994
  • This study was conducted to examine the expansion characteristics of Jeung pyun prepared by wet-milling and dry-mining rice flours. The fermented time was reduced when the added water was in the higher percentage. The Microstructure of Jelungpyun examined by SEM had a better quality when the added water was 80% for the Jeungpyun by wet-milling and 100% for Jeungpyun by dry-milling. Generally the Jeungpyun by wet-milling had a good fermentation than the Jeungpyun by dry-milling.

  • PDF

건식 및 습식제분 흑미 쌀가루의 물리화학적 특성 (Effect of Dry and Wet Millings on Physicochemical Properties of Black Rice Flours)

  • 전현일;양은진;김영수;송근섭
    • 한국식품영양과학회지
    • /
    • 제37권7호
    • /
    • pp.900-907
    • /
    • 2008
  • 중간소재용 흑미 쌀가루 제조를 위한 조건을 검토하기 위하여 제분조건별 쌀가루의 이화학적 특성을 비교분석하였다. 흑미의 수분흡수속도상수($k_o$)는 $25^{\circ}C$에서 $0.013\;min^{-1/2}$, $35^{\circ}C$에서 $0.016\;min^{-1/2}$, $45^{\circ}C$에서 $0.018\;min^{-1/2}$로 수침온도가 높아짐에 따라 값이 증가하였고, anthocyanin 용출정도도 수침온도 상승과 수침시간 증가에 따라 크게 영향을 받았다. 일반성분과 anthocyanin의 함량은 건식쌀가루에 비해 습식쌀가루가 낮게 나타났으며 제분횟수의 증가에는 영향을 받지 않았다. 건식쌀가루의 평균 입도는 $379{\sim}288\;{\mu}m$로 습식쌀가루의 $336{\sim}253\;{\mu}m$보다 컸으며 제분횟수가 증가함에 따라 60 mesh 이상의 쌀가루 분포비율이 증가하고 쌀가루의 입도가 고르게 분포되는 경향을 보였다. 쌀가루 요오드 반응의 ${\lambda}max$$521{\sim}522\;nm$으로 제분조건에 큰 영향을 받지 않았으나, 아밀로스 함량을 제외한 전분손상도, 수분분용 해지수(WSI) 및 수분흡수지수(WAI)는 건식쌀가루보다 습식쌀가루에서 높았다. RVA 호화양상에서 습식쌀가루의 호화온도가 $46.1{\sim}46.4^{\circ}C$에 비하여 건식쌀가루는 $62.5{\sim}69.4^{\circ}C$로 훨씬 높았으며, 습식제분의 경우 제분횟수에 따른 차이가 뚜렷하게 나타나지 않았으나 건식제분에서는 5회 처리까지 호화 온도 감소 현상이 나타났다. 또한 건식 및 습식 쌀가루 모두 제분횟수가 증가하면서 trough, 최종점도 및 consistency는 감소하였고, setback과 breakdown은 건식쌀가루에서는 증가한 반면 습식쌀가루에서는 감소되는 상반된 양상을 보였다.

건식과 습식 제분조건에 따른 멥쌀가루의 특성 (The Properties of Rice Flours Prepared by Dry and Wet Milling Method)

  • 김은미
    • 한국식품조리과학회지
    • /
    • 제26권6호
    • /
    • pp.727-736
    • /
    • 2010
  • The purpose of this research was to compare the physicochemical compositions and morphological properties of five varieties of rice flours (RR, RGD, RSGD, RWDG, RWGD). RR was raw milled rice without washing, RGD was raw rice flour without soaking, RSGD was raw milled rice flour with 0 hr of soaking, RWDG was raw rice flour with 8 hr of soaking and grinding after drying, and RWGD was raw rice flour with 8hr of soaking and drying after grinding. The protein and lipid contents of wet milling rice flour (RSGD, RWDG, RWGD) were significantly lower than those of dry milling rice flour (RR, RGD). L and a values were significantly increased in wet milling rice flour, and b value was significantly increased in dry milling rice flour. Scanning electron microscopy (SEM) showed that RWDG and RWGD were distributed as separated fine particles in rice flours. The WBC of RWDG and RWGD were higher than those of other rice flours. Solubility was significantly increased according to the temperature, and swelling power of RWDG was higher than that of other rice flours at 50 and $60^{\circ}C$. Using RVA, the initial pasting temperature and setback of RWDG were lower and the peak viscosities of RSGD and RWDG were higher than those of other rice flours. Using a mixograph, peak times were not significantly different among the groups, wheras peak heights were significantly decreased in RSGD, RWDG, and RWGD. The peak width of RWGD was lower than those of other rice flours. Based on these findings, RWDG flour was less damaged, and had a lower setback and pasting temperature, which makes it an appropriate rice flour for commercial mass production.

쌀가루의 제분방법이 증편의 품질 특성에 미치는 영향 (Effect of Different Milling Methods of Rice Flour on Quality Characteristics of Jeungpyun)

  • 김영인;금준석;김기숙
    • 한국식품조리과학회지
    • /
    • 제11권3호
    • /
    • pp.213-219
    • /
    • 1995
  • 습식 및 건식으로 제분방법을 달리하여 제조한 4종류의 쌀가루로 증편을 제조하여 품질특성을 살펴본 결과는 다음과 같다. 1. 증편의 수분함량은 쌀가루 자체의 수분함량과 비슷한 경향으로 습식제품이 건식제품보다 높았고 가수량 100%인 경우가 80%인 경우보다 높았다. 2. 증편의 색도는 제품의 수분함량이 높을수록 L값은 증가하고 a값과 b값은 감소하는 경향이었다. 저장기간이 경과함에 따라서는 L값은 다소 감소하고 b값은 다소 증가하는 경향이었다. 3. 증편의 기계적 texture측정결과 hardness는 대체로 건식제품이 습식제품보다 높게 나타났고 springiness는 습식제품의 경우는 가수량 80%에서, 건식제품의 경우는 가수량 100%조건에서 더 높았으며 전반적으로는 습식제품이 건식제품보다 높게 나타났다. cohesiveness는 습식제품이 건식제품보다 높았고 chewiness도 습식제품이 건식제품보다 높았다. 4. 증편의 관능검사 결과 whiteness는 습식제품이 건식제품보다 높았고 가수량이 100%인 경우가 80%인 경우보다 높았으며 moistness는 습식제품이 건식제품보다 촉촉하게 평가되었고 가수량이 100%인 경우에 80%인 경우보다 촉촉한 정도가 좋았다. softness는 건식제품이나 습식제품 중 입자가 작은 D-J와 W-P제품이 더 부드러웠고 springiness는 기계측정의 springiness와 비슷한 경향으로 습식제품이 건식제품보다 탄력성이 좋게 평가되었다. chewiness도 습식제품이 건식제품보다 높게 나타났고 기계측정의 chewiness와 같은 경향이었다. 그리고 overallquality는 습식제품이 건식제품보다 더 바람직한 것으로 평가되었다.

  • PDF

건식 진동밀을 이용한 나트륨이온전지 양극활물질 합성 (Synthesis of cathode material for sodium ion batteries using dry vibration milling)

  • 이연우;김한준;강연희;김창삼
    • 한국결정성장학회지
    • /
    • 제27권2호
    • /
    • pp.70-74
    • /
    • 2017
  • 건식 진동밀과 습식 볼밀로 출발원료를 혼합/분쇄하여 나트륨이온전지용 양극활물질인 $Na_{2/3}(Ni_{1/3}Mn_{2/3})O_2$를 합성하여 특성을 비교하였다. 건식 진동밀로 혼합/분쇄한 분말은 습식 볼밀한 분말보다 더 미세한 $1{\mu}m$ 이하의 입자였으며, $875{\sim}900^{\circ}C$에서 열처리 하였을 때 단일상을 얻을 수 있었다. 또한 전지 특성도 건식 진동밀을 사용한 분말이 습식 공정으로 합성한 분말보다 방전용량이 크고 방전 전위도 높게 나왔다.

초다수성 국내쌀 품종의 분쇄방법에 따른 이화학적 특성 (Physicochemical Characteristics of Super-Yield Korean Rice Cultivar depending on Milling Condition)

  • 이나영;하기용
    • 한국식품영양학회지
    • /
    • 제28권6호
    • /
    • pp.1065-1070
    • /
    • 2015
  • 초다수성 가공용 품종인 보람찬 및 한마음 품종의 수분 함량, 수분결합도, 아밀로오즈 함량, 손상전분, 입도 분포 및 호화특성을 분석하였다. 국내 초다수성 품종의 습식 및 건식분쇄에 의한 쌀가루의 수분 함량은 보람찬 및 한마음의 경우, 각각 14.79, 13.56 및 7.98, 7.14%를 나타냈다. 수분결합도의 경우, 보람찬 및 한마음 시료는 습식과 건식분쇄에 의해서 각각 236.67, 231.35% 및 275.83, 279.73%를 나타내어 건식분쇄에 의해 수분결합도가 증가하는 것으로 확인되었다. 습식분쇄된 초다수성 쌀가루의 수분결합력은 대조구로 사용된 일반미의 수분결합력과 비교 시 낮게 나타나는 것으로 확인되었다. 건식분쇄에 의한 호품, 보람찬 및 한마음 품종의 아밀로오즈 함량은 각각 19.12, 19.55 및 19.59%를 나타내었다. 손상전분의 경우, 보람찬 및 한마음 시료의 경우 습식과 건식분쇄에 의해 12.51, 10.69 및 14.98, 15.22%를 나타내어 습식분쇄에 비해 건식분쇄했을 경우 전분손상도가 증가하는 것으로 확인되었다. 또한 습식분쇄된 초다수성 쌀가루의 손상전분은 대조구에 비해 낮게 나타났으나, 건식분쇄 시에는 손상전분 함량이 대조구에 비해 증가하는 것으로 확인되었다. 국내 초다수성 품종의 분쇄방법에 따른 입도 분포의 경우, 최빈값은 습식에 비해 건식으로 분쇄할 경우 입도가 높은 것으로 나타났다. 초다수성 품종인 보람찬, 한마음을 습식 및 건식분쇄한 쌀가루의 최고 점도는 각각 2,300, 2,319 및 3,352, 3,022 cP를 나타내었다. 최고점도 및 최종점도의 경우 습식분쇄한 초다수성 쌀가루 시료는 대조구에 비해 높은 값을 나타내었다. Setback의 경우, 초다수성 품종 중 건식분쇄한 보람찬 쌀가루의 경우 가장 낮은 값을 나타내었으나, 대조구와 비교했을 경우 초다수성 쌀가루의 setback 값은 대조구에 비해 높은 값을 나타내었다.

기계적 합금화법으로 제조된 고온 수전해용 Ni/YSZ 전극의 미세구조 특성 (Microstructural Characteristics of Ni/YSZ Cermet for High Temperature Electrolysis by Mechanical Alloying)

  • 박근만;채의석;홍현선;추수태
    • 한국재료학회지
    • /
    • 제14권10호
    • /
    • pp.743-748
    • /
    • 2004
  • Modified Ni/YSZ cermets for high temperature electrolysis were synthesized by the direct ball milling of Ni and YSZ powder. The ball milling was carried out in dry process and in ethanol with varying milling time. While the dry-milling decreased the average size from 65 to $80{\mu}m$, the wet-milling decreased the average size down to $10{\mu}m$. In addition, very fine particles less than $0.1{\mu}m$ were observed in the wet-milling condition. The subsequent process of cold-pressing and sintering at $900^{\circ}C$ for 2 h did not affect the particle size of dry-milled powder. The electrical conductivity of the dry-milled Ni/YSZ cermet showed the value of $5{\times}10^{2}\;S/cm$ and this value was increased to $1.4{\times}10^{4}\;S/cm$ after the sintering at $900^{\circ}C$ for 2 h.

고온 수전해 전극용 modified Ni/YSZ cermet 제조 및 전극특성 (Preparation and characteristics of modified Ni/YSZ cermet for high temperature electrolysis)

  • 채의석;박근만;홍현선;추수태;윤용승
    • 한국수소및신에너지학회논문집
    • /
    • 제15권2호
    • /
    • pp.98-107
    • /
    • 2004
  • Modified Ni/YSZ cermets for high temperature electrolysis were synthesized by dry or wet mechanical alloying methods. The Ni/YSZ composit particle was directly fabricated from the ball milling of Ni and YSZ powder or obtained from the reduction of NiO/YSZ particle after the ball milling of NiO and YSZ. In the case of the NiO/YSZ composite particle, the dry milling increased the average particle size whereas the wet milling decreased the size. The dry milling showed that fine YSZ particles were distributed over large Ni surfaces while Ni and YSZ particles similar in size were well mixed in the wet milling method. These features were the same in the Ni/YSZ composite particle prepared from Ni and YSZ powders. The electrical conductivity of the wet-milled Ni/YSZ cermet showed the highest value of $2{\times}10^2S/cm$ among the specimens and this value was increased to $1.4\times10^4S/cm$ after the sintering at $900^\circ{C}$ for 1 h.

Development of dry milling suitable rice cultivar to invigorate rice processing products

  • Jeung, Ji-Ung
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.10-10
    • /
    • 2017
  • Rice consumption has been continuously decreasing as the eating habits of Koreans have become westernized and diversified. The per capita annual rice consumption in Korea has dropped sharply from 136.4 kg in 1970 to 61.9 kg in 2016. The Korean government, therefore, has been trying to promote rice consumption by invigorating the processed food industry using rice flour. To facilitate the market for processed rice foods, it is essential to develop proper milling technology in terms of flour particle size and damaged starch content to produce high quality rice flour at competitive cost. Dry milling and wet milling are the two major processes used to produce rice flour. Although the dry milling process is relatively simple with a lower production cost, damaged starch content increases because of the high grain hardness of rice. In wet milling, the quality of rice flour is improved by reducing flour particle size as well as damaged starch content through soaking procedures. However, the production costs are high because of the additional expenses associated with the disposal of waste water, sterilization and drying of the wet flour. Recently developed technologies such as jet milling and cryogenic milling also require expensive investment and production. Therefore, developing new rice cultivars with dry milling adaptability as well as good processing properties is an important goal of rice breeding in Korea. 'Suweon 542' is a floury endosperm mutant line derived from sodium azide treatment on a high-yield, early maturing, and non-glutinous japonica rice cultivar, 'Namil'. Compared with the wild type, after dry milling process, the grain hardness of 'Suweon 542' was significantly lower because of its round and loosely packed starch granules. Also, the flour of 'Suweon 542' had significantly smaller particles and less damaged starch than 'Namil' and other rice cultivars and its particle size distribution was similar to a commercial wheat cultivar. Recently, through collaborations with nine universities and food companies, a total of 21 kinds of processed prototypes, using the dry milling flour of 'Suweon 542', were evaluated. In the production of major rice processing products, there was no significant quality difference between the flours prepared by wet milling and dry milling. Although the amount of water added to the dough was slightly increased, it was confirmed that the recipe applying the wet flour could be used without significant change. To efficiently transfer the floury endosperm characteristics of 'Suweon 542' to other commercial rice cultivars, it is essential to develop DNA marker tightly linked to the target gene. Association analysis using 70 genome-wide SSR markers and 94 F2 plants derived from 'Suweon 542'/'Milyang 23' showed that markers on chromosome 5 explained a large portion of the variation in floury grains percentage (FGP). Further analysis with an increased number of SSR markers revealed that the floury endosperm of 'Suweon 542' was directed by a major recessive locus, flo7(t), located in the 19.33-19.86 Mbp region of chromosome 5, with RM18639 explaining 92.2% of FGP variation in the F2 population. Through further physical mapping, a co-segregate and co-dominant DNA marker with the locus, flo7(t) was successfully developed, by which, thereby, breeding efficiency of rice cultivars having proper dry milling adaptability with high yield potential or useful functional materials would be improved. 'Suweon 542' maintained the early maturity of the wild type, Namil, which can be used in rice-wheat double cropping systems in Korea not only for improved arable land but also for sharing flour production facilities. In addition to the high susceptibility against major rice diseases, nevertheless, another possible drawback of 'Suweon 542' is the high rate of viviparous under prolonged rainfall during the harvesting season. To overcome susceptibility and vivipary of 'Suweon 542', the progeny lines, derived from the crosses 'Suweon 542' and 'Jopyeong', an early maturing rice cultivar with multiple resistance against rice blast, bacterial blight, and rice strip virus, and 'Heugjinju', a anthocyanin pigment containing black rice cultivar, were intensively evaluated. As the outputs, three dry milling suitable rice elite lines, 'Jeonju614', 'Jeonju615', and 'Jeonju616' were developed.

  • PDF