• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.10
• /
• pp.458-463
• /
• 2003

In order to develope piezoelectric transformer for the ballast of fluorescent lamp, a new shape and electrode pattern of piezoelectric transformer has been investigated in this work. The composition of piezoelectric ceramics was 0.95Pb(Zr$_{0.51}$Ti$_{0.49}$)O$_3$+0.03Pb(Mn$_{1}$3/Nb$_{2}$3/)O$_3$+0.02Pb(Sb$_{1}$2/Nb$_{1}$2/)O$_3$. The sample prepared by this composition system showed the characteristics which has about 1200 of relative dielecric constant, 1100 of the mechanical quality factor, 0.53 of the electromechanical coupling coefficient, 320 pC/N of the piezoelectric constant d$_{33}$, 0.3 % of the dissipation factor. Diameter and thickness of disk-type piezoelectric transformer was 45 mm and 4 mm, respectively. The driving and generating electrode with their gap of 1mm were fabricated on the top surface. But the common electrode was fabricated on the whole bottom surface. The electrode surface ratio of driving and generating part on the top surface ranges from 1.4:1 to 3:1. We investigated the electrical characteristics with the variation of the electrode surface ratio of driving and generating part in the range of load resistance of 100 $\Omega$～70 k$\Omega$. The set-up voltage ratio of this piezoelectric transformer increases with increasing both the electrode surface of driving part and the load resistance. The set-up voltage ratio at no load resistance was more than 60 times. On the other hand, the efficiency decreases with increasing the electrode surface of driving part. In the case of the electrode surface of both 1.4:1 and 2:1, maximum efficiency showed above 97 % at load resistance of 2 k$\Omega$. However, in the case of the electrode surface of 3:1, maximum efficiency showed about 94 % at load resistance of 3 k$\Omega$.>.>.>.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.4
• /
• pp.250-257
• /
• 2013

This paper introduces a failure analysis procedure that underpins real-time fault prognosis. In the previous study, we developed a systematic eventization procedure which makes it possible to reduce the original data size into a manageable one in the form of event logs and eventually to extract failure patterns efficiently from the reduced data. Failure patterns are then extracted in the form of event sequences by sequence-mining algorithms, (e.g. FP-Tree algorithm). Extracted patterns are stored in a failure pattern library, and eventually, we use the stored failure pattern information to predict potential failures. The two practical case studies (marine diesel engine and SIRIUS-II car engine) provide empirical support for the performance of the proposed failure analysis procedure. This procedure can be easily extended for wide application fields of failure analysis such as vehicle and machine diagnostics. Furthermore, it can be applied to human health monitoring & prognosis, so that human body signals could be efficiently analyzed.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.963-970
• /
• 2006

In this paper, we proposed a motion picture processor for using low-cost color super twisted nematic liquid crystal display(CSTN-LCD). The proposed processor apply a new driving scheme using SFP(Subgroup Frame Pattern), so we extends gray scale and eliminates flicker phenomenon. In addition, we apply the BFI (Black Field Insertion) to the design compensated for response time of a LC (Liquid Crystal). We use an edge enhancement and interpolation method to improve image quality of motion picture. The hardware architecture of proposed processor has been implemented and verified on a prototype FPGA board. The proposed method can be used in the display devices such as PDA(Personal Digital Assistants), mobile phone, and PMP(Portable Multimedia Player).

• Journal of ILASS-Korea
• /
• v.21 no.3
• /
• pp.155-161
• /
• 2016

Injected fuel pressure waves of a common rail injector with various current profiles supplied to the injecor were measured using Bosch method. In order to drive the common rail injector, the current in the solenoid should be controlled using what is known as a peak and hold pattern, which consists of a high current level with a short time duration (peak) in the first step and a low current level with a long time duration (hold) in the subsequent step. The current profile can be shaped by swithcing an injector driving power source with the peak and hold waves. The capture, compare and PWM (CCP) pin in the microprocessor was used to generate the combined peak and hold waves. The PWM square wave generated from the CCP pin has a duty ratio of 100% for the peak current and 10% or 30% for the hold pattern. Five patterns of the current profile were generated by combining the peak and hold wave. The common rail pressure is controlled at 75, 100, and 130 MPa. As the fuel rail pressure increases, the variations of the measured fuel injection pressure wave according to the current profiles decrease.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.503-508
• /
• 2012

Recently green house gas emission problem has been issued because $CO_2$ emission is known to cause global warming. Hence, introduces more stringent emission and fuel economy requirements in various countries, including Korea. In this research, $CO_2$ emission factor characteristics of in-use cars, which are the most dominant vehicle type in Korea, were studied, and 129 gasoline vehicles, 100 diesel vehicles, and 34 LPG vehicles were tested on a chassis dynamometer. In the tests, CO and $CO_2$ emissions as well as fuel reduction rates weremeasured. The tests were conducted in the CVS-75 mode, which has been considered for developing emission factors for regulating emissions from light-duty vehicles in Korea. Through experiments, correlations among displacement, fuel consumption efficiency, fuel type, mileage, driving pattern, and $CO_2$ emission were investigated.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.61-68
• /
• 2010

The objective of this study was to test the estimation possibility of driver's stress degrees with the HRV analysis. For this, first, HRV analysis was applied to the 5 driver's ECG signals which were acquired in 7 different stress situations. From this, the facts that HRV trend was different from that in long-distance driving and 6 parameters - meanRR, sdRR, HF, LF/HF, LFnorm, HFnorm were useful for the stress estimation in stress varying driving situation. Next, we designed 5 personalized linear regression models in which 6 HRV parameters were input and the outcomes were 7 different stress degrees. Finally, we tested each model for 5min-long 16 segments individually. Consequently, the models could not hit the stress degrees exactly in some segments but the correlation coefficients between original stress pattern and estimated stress pattern during entire driving showed reasonably high.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.7
• /
• pp.39-47
• /
• 2018

This paper confirms the risk of using smartphone through the analysis of collected usage pattern and proposes the smartphone intervention system in risk situations. In order to check the risk of smartphone usage, we made information collecting application and collected smartphone usage pattern from 11 experiment participants for two months. By analyzing smartphone usage pattern, we confirmed that about 12% of smartphone usage is being used in driving, walking, and on the street. In addition, we analyzed the response rate of smartphone notification in risk situations and confirmed that user responds the smartphone notifications in real-time even in risk situations. Therefore, it is required to present a system that intervenes the use of smartphone in order to protect smartphone users in risk situations. In this paper, we classify risk situations of using smartphone. Also, the proposed smartphone intervention system is designed to periodically detect risk situations. In risk situations, smartphone function can be restricted according to user setting of smartphone. And smartphone can be used normally when safe situation is restored.

• Journal of the Korea Society for Simulation
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2005

In the semiconductor manufacturing, yield enhancement is an urgent issue. It is ideal to prevent all the failures. However, when a failure occurs, it is important to quickly specify the cause stage and take countermeasure. Reviewing wafer level and composite lot level yield patterns has always been an effective way of identifying yield inhibitors and driving process improvement. This process is very time consuming and as such generally occurs only when the overall yield of a device has dropped significantly enough to warrant investigation. The automatic method of failure pattern extraction from fail bit map provides reduced time to analysis and facilitates yield enhancement. The automatic method of failure pattern extraction from fail bit map provides reduced time to analysis and facilitates yield enhancement. This paper describes the techniques to automatically classifies a failure pattern using a fail bit map.

• Journal of Korea Multimedia Society
• /
• v.19 no.7
• /
• pp.1216-1224
• /
• 2016

This study analyzed the montage pattern of e-book in a bid to include e-book in the film language system. To this end, this study targeted three pieces of e-books which reproduced the animation for theater use of Disney Company. This study did research on characteristics of montage in films, and kinds of film vectors, and defined it as 'Montage of Experience' according to media characteristics of e-book. This study deducted the montage pattern of 3 sorts of classification, and 10 sorts of detailed classification by doing research on the analysis object. This study has a significance in that it pioneers a new perspective in e-book research which has been biased towards a functional perspective. Analysis of the point of contact where the existing visual media, and new media meet with each other could be a driving force promoting the growth of the relevant industry, and this study thinks that the analysis of the point of contact is the research which is helpful to working out qualitative improvement of e-book contents.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.05
• /
• pp.120-122
• /
• 1993

This paper describes an improved FES system to restore paralyzed extremities in spinal cord injury patients. For composing stimulus pattern which is suitable for each muscle, electrical stimulus pattern creating system is also developed by using IBM-PC. In the improved portable FES system using V40 microprocessor, muscle fatigue can be decreased by selecting the stimulus frequency which is proper to the response characteristics of each muscle. Driving softwares for the portable FES system and the stimulus pattern creating system are programmed with assembler and C language. A multichnnel portable FES system is designed to minimize the sire and weight using a D/A converter and 32 channel multiplexer.