• 대한전자공학회논문지
• /
• 제24권3호
• /
• pp.478-485
• /
• 1987

Optimization of the sub-micron N-channel MOSFET with the LDD(Lightly Doped Drain)structure has been investigated. LDD devices with various length of n-region, n-dose and n-implantation species were fabricated for this purpose. It will be shown that LDD devices have lower substrate current by an order of magnitude and higher breakdown voltage than the conventional devices with comparable channel length. Optimized LDD structure has been found when the sidewall thickness is 2500\ulcorner and n-region is phosphorus implantd with the dose of 1.0E13/cm\ulcorner It has been found that transconductance degradation is less than 20%.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.53-56
• /
• 2004

The a-Si:H TFT using ferroelectric of SrTi $O_3$as a gate insulator is fabricated on glass. Dielectric characteristics of ferroelectric are superior to $SiO_2$and S $i_3$ $N_4$. Ferroelctric increases on-current, decreases thresh old voltage of TFT and also improves breakdown characteristics. The a-SiN:H has optical band gap of 2.61 eV, refractive index of 1.8~2.0 and resistivity of 10$^{13}$ - 10$^{15}$ $\Omega$cm, respectively. Insulating characteristics of ferroelectrics are excellent because dielectric constant of ferroelectric is about 60~100 and breakdown strength is over 1MV/cm. TFT using ferroelectric has channel length of 8~20${\mu}{\textrm}{m}$ and channel width of 80~200${\mu}{\textrm}{m}$. And it shows that drain current is 3.4$mutextrm{A}$ at 20 gate voltage, $I_{on}$ / $I_{off}$ is a ratio of 10$^{5}$ - 10$^{8}$ and $V_{th}$ is 4~5 volts, respectively. In the case of TFT without ferroelectric, it indicates that the drain current is 1.5 $mutextrm{A}$ at 20 gate voltage and $V_{th}$ is 5~6 volts. With the improvement of the ferroelectric thin film properties, the performance of TFT using this ferroelectric has advanced as a gate insulator fabrication technology is realized.zed.d.

• 대한전자공학회논문지SD
• /
• 제46권4호
• /
• pp.10-14
• /
• 2009

본 논문에서는 항복 전압 특성을 향상시키기 위한 사다리꼴 게이트 구조의 AlGaN/GaN HEMT구조를 제안하였으며 그 실현 가능성을 2차원 소자 시뮬레이터를 통해 조사하였다. 사다리꼴 게이트 구조의 사용으로 드레인 방향의 게이트 모서리 부근에서 나타나는 전계의 집중을 효과적으로 분산되는 것이 시뮬레이션 결과에서 확인 되었다. 제안된 사다리꼴 게이트 AlGaN/GaN HEMT 소자 구조에서 2DEG 채널을 따라 형성되는 전계의 피크값은 4.8 MV/cm 에서 3.5 MV/cm 로 기존 구조의 AlGaN/GaN HEMT에 비해 30% 가량 감소하였으며, 그 결과로 인해 항복 전압은 49 V 에서 69 V 로 40 % 가량 증가하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권2호
• /
• pp.63-68
• /
• 2003

The DC and RF characteristics of $In_{0.5}Ga_{0.5}P/In_{0.22}Ga_{0.78}As/GaAs$ p-HEMTs with a gate oxide layer of various thicknesses ($50{\;}{\AA},{\;}300{\;}{\AA}$) were investigated and compared with those of a Schottky-gate p-HEMT without the gate oxide layer. A prominent improvement in the breakdown voltage characteristics were observed for a p-HEMT having a gate oxide layer, which was implemented by using a liquid phase oxidation technique. The on-state breakdown voltage of the p-HEMT having the oxide layer of $50{\;}{\AA}$was ~2.3 times greater than that of a Schottky-gate p-HEMT. However, the p-HEMT having the gate oxide layer of $300{\;}{\AA}$ suffered from a poor gate-control capability due to the drain induced barrier lowering (DIBL) resulting from the thick gate oxide inspite of the lower gate leakage current and the higher on-state breakdown voltage. The results for a primitive p-HEMT having the gate oxide layer without any optimization of the structure and the process indicate the potential of p-HEMT having the gate oxide layer for high-power applications.

• ETRI Journal
• /
• 제34권6호
• /
• pp.962-965
• /
• 2012

In this letter, we propose a new RESURF stepped oxide (RSO) process to make a semi-superjunction (semi-SJ) trench double-diffused MOSFET (TDMOS). In this new process, the thick single insulation layer ($SiO_2$) of a conventional device is replaced by a multilayered insulator ($SiO_2/SiN_x/TEOS$) to improve the process and electrical properties. To compare the electrical properties of the conventional RSO TDMOS to those of the proposed TDMOS, that is, the nitride_RSO TDMOS, simulation studies are performed using a TCAD simulator. The nitride_RSO TDMOS has superior properties compared to those of the RSO TDMOS, in terms of drain current and on-resistance, owing to a high nitride permittivity. Moreover, variations in the electrical properties of the nitride_RSO TDMOS are investigated using various devices, pitch sizes, and thicknesses of the insulator. Along with an increase of the device pitch size and the thickness of the insulator, the breakdown voltage slowly improves due to a vertical field plate effect; however, the drain current and on-resistance degenerate, owing to a shrinking of the drift width. The nitride_RSO TDMOS is successfully fabricated, and the blocking voltage and specific on-resistance are 108 V and $1.1m{\Omega}cm^2$, respectively.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.553-554
• /
• 2006

In this paper, 77 GHz CPW power amplifier MMIC, which are consisted of a 2 stage driver stage and a power stage employing $8{\times}50um$ gate width, have been successfully developed by using 120nm $In_{0.4}AlAs/In_{0.35}GaAs$ Metamorphic high electron mobility transistors (MHEMTs). The devices show an extrinsic transconductance $g_m$ of 660 mS/mm, a maximum drain current of 700 mA/mm, and a gate drain breakdown voltage of -8.5 V. A cut-off frequency ($f_T$) of 172 GHz and a maximum oscillation frequency ($f_{max}$) of over 300 GHz are achieved. The fabricated PA exhibited high power gain of 20dB only with 3 stages. The output power is measured to be 12.5 dBm.

• Journal of Semiconductor Engineering
• /
• 제3권2호
• /
• pp.161-167
• /
• 2022

Electrical characteristics of LDMOS power device with LDD(Lightly Doped Drain) structure is studied with variation of the region of channel and LDD. The channel in LDMOSFET encloses a junction-type source and is believed to be an important parameter for determining the circuit operation of CMOS inverter. Two-dimensional TCAD MEDICI simulation is used to study hot-carrier effect, on-resistance Ron, breakdown voltage, and transient switching characteristic. The voltage-transfer characteristics and on-off switching properties are studied as a function of the channel length and doping levels. The digital logic levels of the output and input voltages are analyzed from the transfer curves and circuit operation. Study indicates that drain current significantly depends on the channel length rather than the LDD region, while the switching transient time is almost independent of the channel length. The high and low logic levels of the input voltage showed a strong dependency on the channel length, while the lateral substrate resistance from a latch-up path in the CMOS inverter was comparable to that of a typical CMOS inverter with a guard ring.

• 대한전자공학회논문지
• /
• 제23권1호
• /
• pp.65-73
• /
• 1986

Experiment have been conducted about thin oxide characteristics according to O2/N2 ratio needed for EEPROM cell fabrication. As a result, we think that there is no problem even if we grow oxide layer with large O2/N2 ratio and short exidation time and when the water is implated by As before oxidation, the oxide breakdown field is about IMV/cm lower than that is not implanted. Especially, the thin oxide characteristic seems to be affected largely by wafer cleaning and oxidation in air. On the basis of these, tunnel type EEPROM cell is fabricated by 3um CMOS process and its characteristic is studied. Tunnel oxide thickness(100\ulcorner is chosen to allow Fowler-Nordheim tunneling to charge the floating gate at the desired programming voltage and tunnel area(2x2um\ulcorneris chosen to increase capacitive coupling ratio. For program operation, high voltage (20-22V) is applied to the control gate, while both drain and source are gdrounded. The drain voltage for erase is 16V. It is shown that charge retention characteristics is not limited by leakage in the oxide and program/erase endurance is over 10E4 cycles of program erase operation.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.843-847
• /
• 2014

In Super Junction (SJ) MOSFETs, charge balance is the most important issue of the SJ fabrication process. In order to achieve the best electrical characteristics, such as breakdown voltage and on-resistance, the N-type and P-type drift regions must be fully depleted when the drain bias approaches the breakdown voltage, which is known as the charge balance condition. In conventional charge balance analysis, based on multi-epi process SJ MOSFETs, analytical model has only N, P pillar width and doping concentration parameter. But applying a conventional charge balance principle to trench filling process, easier than Multi-epi process, is impossible due to the missing of the trench angle parameter. To achieve much more superior characteristics of on-resistance in trench filling SJ MOFET, the appropriate trench angle is necessary. So in this paper, modulated charge balance analysis is proposed, in which a trench angle parameter is added. The proposed method is validated using the TCAD simulation tool.

• 한국정보통신학회논문지
• /
• 제9권3호
• /
• pp.576-581
• /
• 2005

강유전체$(SrTiO_3)$ 박막을 게이트 절연층으로 하여 수소화 된 비정질 실리콘 박막 트랜지스터를 유리 기판 위에 제조하였다. 강유전체는 기존의 $SiO_2,\;SiN$ 등과 같은 게이트 절연체에 비하여 유전특성이 매우 뛰어나 TFT의 ON 전류를 증가시키고 문턱전압을 낮추며 항복특성을 개선하여 준다. PECVD에 의하여 증착된 a-Si:H는 FTIR 측정 결과 $2,000cm^{-1}$과 $876cm^{-1}$에서 흡수 밴드가 나타났으며, $2,000cm^{-1}$과 $635cm^{-1}$은 $SiH_1$의 stretching과 rocking 모드에 기인한 것이며 $876cm^{-1}$의 weak 밴드는 $SiH_2$ vibration 모드에 의한 것이다. a-SiN:H는 optical bandgap이 2.61 eV이고 굴절률은 $1.8\~2.0$, 저항률은 $10^{11}\~10^{15}\Omega-cm$ 정도로 실험 조건에 따라 약간 다르게 나타난다. 강유전체$(SrTiO_3)$ 박막의 유전상수는 $60\~100$ 정도이고 항복전계는 IMV/cm 이상으로 우수한 절연특성을 갖고 있다. 강유전체를 이용한 TFT의 채널 길이는 $8~20{\mu}m$, 채널 넓이는 $80~200{\mu}m$로서 드레인 전류가 게이트 전압 20V에서 $3.4{\mu}A$이고 $I_{on}/I_{off}$ 비는 $10^5\~10^8,\;V_{th}$는 $4\~5\;volts$이다.