• 한국컴퓨터정보학회논문지
• /
• 제28권8호
• /
• pp.119-126
• /
• 2023

본 연구에서는 한국프로야구에서 수비수의 수비 능력을 객관적으로 평가하기 위한 새로운 모델을 제시하였다. 제안 모델에서는 2016년부터 2019년까지 한국프로야구 경기 데이터를 이용하여 구단, 수비 포지션별로 대표 수비수를 선정하여 수비 능력을 평가하였다. 수비력을 평가하기 위하여 포지션별로 수비 범위를 계산하고 계산된 수비지역을 분할하는 방법은 제안하였다. 포지션별 수비 범위는 같은 포지션의 수비수들이 타구를 아웃시킨 지점을 기준으로 컨벡스 헐(Convex Hull) 알고리즘을 이용하여 계산하였다. 포지션별 수비 범위를 이용하여 내야수, 외야수 모두에 대한 아웃전환점수, 승리기여점수를 기본 점수로 계산하였다. 또한, 내야수는 병살 점수, 외야수는 추가진루 점수를 따로 계산하여 합산하였다.

• 한국항해항만학회지
• /
• 제35권10호
• /
• pp.823-827
• /
• 2011

2016년 7월부터 강제 적용 예정인 목표기반 선박건조 기준(GBS)의 설계단계의 기능요건 중 잔류강도 평가 부분은 현재의 유조선설계, 건조 규칙인 공통구조규칙에는 아직 포함되어 있지 않은 실정이다. 기능요건에 포함된 잔류강도 부분은 충돌이나 좌초와 같은 해상사고시 발생가능한 선체손상을 고려하여 강도측면의 제한조건을 규정함으로써 사고시에도 일정부분 선박의 안전을 확보하려는 것이다. GBS에서 주로 다루고 있는 위험도에 근거하여 잔류강도를 평가하기 위해서는 다양한 손상에 대한 광범위한 평가 작업이 필요하다. 이때, 매번 비선형 유한요소해석을 수행하기보다 선체구조를 보강판 요소의 집합으로 보는 간이화된 강도 해석법의 하나인 Smith법이 유용할 것이다. 본 연구에서는 좌초사고로 인해 선저가 손상된 경우를 대상으로 Smith법을 적용하여 최종강도 평가를 수행하였으며, 3개의 화물창 구역을 모델링하여 수행한 비선형 구조해석 결과와의 비교를 통해 Smith법을 적용한 결과의 정도를 확인하였다.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.760-766
• /
• 2014

This paper represents a portable robot for use in the welding process of the double hulls in shipbuilding yards. It has 5 degrees of freedom and 3kg of payload. Its body weight is 17.3 [kg] so that human workers can carry it by hand to the work place. Its body is mainly made of magnesium and aluminum alloys. Since the robot is placed about 25m apart from its controller, EtherCAT is adopted for reliable connection between the robot and controller through a single light cable. RTX real-time kernel and KPA EtherCAT master are used to control the robot on a Windows XP environment. The performance of the developed robot is satisfactory to the requirement in welding tasks of U-type cells in shipbuilding yards.

• 로봇학회논문지
• /
• 제3권4호
• /
• pp.345-350
• /
• 2008

This study aims to propose the concept design of oil spill protection robot which can rapidly intervene to control the oil spillage situation at the sea. Taking into account the fact that a huge amount of oil is transported trans-continentally by oil tanker, none of industrialized countries are completely safe from the marine oil spill which results in social, economical and ecological damages to their communities. The employment of double hull-oil tanker, pipe line transporting can be most safe way. Yet complete prevention of oil spill is probably not realistic. Accordingly the alternative solution to control marine oil spill and minimize the damages caused by the incident using intelligent robot technology based on swarm control method is proposed. The main features of oil spill protection(OSP) robot is explained via following three perspectives. Firstly, from functional point of view, OSP robot system safely and efficiently replaces oil boom installation manually conducted by human workers with intelligent robot technology based on swarm control theory. For second, its modular architecture brings efficient storage of main components including oil boom and facilitates maintenance. For the last, its geometric form and shape enables whole system to be installed to helicopter, boat or oil tanker itself with ease and to rapidly deploy the units to the oil spill area.

• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.331-339
• /
• 2006

The objective of this paper is to calculate the fatigue strength for upper deck hatch corner insert plate of large container carriers without wave load analysis and global finite element analysis at the initial design stage. Wave load analysis and global F.E. analysis for three container carriers have been performed by GL(Germanischer Lloyd) procedure to propose the equation for hatch corner stress range which is the important factor in fatigue strength calculation. Considering the restraining effect of bulkhead, three types of equation, that is, single tight bulkhead, double tight bulkhead and support bulkhead have been proposed. Using the proposed equations, a simplified fatigue analysis based on GL rules has been performed for two container carriers of which fatigue strength analysis was carried out by GL. From the comparison between fatigue strength result of using the proposed equations and that of GL, it has been found that proposed stress range equations are useful for scantling of upper deck hatch corner insert plates for over 8,000 TEU class container carriers.

• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.122-133
• /
• 1999

완성되어진 블록을 이용한 탑재의 과정에서 발생하는 블록 경계간의 판재 겹쳐짐 현상, 과도한 간격 및 단차의 발생현상은 선박의 건조비용과 공수를 증가시키는 요인이 된다. 본 논문에서는 블록의 조립 및 탑재에 관한 시뮬레이션 시스템을 제안하고 이중 조립에 관한 시뮬레이션을 용접순서에 따라 용접변형 및 자중을 고려하여 유한요소해석을 ANSYS를 이용하여 수행하였다. 용접에 의한 변형은 실험에 의한 변형량을 이용한 등가강성에 따른 등가 하중을 사용하여 탄성적인 해석법을 수행하여 예측하였으며 선체 이중저 평블록을 패널 조립법에 근거한 조립순서에 따라 시뮬레이션을 수행하였다. 시뮬레이션을 통한 변형으로부터 조립순서에 따른 중간 제품의 형상의 변화에 의한 강성의 변화에 기인한 변형량의 차이를 확인 할 수 있었으며, 자중의 효과를 반드시 고려하여야 함을 확인 할 수 있었다.

• Journal of Computational Design and Engineering
• /
• 제1권4호
• /
• pp.243-255
• /
• 2014

The present study describes the development of control hardware and software for a mobile welding robot. This robot is able to move and perform welding tasks in a double hull structure. The control hardware consists of a main controller and a welding machine controller. Control software consists of four layers. Each layer consists of modules. Suitable combinations of modules enable the control software to perform the required tasks. Control software is developed using C programming under QNX operating system. For the modularizing architecture of control software, we designed control software with four layers: Task Manager, Task Planner, Actions for Task, and Task Executer. The embedded controller and control software was applied to the mobile welding robot for successful execution of the required tasks. For evaluate this imbedded controller and control software, the field tests are conducted, it is confirmed that the developed imbedded controller of mobile welding robot for shipyard is well designed and implemented.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.97-110
• /
• 1998

The numerical damping and dispersion error characteristics associated with difference schemes and a panel shift method used for the calculation of steady free surface flows by a panel method are an analysed in this paper. First, 12 finite difference operators used for the double model flow by Letcher are applied to a two dimensional cylinder with the Kelvin free surface condition and the numerical errors with these schemes are compared with those by the panel shift method. Then, 3-D waves due to a submerged source are calculated by the difference schemes, the panel shift method and also by a higher order boundary element method(HOBEM). Finally, the waves and wave resistance for Wigley's hull are calculated with these three schemes. It is shown that the panel shift method is free of numerical damping and dispersion error and performs better than the difference schemes. However, it can be concluded that the HOBEM also free of the numerical damping and dispersion error is the most stable, accurate and efficient.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권1호
• /
• pp.72-79
• /
• 2011

Typical results obtained by a newly developed, nonlinear time domain hybrid method for simulating large amplitude motions of ships advancing with constant forward speed in waves are presented. The method is hybrid in the way of combining a time-domain transient Green function method and a Rankine source method. The present approach employs a simple double integration algorithm with respect to time to simulate the free-surface boundary condition. During the simulation, the diffraction and radiation forces are computed by pressure integration over the mean wetted surface, whereas the incident wave and hydrostatic restoring forces/moments are calculated on the instantaneously wetted surface of the hull. Typical numerical results of application of the method to the seakeeping performance of a standard containership, namely the ITTC S175, are herein presented. Comparisons have been made between the results from the present method, the frequency domain 3D panel method (NEWDRIFT) of NTUA-SDL and available experimental data and good agreement has been observed for all studied cases between the results of the present method and comparable other data.

• 대한조선학회논문집
• /
• 제55권2호
• /
• pp.144-152
• /
• 2018

This study aims to establish a mathematical formula to provide rapid and safety estimation of the damaged double hull tankers under ship-ship collision. Difference in heights between the striking and struck ships 'h' and penetration depth 'x' were considered as the main parameters. In ship-ship interaction, Large oil tankers are selected as target struck vessels, and they are struck by Very Large Crude-Oil Carrier (VLCC) class oil tanker. The residual strength of damaged ship at several locations and collision scenarios were carried out using Intelligent Supersize Finite Element Method (ISFEM) which considers the progressive collapse behavior of ship hulls strength. Based on these results, satisfactory was achieved and empirical formula was successfully established using the regression analysis method by deploying the height difference 'h' and penetration depth 'x' as the observed parameters.