• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2012년도 춘계학술발표대회논문집
• /
• pp.343-344
• /
• 2012

With the increase of sensitive data and their secure transmission and storage, the use of encryption techniques has become widespread. The performance of encoding majorly depends on the computational time, so a system with less computational time suits more appropriate as compared to its contrary part. Double Random Phase Encoding (DRPE) is an algorithm with many sub functions which consumes more time when executed serially; the computation time can be significantly reduced by implementing important functions in a parallel fashion on Graphics Processing Unit (GPU). Computing convolution using Fast Fourier transform in DRPE is the most important part of the algorithm and it is shown in the paper that by performing this portion in GPU reduced the execution time of the process by substantial amount and can be compared with MATALB for performance analysis. NVIDIA graphic card GeForce 310 is used with CUDA C as a programming language.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2158-2167
• /
• 2018

This paper analyzed the magnetic field produced by the cylindrical stator coils of permanent magnet spherical motor (PMSM). The elliptic equations about the vector magnetic potential were given. Given that the eddy current effects are neglected, the magnet field of the PMSM is regarded as irrotational field, which can be calculated by scalar magnetic potential. The current density of cylindrical stator coil was proposed based on the definition of current density. The expression of current density of stator coil was obtained according to the double Fourier series decomposition and spherical harmonic functions. Then the magnetic flux density for scalar magnetic potential was derived. Further, the influence of different parameters on radial flux density was also analyzed. Finally, the results by the analytical method in this paper were validated by finite element analysis (FEA).

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.179-196
• /
• 2013

An experimentally measured single footfall trace (SFT) from a walking subject needs to be extended into a continuous force curve, which can then be used as load for floor vibration serviceability assessment, or on which further analysis like discrete Fourier transform can be conducted. This paper investigates the accuracy, applicability and parametrical sensitivity of four extension methods, Methods I to IV, which extends the SFT into a continuous time history by the walking step rate, stride time, double support proportion and the double support time, respectively. Performance of the four methods was assessed by comparing their results with the experimentally obtained reference footfall traces in the time and frequency domain, and by comparing the vibrational response of a concrete slab subjected to the extended traces to that of reference traces. The effect of the extension parameter on each method was also explored through parametrical analysis. This study finds that, in general, Method I and II perform better than Method III and IV, and all of the four methods are sensitive to their extension parameter. When reliable information of walking rate or gait period is available in the test, Methods I or II is a better choice. Otherwise, Method III, with the suggested extension parameter of double support time proportion, is recommended.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.556-560
• /
• 2001

In this paper, a soft-switching discontinuous mode (DCM) power factor corrected (PFC) converter is analyzed by applying the double Fourier series expansion. It is found that the fundamental component and higher-order harmonics included in the input current waveform are obtained by the Fourier series expansion of the mean value of the inductor current. From the theoretical analysis, a new method removing the distortion of the input current waveform is proposed. In spite of an open loop system, the proposed method makes a great improvement of the total harmonic distortion even if the ratio of output voltage to input voltage is very low.

• 대한기계학회논문집
• /
• 제8권5호
• /
• pp.408-415
• /
• 1984

본 연구에서는 기존연구에 비하여 해의 형태가 간단하고 비교적 오차가 적은 해를 구하기 위하여 MorleyKoiter의 등방성 원통셸의 변위 및 응력상태를 2중 Fourier 급수를 적용하여 해석하였으며 수치예를 통하여 이들 값의 직교이방특성 및 셸형상에 따른 영향을 고찰하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.392-396
• /
• 2014

New organic-inorganic composite of 2,4-dihydroxybenzophenone (BP-1) encapsulation into dodecylbenzenesulfonate (DBS) modified layered double hydroxide (LDH) was successfully prepared. The surface, structural, thermal and absorption properties of the BP-1/DBS-LDH nanohybrid was characterized by BET analysis, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TG) and diffuse reflectance UV-Vis absorbance spectra (DRUV-vis). The interlayer configuration of composite and the adsorption mechanism of BP-1 on MgAl-DBS-LDH were discussed. It was suspected that DBS anions located in the form of monolayer arrangement with a $75^{\circ}$ anti parallel angle between dodecylbenzenesulfonate chain axis. The diffuse reflectance UV-Vis absorbance results revealed that the UV absorbing wavelength of BP-1/DBS-LDH evidently extends to about 400 nm, which shows that the BP-1/DBS-LDH has the potential application as a UV absorber.

• 한국전자파학회논문지
• /
• 제18권6호
• /
• pp.656-663
• /
• 2007

본 논문은 접지된 2중의 유전체 평면 사이에 변화하는 저항율을 갖는 저항 띠 격자 구조로 임의의 각도로 입사되는 E-분극 전자파 산란 문제를 모멘트 법으로 해석하였다. E-분극 산란에서는 저항 띠의 모서리 양끝에서 유도되는 전류 밀도가 매우 높을 것으로 예측되므로, 이 특성과 일치하는 기저 함수를 직교 다항식 일종인 2종 Chebyshev 다항식의 급수로 전개하여 수치 해석하였다. 산란 전자계는 주기적인 구조에 대응시킬 수 있는 Floquet 모드 함수의 급수로 전개하였고, 미지의 계수를 구하기 위하여 경계 조건을 적용하였다 또한, Fourier-Galerkin 모멘트 법을 적용함으로써 접지된 2중의 유전체 사이에 다양한 저항율을 갖는 저항 띠에 대해 기하광학적인 정규화 된 반사 전력에 관한 스트립 폭과 주기, 입사각의 영향 등을 수치 해석하였다.

• 한국인터넷방송통신학회논문지
• /
• 제23권3호
• /
• pp.71-76
• /
• 2023

본 논문에서는 접지된 2중 유전체층 사이의 저항띠 격자구조에 의한 TE(transverse electric) 산란문제를 전자파 수치해석 방법으로 알려진 FGMM(fourier galerkin moment method)를 이용하여 해석하였다. 경계조건들은 미지의 계수를 구하기 위하여 이용하였고 산란 전자계는 Floquet 모드 함수의 급수로 전개하였으며, 저항띠의 해석을 위해 저항 경계조건을 적용하였다. 전반적으로 저항율이 작으면 저항띠에 유도되는 전류밀도의 크기가 증가하였고, 반사전력도 증가하였다. 균일 저항율을 가지는 경우, 유전체층의 비유전율이 증가하거나 또는 유전체 층의 두께가 증가할수록 반사전력은 감소하였다. 본 논문에서 제안된 구조에 대한 수치결과들은 기존 논문의 수치해석 결과들과 비교하여 매우 잘 일치하였다.

• 한국수자원학회논문집
• /
• 제46권9호
• /
• pp.909-919
• /
• 2013

본 연구에서는 실내실험을 통하여 식생의 변화에 따른 하도의 수리학적특성, 저수로의 변화, 사주의 거동, 하안의 안정성 등을 정량적으로 파악하였다. 실내실험은 기존에 인공식생 대신에 수로에서 실제식생인 알팔파를 성장시켜서 수행하였다. 식생대에서는 유속이 매우 느리며, 저수로의 이동이 감소하였다. 2중 퓨리에 해석 결과, 교호사주의 특성을 나타낸 1-1모드의 진폭이 지배적이지만, 시간이 증가하면서 복렬사주의 특성을 나타내는 2-2와 2-3모드의 진폭이 증가하였다. 식생에 의하여 저수로가 고착화 되어 하도의 안정성이 증가하고, 하도 내 사주의 이동속도는 감소하지만, 하상이 불규칙하게 변하면서, 사주의 수는 증가하였다. 식생의 밀도가 증감함에 따라 하안의 안정성은 증가하였다. 식생의 밀도가 증가함에 따라 유사의 유출량과 유출량의 변동성이 감소하였다. 또한 망상화 강도는 감소하지만, 하도의 상관계수와 하상의 기복지수(BRI)는 증가하는 특성을 보여주었다.

• Earthquakes and Structures
• /
• 제18권3호
• /
• pp.297-312
• /
• 2020

The KiK-net by NIED is a vertical array measurement system. In the database of KiK-net, singular pulse waves were observed in the seismic record at the borehole of TTRH02 during the mainshock (the magnitude of Japan Meteorological Agency (M_J) 7.3, M_W 6.8) and aftershock (M_j 4.2) of Tottori-ken Seibu earthquake in 2000. Singular pulse waves were also detected in the seismic records at the borehole of IWTH25 during the Iwate-Miyagi Nairiku earthquake in 2008 (M_J 7.2, M_W 6.9). These pulse waves are investigated by using the wave shape analysis methods, e.g., the non-stationary Fourier spectra and the double integrated displacement profiles. Two types of vibration modes are discriminated as the occurrence mechanism of the singular pulse waves. One corresponds to the reversal points in the displacement profile with the amplitude from 10^-4 m to 10^-1 m, which is mainly related to the fault activity and the amplification pass including the mechanical amplification (collision) of the seismograph in the casing pipe. The other is the cyclic pulse waves in the interval of reversal points, which is estimated as the backlash of the seismograph itself with the amplitude from 10^-5 m to 10^-4 m.