• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.305-316
• /
• 2021

Construction accidents occur due to a number of reasons-worker carelessness, non-adoption of safety equipment, and failure to comply with safety rules are some examples. Because much construction work is done outdoors, weather conditions can also be a factor in accidents. Past construction accident data are useful for accident prevention, but since construction accident data are often in a text format consisting of natural language, extracting construction hazards from construction accident data can take a lot of time and that entails extra cost. Therefore, in this study, we extracted construction hazards from 2,026 domestic construction accident reports using text mining and performed a seasonal analysis of construction hazards through frequency analysis and centrality analysis. Of the 254 construction hazards defined by Korea's Ministry of Land, Infrastructure, and Transport, we extracted 51 risk factors from the construction accident data. The results showed that a significant hazard was "Formwork" in spring and autumn, "Scaffold" in summer, and "Crane" in winter. The proposed method would enable construction safety managers to prepare better safety measures against outdoor construction accidents according to weather, season, and climate.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.427-431
• /
• 2008

Recently, the thoughts of Employees about the concept of workspace changes a job for a whole life time into the temporary job for an own' career development. To solve the problem, it causes the introduction of Fun Management among Domestic Corporations as the research for a fun and good workspace and the interest for the organization performance through it are increasing. However, the introduction possibility based on enough comprehension for various problems such as the strict relationship in the workspace, the rigid situation on construction site, the increase in the safe accident and the social avoidance phenomena for the employment to construction field in case that the fun management is introduced into domestic construction industry in the future is considered. Therefore, this study to propose the possibility and direction regarding the future fun management, when introduced into the domestic construction industry, by surveying and analyzing the common problems between The present state of the fun management method which is introduced and applied to other industries in advance and the performance process of the fun management which introduced and applied to the domestic construction corporations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.235-243
• /
• 2022

A total of 97,623 ships were registered in Korea in 2019. Among these, 65,835 vessels, accounting for approximately 67 % of the total number of ships, were registered as fishing vessels. As with the proportion of fishing vessels, the frequency of marine accidents is also high. In 2020, 2,331 of 3,535 accidents occurred on fishing vessels. Hence, various institutional arrangements are required for improving the safety of domestic fishing vessels. In this study, we examined domestic and international regulations on domestic and foreign control performance related to fishing boats for improving the safety of fishing boats. Additionally, the ratio of the rudder area of 153 fishing boats operating in Korea was investigated to examine the current status of the rudder area design of fishing boats whose design standards have not been clearly established compared to fishing boats. Resultantly, we statistically confirmed that most fishing boats were designing rudder areas because they did not meet international standards. In the future, these analysis results can be used as basic data to prepare rudder area design standards for improving the maneuvering performance of domestic fishing boats.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.145-154
• /
• 2013

HNS, including crude oil and products, shipments have increased. The risk analysis of HNS has assumed the importance, especially in maritime transportation area. There are various forms and kinds of HNS and the consequences of an accident are serious. In order to provide practical measures for preventing accidents, this study analyses the potential risks of HNS on maritime transportation accidents at domestic sea by using Event Tree Analysis. This study carries out risk assessment with F-N curve and risk matrix focusing on liquid cargo carriers (Oil and Products Tanker, Chemical Tanker, LPG/LNG Tanker, etc.). Explosion and sinking, suffocation indicate high consequence when on collision represent high probability. Improving human errors should be the main factor to mitigate risk on human lives.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.125-134
• /
• 2011

In order to reconstruct vehicle-pedestrian collision accidents, this paper presents a fuzzy tool to estimate accurately the impact velocity of the vehicle using parameters which could be easily collectable at the accident scene. The fuzzy rules and membership functions were set up using number of over 200 domestic and foreign data from accidents and empirical tests and 700 data from multibody simulation experiments. The developed fuzzy tool deduces the category of pedestrian trajectory and impact speed of the vehicle using 4 membership functions and 2 logic rules. The membership function of throw distance was differently set according to the deduced category of trajectories. The implemented fuzzy program was validated through comparing with the domestic and foreign empirical data. The output results agree very well in impact velocities of vehicle resulting the accuracy and usefulness of the developed tool in the reconstruction analysis of vehicle-pedestrian collision accidents.

• Journal of Pharmacopuncture
• /
• v.23 no.4
• /
• pp.201-211
• /
• 2020

Objectives: The purpose of this study is to comprehensively review Korean domestic studies and investigate the research trends of pharmacopuncture therapy on cervical pain caused by traffic accidents. Methods: Domestic studies between February 1999 and May 2020 from four Korean databases were searched with combinations of keywords 'cervical pain', 'traffic accident', 'whiplash injury', and 'pharmacopuncture'. Results: 17 studies were selected for review, including 7 randomized controlled trials, 5 retrospective observational studies, 3 case reports, and 2 non-randomized controlled trials. Each study was reviewed by published year, study type, types of pharmacopuncture solutions, selected acupuncture points, dosage of pharmacopuncture solutions, frequency of treatment, concurrent treatments, outcome measurements, and the effectiveness of pharmacopuncture therapy. The results are as follows: (1) It showed that the total number of published studies had increased slightly in the last 10 years compared to the previous decade. (2) The pharmacopuncture solutions used in the studies were in the following order: Bee-Venom (蜂毒), Jungsongouhyul (中性瘀血), Hwangryunhaedoktang (黃連解毒湯) and Soyeom (消炎). Frequently used acupuncture points were GB20, GV21, A-shi point, GV16, EX-B2, and SI15 in order. (3) The most commonly used total injection dosage was 1.0 cc at a time, and the frequency of treatment was twice a week. (4) Concurrent treatments such as acupuncture, herbal medication, physical therapy and Chuna manual therapy were performed in all 17 studies. (5) Pharmacopuncture therapy showed positive effects on cervical pain caused by traffic accidents in all 17 studies reviewed. Conclusion: Pharmacopuncture therapy was effective in cervical pain caused by traffic accidents in all 17 studies selected. Further studies will be needed using more larger scales and more objective data to confirm the effectiveness of pharmacopuncture therapy and to generalize its application.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.168-178
• /
• 2017

In order to prevent major and chemical accidents, some of the plants which would like to install and operate hazard chemicals handling facilities must submit Off-site Consequence Analysis due to recent arisen leak accidents since 2015. A lot of chemical industrials choose gas detectors as mitigation equipment to early detect gas vapor. The way of placement of gas detectors has two methods; Code-based Design(CBD) and Performance-based Design. The CBD has principles for gas detectors to be installed with consideration for the place that is expected to accumulate gas, and the leak locations according to legal standards and technical guidelines, and has a possibility to be unable to detect by these rules to locate gas detectors by vapor density information. The PBD has two methods; a Geographic Method and Scenario based Method. The Scenario-based Method has been suggested to make up for the Geographic Coverage Method. This Scenario-based Method draw the best optimum placement of gas detectors by considering leak locations, leak speed information, leak directions and etc. However, the domestic placement guidelines just refers to the CBD. Therefore, this study is to compare existing placement location of gas detectors by the domestic CBD with placement locations, coverages and the number of gas detectors in accordance with the Scenario-based Method. Also this study has measures for early detecting interest of Vapor Cloud and suitable placement of gas detectors to prevent chemical accidents. The Phast software was selected to simulate vapor cloud dispersion to predict the consequence. There are two cases; an accident hole size of leak(8 mm) from API which is the highst accident hole size less than 24.5 mm, and a normal leak hole size from KOSHA Guide (1.8 mm). Detect3D was also selected to locate gas detectors efficiently and compare CBD results and PBD results. Currently, domestic methods of gas detectors do not consider any risk, but just depend on domestic code methods which lead to placement of gas detectors not to make personnels recognize tolerable or intolerable risks. The results of the Scenario-based Method, however, analyze the leak estimated range by simulating leak dispersion, and then it is able to tell tolerable risks. Thus it is considered that individuals will be able to place gas detectors reasonably by making objectives and roles flexibly according to situations in a specific plant.

• Journal of Environmental Health Sciences
• /
• v.46 no.4
• /
• pp.423-432
• /
• 2020

Objectives: In this study, we analyzed the current state of delivery containers and packages and established handling guidelines to safely transport delivery containers and packages for use in research, testing, and examination reagents. Methods: Handling guidelines were revised in such categories as maintenance of the handling facilities, storage, loading and unloading, containers and packages, transportation, etc. In addition, we analyzed the current state of domestic sales for hazardous chemicals used for research, testing, and examination reagents, and investigated the handling guidelines related to delivery transportation in the USA, EU, and Japan by chemical property. Results: There are 6,160 companies selling hazardous chemicals. Among them, the 476 companies selling reagents for use in research, testing, and examination were investigated. Total amounts handled reached 425,000 tons, contributing to 0.2% of the total. For delivery transportation, internal containers and packaging was specified for chemical properties as follows: within 1 L for flammable gas, within 5 L for flammable liquid, and within 18 L for others. In addition, the maximum size of the outer package was set within 130 cm for total length, width, and height, and no dimension of the packaging could exceed 60 cm. Sixty-four hazardous chemicals with explosiveness or acute inhalation toxicity were prohibited for delivery transportation. Conclusion: Specified handling guidelines for inner and outer containers as well as packaging were regulated for delivery transportation of hazardous chemicals used for reagents. In addition, 64 hazardous chemicals were prohibited for delivery transportation. These are designed to prevent transportation accidents involving hazardous chemicals for reagents and thus protect the safety and health of transporters who handle hazardous chemicals.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.48-53
• /
• 2017

Since the number and the amount of toxic substances handled by domestic companies have been increased, the possibility of serious chemical accidents has become severe. According to Chemistry Safety Clearing-house (CSC), the number of chemical accidents for the last five years has been rapidly raised. A representative example which shows the serious impact of a chemical accident is HF (Hydrogen Fluoride) accident generated in Gumi in 2012. In order to make effective responses for mitigating losses of accidents, the most suitable consequence model has to be selected and implemented throughout the considerations of chemical properties and environments. Even if each consequence model has been verified by the results of experiments, it is necessary to analyze and compare the usability of them according to various scenarios. In this study, the Gumi HF accident is simulated by HGSYSTEM, which is the most specialized model for the release and dispersion of HF. It is found that the ending point of ERPG-2 is about 1 km from the accident point. In order to investigate the usability of the most representative consequence models (ALOHA and CARIS), the results of them are compared with one of HGSYSTEM.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.299-301
• /
• 2006

It is very important to protect life, property at sea and marine environments from any pollution. The RFID when it applies a technique, is able to raise the stability of vessel as controling the mobile course and an entrance and exit of the crews as well as previously preventing accident from the vessel. The RFID technique which is applied, It show the effect which prevents an accident in advance, Currently it is used plentifully from physical distribution field and RFID KS domestic Standard $860MHz{\sim}960MHz$ band use the crew has the RFID tag and it will grasp incoming, leaving and movement.