• Fibers and Polymers
• /
• 제2권2호
• /
• pp.81-85
• /
• 2001

The effects of rate of phase separation to ester interchange reactions and the repulsive pair interaction energy on the phase behavior in a phase-separated immiscible polyester blend are investigated using a Monte Carlo simulation method. The time evolution of structure factor and the degree of randomness are monitored as a function of homogenization time. When the phase separation is dominant over ester interchange reactions, the domain size slowly increases with homogenization time. However, when the pair interaction becomes less repulsive, the domain size does not significantly change with homogenization time. On the other hand, when ester interchange reactions are dominant over the phase separation, the homogenization proceeds without a change in the domain size. The higher the extent of phase separation, the lower the increasing rate of the DR. However, when the phase separation is sufficiently dominant, the effect of the extent of phase separation on the increasing rate of the degree of randomness become less significant.

• 대한기계학회논문집A
• /
• 제28권4호
• /
• pp.370-377
• /
• 2004

The density approach and the homogenization design method are representative methods in topology optimization problems. In the topology optimization in magnetic fields, those methods are applied based on the results of the applications In elastic fields. In this study, the density method is modified considering the concept of the homogenization design method. Also, the results of the topology optimization in magnetic fields by the modified density method as well as the homogenization method are compared especially focusing the change of the penalization parameter in the density approach. The effect of the definition of the design domain such as global/local design domain is also discussed.

• Nuclear Engineering and Technology
• /
• 제45권6호
• /
• pp.707-720
• /
• 2013

We analyze piecewise homogenization with flux-weighted cross sections and preservation of averaged currents at the boundary of the homogenized domain. Introduction of a set of flux discontinuity ratios (FDR) that preserve reference interface currents leads to preservation of averaged region reaction rates and fluxes. We consider the class of numerical discretizations with one degree of freedom per volume and per surface and prove that when the homogenization and computing meshes are equal there is a unique solution for the FDRs which exactly preserve interface currents. For diffusion submeshing we introduce a Jacobian-Free Newton-Krylov method and for all cases considered obtain an 'exact' numerical solution (eight digits for the interface currents). The homogenization is completed by extending the familiar full assembly homogenization via flux discontinuity factors to the sides of regions laying on the boundary of the piecewise homogenized domain. Finally, for the familiar nodal discretization we numerically find that the FDRs obtained with no submesh (nearly at no cost) can be effectively used for whole-core diffusion calculations with submesh. This is not the case, however, for cell-centered finite differences.

• Coupled systems mechanics
• /
• 제7권1호
• /
• pp.61-77
• /
• 2018

This paper establish a high concentration ratio approximation of linear elastic properties of materials with periodic microstructure with cubic inclusions. The approximation is derived using first few terms of power series expansion of the solution of the equivalent eigenstrain problem with a homogeneous eigenstrain approximation. Viability of the approximation at high concentration ratios is proved by comparison with a numerical solution of the homogenization problem. To this end some theoretical result of symmetry properties of the homogenization problem are given. Using these results efficient numerical computation on a reduced computational domain is presented.

• Advances in aircraft and spacecraft science
• /
• 제9권3호
• /
• pp.217-242
• /
• 2022

This paper proposes a novel time-domain homogenization model combining the viscoelastic constitutive law with Eshelby's inclusion theory-based micromechanics model to predict the mechanical behavior of the particle reinforced composite material. The proposed model is intuitive and straightforward capable of predicting composites' viscoelastic behavior in the time domain. The isotropization technique for non-uniform stress-strain fields and incremental Mori-Tanaka schemes for high volume fraction are adopted in this study. Effects of the imperfectly bonded interphase layer on the viscoelastic behavior on the dynamic mechanical behavior are also investigated. The proposed model is verified by the direct numerical simulation and DMA (dynamic mechanical analysis) experimental results. The proposed model is useful for multiscale analysis of viscoelastic composite materials, and it can also be extended to predict the nonlinear viscoelastic response of composite materials.

• 한국전산구조공학회논문집
• /
• 제25권4호
• /
• pp.315-321
• /
• 2012

본 연구에서는 분자동역학 전산모사와 유한요소해석 기반의 균질화 기법을 통해 나노복합재의 열전도 특성을 정확하고 효율적으로 예측할 수 있는 순차적 멀티스케일 균질화 해석기법을 제안하였다. 나노입자의 크기효과가 나노복합재의 유효 열전도 특성에 미치는 영향을 조사하기 위해 크기가 다른 구형 나노입자가 첨가된 나노복합재의 열전도 계수를 분자동역학 전산모사를 통해 예측했고, 그 결과 나노입자의 크기가 작아질수록 계면에서의 Kapitza열저항에 의해 나노복합재의 열전도 계수가 점차 감소하는 것으로 나타났다. 이러한 나노입자의 크기효과를 균질화 해석모델을 통해 정확하게 묘사하기 위해 Kapitza 열저항에 의한 계면에서의 온도 불연속 구간과 고분자 기지가 높은 밀도를 가지며 흡착되는 유효계면을 추가적인 상으로 도입하여 나노복합재를 입자, Kapitza 계면, 유효계면, 기지로 구성된 4상의 연속체 구조로 모델링하였다. 이후 순차적 멀티스케일 균질화 해석기법을 통해 유효계면의 열전도 계수를 나노복합재의 열전도 계수로부터 역으로 예측했으며, 이를 입자의 반경에 대한 함수로 근사하였다. 근사 함수를 토대로 다양한 입자 체적분율과 반경에 대한 나노복합재의 유효 열전도 특성을 예측하였으며, 유효계면에 대한 매개변수 연구를 수행하였다.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1613-1620
• /
• 2001

This study is focused on the application of the homogenization design method (HDM) to reduce the vibration level of a structure excited by magnetic harmonic farces. This is accomplished by obtaining the optimal material distribution in a design domain to minimize the frequency response caused by the magnetic harmonic excitation. The Maxwell stress method is used to compute the magnetic force and the HDM is applied leer the optimization. The developed method is applied to a simple pole model that is excited by the harmonic bending farce caused by the current around an adjacent stator. Results shows that the HDM is valid to minimize the frequency response.

• 폴리머
• /
• 제27권5호
• /
• pp.413-420
• /
• 2003

형광 현미경을 이용하여 4-클로로-7-니트로벤조퓨라잔이 표지된 폴리스티렌과 폴리부타디엔 블렌드 디옥틸프탈레이트 용액의 전단력하에서의 상평형 거동을 관찰하였다. 형광 현미경과 위상차 현미경을 동시에 사용하여 형광이미지가 실제 블렌드용액의 모폴로지와 같음을 알 수 있었다. 형광 현미경을 이용하여 각 도메인에서 형광의 세기를 측정함으로써 도메인상 (폴리스티렌 풍부상)과 연속 매트릭스상 (폴리부타디엔 풍부상)이 외부에서 가해준 전단력에 의하여 조성비가 변화하는 것을 관찰하였다. 이렇게 측정되어진 전단력의 변화에 따른 조성 차이의 변화로부터 상분리 곡선이 이동함을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.224-232
• /
• 1999

Topology optimization has evolved into a very efficient concept design tool and has been incorporated into design engineering processes in many industrial sectors. In recent years, topology optimization has become the focus of structural design community and has been researched and applied widely both in academia and industry. There are mainly tow approaches for topology optimization of continuum structures ; homogenization and density methods. The homogenization method is to compute is to compute an optimal distribution of microstructures in a given design domain. The sizes of the micro-calvities are treated as design variables for the topology optimization problem. the density method is to compute an optimal distribution of an isotropic material, where the material densities are treated as design variables. In this paper, the density method is used to formulate the topology optimization problem. This optimization problem is solved by using an optimality criteria method. Several example problems are solved to show the usefulness of the present approach.

• 한국전산구조공학회논문집
• /
• 제21권1호
• /
• pp.13-20
• /
• 2008

기능경사 소재(FGM)에는 서로 다른 두 가지 구성입자들이 혼합되어 있는 경사층(graded layer)이 삽입되어, 소재 전 영역에 걸쳐 구성입자의 체적분율이 연속적이고 기능적으로 변화하도록 되어있다. 이러한 이상(dual-phase) 입자복합재의 열 기계적 거동을 해석함에 있어 필수적인 경사층의 물성치는 전통적으로 균질화 기법을 이용하여 예측되었다. 하지만, 이러한 균질화 기법은 구성입자의 형태, 분산구조 등과 같은 상세 형상을 반영하지 못하지 때문에 복합재의 총체적인 등가 물성치 예측에만 국한 되어왔다. 이러한 맥락에서 본 연구에서는 경사층을 미시역학적으로 이산화 모델링하고, 다양한 체적분율과 외부 하중조건에 대해 유한요소해석을 실시하여 이러한 균질화 기법들의 특성을 분석하였다.