• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.843-848
• /
• 1996

Porous resin beads of Poly(styrene-co-divinylbenzene) have been prepared by suspension polymerization. The bead could be made porous in the region above 30wt% of the crosslinking agent(divinylbenzene ) and the porogenic agent(toluene), respectively. The specific surface area of porous beads increased with increasing the concentrations of divinylbenzene and toluene. The specific surface area of the porous resin bead decreased, when sulfonated with concentrated sulfuric acid. The catalytic activity of sulfonated resin catalyses increased with increasing the degree of crosslinking in the liquid-phase reesterification of ethyl acetate with 1-propanol. The adsorbed quantity of sodium dodecylbenzene sulfonate in an aqueous solution also increased with increasing surface area of porous resins.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.1
• /
• pp.63-68
• /
• 2002

Amount of styrene and divinylbenzene(DVB) was adjusted under injection of nitrogen, copolymer having crosslink of 1%, 2% and 5% was synthesized and zinc chloride was added to it. Put into benzene, swell it, add potassium iodide and 1-aza-15-crown-5 of 21.93g in toluene solution and functional resin which can adsorb heavy metal ions by stir reflex at $55^{\circ}C$ for 30 hours was synthesized. The content of divinylbenzene of this resin was increased as crosslink increase, macroporous gets smaller and the content of chlorine was reduced, which affects macrocyclic ligand in the process of substitution and content of nitrogen was also reduced. And the form of functional synthetic resin was distorted by substitution reaction of hydrogen and chlorine atoms.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.483-490
• /
• 2009

Stable poly(styrene-co-divinylbenzene) [P(St-co-DVB)] micro spheres with narrow size distribution were synthesized in the presence of 2,2'-azobis(2,4-dimethyl valeronitrile) (V-65) and co-initiator in an acetone/water mixture in the precipitation polymerization at $53^{\circ}C$ for 24 h. Potassium peroxodisulfate (KPS), ammonium peroxodisulfate (APS) and sodium peroxodisulfate (NaPS) were used as co-initiators. The optimum ratio of acetone to water for the formation of a narrow distribution of P(St-co-DVB) particles was 49:11 (g/g). The optimum co-initiator compositions for narrow distribution were 9:1 (g/g) for V-65 to KPS, 11:1 for V-65 to APS and 6:1 for V-65 to NaPS. The yield for these compositions was $54{\sim}57%$ and the largest particle size was obtained with the lowest zeta-potential and CV values. From the XPS measurements, the charge density was increased but the zeta potential decreased with increasing sulfur content, implying that the sulfate group provides the electrostatic stabilization on the particle surface. This suggested that the self-crosslinking between styrene and DVB, the electrostatic stabilization of initiators, and the balanced hydrophobic and hydrophilic properties of the solvents are responsible for the formation of stable P(St-co-DVB) spherical particles with narrow size distribution.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.680-688
• /
• 1998

The macroreticular (MR) type glycidylmethacrylate (GMA)-divinylbenzene (DVB) copolymer (polyglycidylmethacrylate) beads (RG) were prepared by a suspension polymerization using 0~100 vol % of 2,2,4-trimethylpentane (TMP) as a diluent. Macroreticular type cation exchange resins containing phosphoric acid groups (RGP) were prepared by the reaction of GMA-DVB copolymer and poly (glycidyl methacrylate) bead (RG) with phosphoric acid in the presence of benzene. In this study, the effect of degree of crosslinking and the amount of the diluent on physical properties and adsorbability of uranium of RGP resins were investigated respectively. The chemical and physical properties of RGP resins were affected by both of the amount of the diluent and the degree of crosslinking. The effect of degree of crosslinking on the adsorbed amount of uranium for RGP resins were decreased in the order of $$RGP-10(50){\sim_=}RGP-1(50)>RGP-2(50)>RGP-5(50)>RGP-0$$. The effect of the diluent amount were as follows RGP-2(100)>RGP-2(75)>RGP-2(50)>RGP-2(30)>RGP-2(0). The crosslinking degree effect on uranium adsorbability depended on pore structure, cation exchange capability and swelling ratio. On the other hand, the effect of the diluent amount were relied on surface area and pore structure raher than cation exchange capability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.24-30
• /
• 2018

Various investigations of vegetable oil extracted from natural resources are underway because of their low cost and environmental value. On the other hand, the double bonds in vegetable oil should be substituted to other high reactive functional groups due to their low reactivity for synthesizing bio-polymeric materials. ${\alpha}$-eleostearic acid, which consists of a conjugated triene, is the main component of tung oil, and the conjugated triene allows tung oil to have higher reactivity than other vegetable oils. In this study, tung oil was copolymerized with styrene and divinylbenzene to make a thermoset resin without any substitution of functional groups. The thermal and mechanical properties were measured to examine the effects of the composition of each monomer on the synthesized thermoset resin. The results showed that the products have only one Tg, which means the synthesized thermoset resins are homogeneous at the molecular level. The mechanical properties show that tung oil acts as a soft segment in the copolymer and makes a more elastic product. On the other hand, divinylbenzene acts as a hard segment and makes a more brittle product.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.2
• /
• pp.9-15
• /
• 2003

Resins have been synthesized from chlormethyl styrene 1,4- divinylbenzene(DVB) with 1%, 4%, and 20%-crosslinked and macrocyclic ligand of cryptand type by copolymerization method and the adsorption of uranium(VI), nickel(II) and lutetium(III) ions have been investigated in various experimental conditions. The correlation between the adsorption characteristics of rare earths and transition metal on the resins and stability constants of complexes with macrocyclic ligand have been examined. The uranium ion was not adsorbed on the resins below pH 2.0, but the power of adsorption of uranium ion increased rapidly above pH 3.0. The adsorption power was in the order of 1%, 4% and 20%-crosslinked resin, but adsorptive characteristics of resins decreased in proportion to the order of dielectric constants of solvents.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.754-758
• /
• 2001

In order to use vesicle as a space of polymerization, monomer and cross-linking agent were put into hydrophobic part of vesicle. The vesicle solution of dimethyldioctadecylammonium bromide was formed by ultrasonication. Styrene and divinylbenzene were put into this solution and polymerization was conducted by adding AIBN. The polymer with sphere-shaped structure was obtained by removing all of the surfactant by extraction of ethanol And using methyl methacrylate and ethylene glycol dimethacrylate, this sphere-shaped polymer structure was also formed.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.1 s.63
• /
• pp.49-56
• /
• 2007

The effects of pH, time, dielectric constant of solvent and crosslink on adsorption of metal ions by 1-aza-18-crown-6-styrene-DVB(divinylbenzene) resin(resin) adsorbent were investigated. The metal ions were showed fast adsorption on the resins in over pH 3. The equilibrium time for adsorption of metallic ions was about two hours and the adsorption selectivity determined in methanol was in increasing order $UO_2^{2+}>Mg^{2+}>Ho^{3+}$ ions. The adsorption was in the order of 1%, 2% and 4% crosslink resin and adsorption of resin decreased in proportion to the order of dielectric constant of solvents.

• Journal of the Korean Chemical Society
• /
• v.22 no.3
• /
• pp.184-193
• /
• 1978

Various aluminum chloride polymeric catalysts have been prepared by the reaction of anhydrous aluminum chloride with styrene-divinylbenzene copolymer bead in the carbon disulfide solvent. The shapes of aluminum chloride polymeric catalysts have been investigated by the use of optical microscope, scanning electron microscope and analysis of atomic absorption and electron microprobe X-ray. The catalytic effect of aluminurn chloride polymeric catalysts in the process of esterification of various organic acids with several aliphatic and aromatic alcohols have been studied.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.1
• /
• pp.57-65
• /
• 2008

Resins were synthesized with 1-aza-15-crown-5 macrocyclic ligand attached to styrene(dangerous matter) divinylbenzene(DVB) copolymer with crosslink of 1, 2, 6 and 15% by substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, time and crosslink on adsorption of metal ion　from water fire extinguishing agent by the synthetic resin adsorbent were investigated. The metal ion was showed fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in water was in increasing order of $Mg^{2+}>Al^{3+}>Pb^{2+}$. The adsorption was in the order of 1, 2, 6, and 15% crosslink resin.